Thank you for the answers!
So, it seems that if you get it by or after October then you will be never make ROI, no? Based on current diff rises.
http://mining.thegenesisblock.com/a/2060a6ffde
Topic: DRILLBIT SYSTEM Miners - Avalon range available - Now $104.99! - page 118. (Read 273816 times)
September 01, 2013, 06:21:46 PM
September 01, 2013, 06:08:33 PM
So from what I understand, if I order the thumb then it costs $104 including shipping? The assembly and whatnot is done in the USA, or in Europe/Asia?
Do they have the chips already for the currently in stock thumbs, or are they waiting for a shipment from bitfury?
Do we have any idea for time frame if we order right now? (1 Week, 2 Weeks (tm), a month?).
The Jhon K escrow does not cover issues such as late shipment, correct?
Do they have the chips already for the currently in stock thumbs, or are they waiting for a shipment from bitfury?
Do we have any idea for time frame if we order right now? (1 Week, 2 Weeks (tm), a month?).
The Jhon K escrow does not cover issues such as late shipment, correct?
* Updates Aug 17th
- Chips ordered! Big thanks to Dave at Megabigpower for allowing us to secure a reel at the old price, because the prices are going up!
- Board design finished. Photo up
These fine folks are in Australia I believe.
Above says they were ordered on 8-17. Bitfury expects to ship by the end of this month... and people have been receiving bitfury on time... Barntech is then expecting a quick turn around on assembly time to have the products shipping October-November.
So I just finished reading everything properly...
Have I correctly interpreted that a "DrillBit Thumb" is going to power 2 bitfury chips and cost approximately $100 USD?
And begin assembly in October
Have I correctly interpreted that a "DrillBit Thumb" is going to power 2 bitfury chips and cost approximately $100 USD?
And begin assembly in October
Hey stack.
We are leaning more towards the 1 chip thumb at this point. Pricing is not yet locked down, but it will definitely be sub $100. And yes, shipping Oct/Nov
Cheers
Barntech
Here is the return policy of the company ordering chips for this group buy.
https://megabigpower.com/shop/index.php?route=account/return/insert
Hope that helps your questions.
September 01, 2013, 05:56:23 PM
So from what I understand, if I order the thumb then it costs $104 including shipping? The assembly and whatnot is done in the USA, or in Europe/Asia?
Do they have the chips already for the currently in stock thumbs, or are they waiting for a shipment from bitfury?
Do we have any idea for time frame if we order right now? (1 Week, 2 Weeks (tm), a month?).
The Jhon K escrow does not cover issues such as late shipment, correct?
Do they have the chips already for the currently in stock thumbs, or are they waiting for a shipment from bitfury?
Do we have any idea for time frame if we order right now? (1 Week, 2 Weeks (tm), a month?).
The Jhon K escrow does not cover issues such as late shipment, correct?
September 01, 2013, 04:54:38 PM
If anyone is looking is looking for hosting, I will be offering it very very cheap, with a well vetted and well organised international group.
September 01, 2013, 04:16:51 PM
just did paypal for 8 usb thumbs Barntech 
can you confirm you have received
Thanks
can you confirm you have received Thanks
Can you say why you won't wait for the 8 chip boards to come back in stock? Is it like the person who replied to me said, that you want anything from them asap?
September 01, 2013, 04:09:28 PM
just did paypal for 8 usb thumbs Barntech can you confirm you have received
Thanks
can you confirm you have received Thanks
Can you say why you won't wait for the 8 chip boards to come back in stock? Is it like the person who replied to me said, that you want anything from them asap?
September 01, 2013, 01:43:23 PM
just did paypal for 8 usb thumbs Barntech can you confirm you have received
Thanks
can you confirm you have received Thanks
September 01, 2013, 11:48:08 AM
Sweet jesus this looks awesome! As someone who is a late comer, do you recommend I just buy the USB miner instead of waiting for the 8 chip boards to come back in stock?
Still no news about a second batch or not, as the chip prices are rising.So if you seriously wanna get something from Drillbit, I would say get an USB first.
September 01, 2013, 11:42:41 AM
Sweet jesus this looks awesome! As someone who is a late comer, do you recommend I just buy the USB miner instead of waiting for the 8 chip boards to come back in stock?
September 01, 2013, 09:26:30 AM
A miner who sells units here in Germany, recommended the following two (but for other rigs, they are 400w). Any comments on them as they are said to be very efficient. edit Or would they be less efficient than a 200 watt PS? I know you should only run them at half or so for max efficiency?
http://www.fspgroupusa.com/aurum-gold-400-au400/p/831.html
http://www.super-flower.de/index.php?id=109
http://www.fspgroupusa.com/aurum-gold-400-au400/p/831.html
http://www.super-flower.de/index.php?id=109
They both look fine to me, but I'm not an expert on PSU's, I've just been doing a ****ton of research.
FSP Aurum and Raider are good units going off reviews, and Superflower can put out some pretty sweet units. Speaking of which... here's another candidate: http://www.techpowerup.com/reviews/Kingwin/STR-500/5.html
OEM is Superflower: http://www.tomshardware.com/reviews/power-supply-oem-manufacturer,2913-7.html
And here's another review: http://www.silentpcreview.com/article1220-page6.html
Pretty much a perfect PSU in it's wattage range.
September 01, 2013, 07:53:52 AM
Anyone - Would be great to have a recommendation for a power supply to power the Drill Bit systems, both for one unit and 4 unit with backplane.
I'm a bit new here and would appreciate the help. Also, for those of us running things at home, a quieter PS would be preferable!
Thx,
IAS
I'm a bit new here and would appreciate the help. Also, for those of us running things at home, a quieter PS would be preferable!
Thx,
IAS
I'll just use the Corsair AX860i from my GPU mining rig. Good efficiency at the sub-100W load of 4x Drillbit boards, as seen here:
http://www.techpowerup.com/reviews/Corsair/AX860i/6.html (scroll down to "Efficiency at Low Loads")
The next best contenders I've found so far, for anyone looking to buy new:
http://www.techpowerup.com/reviews/Corsair/AX760/6.html
http://www.techpowerup.com/reviews/Seasonic/SS-460FL_V2/6.html
AFAIK, even pico-PSU's struggle to be ~85% efficient here. And even if you found the perfect sub-200W power supply with over 90% efficiency, you'd only save a couple of watts from the wall. Better to get the ATX units above and be able to re-use them in a future PC. At worst, you'd get a very good price selling them even a year from now, as they're all 80PLUS Platinum and high-quality Seasonic made units.
I will second any recommendation for Seasonic power supplies. I've used Seasonic power supplies for years without a single failure, they really seem to be the best manufacturer.
September 01, 2013, 05:10:10 AM
Anyone - Would be great to have a recommendation for a power supply to power the Drill Bit systems, both for one unit and 4 unit with backplane.
I'm a bit new here and would appreciate the help. Also, for those of us running things at home, a quieter PS would be preferable!
Thx,
IAS
I'm a bit new here and would appreciate the help. Also, for those of us running things at home, a quieter PS would be preferable!
Thx,
IAS
I'll just use the Corsair AX860i from my GPU mining rig. Good efficiency at the sub-100W load of 4x Drillbit boards, as seen here:
http://www.techpowerup.com/reviews/Corsair/AX860i/6.html (scroll down to "Efficiency at Low Loads")
The next best contenders I've found so far, for anyone looking to buy new:
http://www.techpowerup.com/reviews/Corsair/AX760/6.html
http://www.techpowerup.com/reviews/Seasonic/SS-460FL_V2/6.html
AFAIK, even pico-PSU's struggle to be ~85% efficient here. And even if you found the perfect sub-200W power supply with over 90% efficiency, you'd only save a couple of watts from the wall. Better to get the ATX units above and be able to re-use them in a future PC. At worst, you'd get a very good price selling them even a year from now, as they're all 80PLUS Platinum and high-quality Seasonic made units.
Thanks a lot for the reply. I'll check those out.
A miner who sells units here in Germany, recommended the following two (but for other rigs, they are 400w). Any comments on them as they are said to be very efficient. edit
http://www.fspgroupusa.com/aurum-gold-400-au400/p/831.html
http://www.super-flower.de/index.php?id=109
Thanks again,
IAS
September 01, 2013, 04:56:43 AM
Anyone - Would be great to have a recommendation for a power supply to power the Drill Bit systems, both for one unit and 4 unit with backplane.
I'm a bit new here and would appreciate the help. Also, for those of us running things at home, a quieter PS would be preferable!
Thx,
IAS
I'm a bit new here and would appreciate the help. Also, for those of us running things at home, a quieter PS would be preferable!
Thx,
IAS
I'll just use the Corsair AX860i from my GPU mining rig. Good efficiency at the sub-100W load of 4x Drillbit boards, as seen here:
http://www.techpowerup.com/reviews/Corsair/AX860i/6.html (scroll down to "Efficiency at Low Loads")
The next best contenders I've found so far, for anyone looking to buy new:
http://www.techpowerup.com/reviews/Corsair/AX760/6.html
http://www.techpowerup.com/reviews/Seasonic/SS-460FL_V2/6.html
AFAIK, even pico-PSU's struggle to be ~85% efficient here. And even if you found the perfect sub-200W power supply with over 90% efficiency, you'd only save a couple of watts from the wall. Better to get the ATX units above and be able to re-use them in a future PC. At worst, you'd get a very good price selling them even a year from now, as they're all 80PLUS Platinum and high-quality Seasonic made units.
EDIT: Whoops, the AX860i is actually made by Flextronics, which is just as good. The regular AX860 (80+ Platinum) is made by Seasonic.
September 01, 2013, 04:07:20 AM
Hey guys! Just like to announce that I have finished *i hope* the redesign of the site!
http://www.drillbitsystem.com/
Check it out!
http://www.drillbitsystem.com/
Check it out!
Looks really nice. Again, love the Bitcoin dude you created (but where are the coins he is mining?
)Anyone - Would be great to have a recommendation for a power supply to power the Drill Bit systems, both for one unit and 4 unit with backplane.
I'm a bit new here and would appreciate the help. Also, for those of us running things at home, a quieter PS would be preferable!
Thx,
IAS
September 01, 2013, 03:47:37 AM
Hey guys! Just like to announce that I have finished *i hope* the redesign of the site!
http://www.drillbitsystem.com/
Check it out!
http://www.drillbitsystem.com/
Check it out!
September 01, 2013, 02:45:39 AM
That is indeed awesome news Any chance of getting more chips? I`d be veeery very interested on a few boards.
Any chance of getting more chips? I`d be veeery very interested on a few boards. August 31, 2013, 11:47:04 PM
Yes, great to see them shipping on time. This is exciting news. Lets hope they can keep it up and all goes smoothly!
August 31, 2013, 11:01:45 PM
I would love to run a farm of these.... oh the bitcoin porn.
August 31, 2013, 10:39:27 PM
Imagine that.........an ASIC company shipping on time 
Awesome news!!!!!!!!!!!!!!!! Its about time someone did it right
Awesome news!!!!!!!!!!!!!!!! Its about time someone did it right
August 31, 2013, 02:57:27 PM
that's great news. about bitfury shipping products
Jump to: