DRILLBIT SYSTEM Miners - Avalon range available - Now $104.99! - page 41.

DyslexicZombei

sr. member

Activity: 364

Merit: 250

Thanks GG bobsag3!

Beautiful product barntech. Congrats!

I also have a Drillbit board that's being hosted with bobsag3 at Miner Hosting LLC (in addition to about 10-15 TH on the way, joining our co-op's ~6TH already on site from 7 rounds). bobsag3 is about as perfect a vetted miner host and reseller that you'll find, if you've ever had hardware hosted with him or bought from him before at minersource.net

Of course: I'm biased as his marketing/vetting agent for hosting and business partner in new ventures. Cheesy

bobsag3

hero member

Activity: 546

Merit: 500

Owner, Minersource.net

Something something picture pron

daddyfatsax

hero member

Activity: 857

Merit: 1000

Anger is a gift.

Thanks! I am posting there now.

lajz99

hero member

Activity: 756

Merit: 500

Quote from: daddyfatsax on November 28, 2013, 02:29:35 PM

I cannot post in the Drillbit forums yet

You can now!

Sorry guys, we get a TON of member requests, most of which are spam. Trying to keep an eye out as best I can.

daddyfatsax

hero member

Activity: 857

Merit: 1000

Anger is a gift.

I copied everything straight from the DB forums. I have used separate workers for the thumbs, plugged straight into the laptop, 3 different hubs, and messed with both int and ext clocks and voltage.

beavertank

member

Activity: 94

Merit: 10

.

Quote from: daddyfatsax on November 28, 2013, 02:29:35 PM

Quote from: lajz99 on November 28, 2013, 01:04:00 PM

For those of you using thumbs I'm getting 3.2gh/s running at ext:260:1:950 with very few hardware errors in case anyone is curious. I have some major cooling on the thumb and it was stable overnight.

Again, as suggested in the forum ramp up slowly and watch for errors. Don't damage your thumbs!

I cannot post in the Drillbit forums yet, but I am having the same problem with my D-link hubs and Anker. Right now mine are on a Rosewill 7 port hub, they are the only 2 things plugged in and I am only getting about 2.2 gh/s per device. I have tried pushing them to 300:1:950 and they do not even get warm and hash rate stays about the same.

That's strange... have you double checked your command line options to make sure it's not formatted wrong somehow and being ignored?

daddyfatsax

hero member

Activity: 857

Merit: 1000

Anger is a gift.

Quote from: lajz99 on November 28, 2013, 01:04:00 PM

For those of you using thumbs I'm getting 3.2gh/s running at ext:260:1:950 with very few hardware errors in case anyone is curious. I have some major cooling on the thumb and it was stable overnight.

Again, as suggested in the forum ramp up slowly and watch for errors. Don't damage your thumbs!

I cannot post in the Drillbit forums yet, but I am having the same problem with my D-link hubs and Anker. Right now mine are on a Rosewill 7 port hub, they are the only 2 things plugged in and I am only getting about 2.2 gh/s per device. I have tried pushing them to 300:1:950 and they do not even get warm and hash rate stays about the same.

bobsag3

hero member

Activity: 546

Merit: 500

Owner, Minersource.net

Quote from: vulgartrendkill on November 28, 2013, 01:21:10 PM

Quote from: bobsag3 on November 28, 2013, 01:15:00 PM

Sorry for the reply times on the tracking numbers, I passed out last night Sad

.

Most people should have either gotten an email with the tracking, or anyone who has PM'ed me has now been sent theirs.

Does this include us European folk, or is Barn dealing with that side?

Thx

I have only the US orders... and One order from Bulgaria.

vulgartrendkill

hero member

Activity: 518

Merit: 500

Quote from: bobsag3 on November 28, 2013, 01:15:00 PM

Sorry for the reply times on the tracking numbers, I passed out last night Sad

.

Most people should have either gotten an email with the tracking, or anyone who has PM'ed me has now been sent theirs.

Does this include us European folk, or is Barn dealing with that side?

Thx

bobsag3

hero member

Activity: 546

Merit: 500

Owner, Minersource.net

Sorry for the reply times on the tracking numbers, I passed out last night Sad

.

Most people should have either gotten an email with the tracking, or anyone who has PM'ed me has now been sent theirs.

lajz99

hero member

Activity: 756

Merit: 500

For those of you using thumbs I'm getting 3.2gh/s running at ext:260:1:950 with very few hardware errors in case anyone is curious. I have some major cooling on the thumb and it was stable overnight.

Again, as suggested in the forum ramp up slowly and watch for errors. Don't damage your thumbs!

koltz

newbie

Activity: 18

Merit: 0

Still waiting for me ad I sent a PM.

beavertank

member

Activity: 94

Merit: 10

.

Quote from: eman5oh on November 28, 2013, 09:02:29 AM

@bobsag no need for the tracking number, I got an email from ups mychoice and my miner will arrive tomorrow! WOOT

Me too. Sweet! It also says delivery by 11:59 pm, which may mean I spend all day specifically waiting for the boards. We shall see.

eman5oh

newbie

Activity: 57

Merit: 0

@bobsag no need for the tracking number, I got an email from ups mychoice and my miner will arrive tomorrow! WOOT

Zeek_W

sr. member

Activity: 336

Merit: 250

Quote from: rob143 on November 28, 2013, 04:44:42 AM

I would like to see assembly in Australia. I am all for local businesses getting a boost from the btc boom.

That's what a number of us were hoping for from the get go.

JBT

full member

Activity: 165

Merit: 100

so i hope my 8board is on its way.....7days +- to go

rob143

member

Activity: 138

Merit: 10

I would like to see assembly in Australia. I am all for local businesses getting a boost from the btc boom.

Unacceptable

legendary

Activity: 2212

Merit: 1001

Quote from: thegun69 on November 28, 2013, 02:15:22 AM

Quote from: Unacceptable on November 28, 2013, 01:46:31 AM

Quote from: thegun69 on November 28, 2013, 01:21:59 AM

Quote from: southerngentuk on November 28, 2013, 12:56:47 AM

Quote from: sprint347 on November 27, 2013, 11:41:32 PM

Quote from: Tommo_Aus on November 27, 2013, 10:20:36 PM

Anyone else find it a bit ironic that as Australians we chose this group buy because its local, therefore we'd be getting the boards first out of everyone but looks like we'll be the last? Maybe ironic isn't the right word, but I had to chuckle to myself.

Not having a dig only sharing a thought I've had.

Quote

We are based in Sydney Australia, but accept orders worldwide. If you are located in Australia, this is a fantastic opportunity to get your hands on locally built quality miners, saving on shipping costs and helping build the Australian Bitcoin network. Assembly and production will be done either here in Sydney or San Francisco or both.

Yes

Yes, but we also trusted them to do what is best for development and production, I think they have done a fine job.

I also chose them as they are within traveling distance, so i could come in the middle of the
night if they run of with my money. Wink

glad that's not necessary. Grin

+1

I would've hired Y I FU's China mob guys to get my money Cheesy

couldn't we find sydney-based ones in the phone book? support local business and all..

LMAO...........but they have such a good reference from Y I FU Cheesy

They did scare him enough to stop everything he was doing & go into hiding.........wait,we want folks we're after to stay active IRL,nevermind Cheesy

Just kidding!!!!!!!! Great job Barntech,hope you get a 3rd batch going....soon!!!! Wink

thegun69

newbie

Activity: 12

Merit: 0

Quote from: Unacceptable on November 28, 2013, 01:46:31 AM

Quote from: thegun69 on November 28, 2013, 01:21:59 AM

Quote from: southerngentuk on November 28, 2013, 12:56:47 AM

Quote from: sprint347 on November 27, 2013, 11:41:32 PM

Quote from: Tommo_Aus on November 27, 2013, 10:20:36 PM

Anyone else find it a bit ironic that as Australians we chose this group buy because its local, therefore we'd be getting the boards first out of everyone but looks like we'll be the last? Maybe ironic isn't the right word, but I had to chuckle to myself.

Not having a dig only sharing a thought I've had.

Quote

We are based in Sydney Australia, but accept orders worldwide. If you are located in Australia, this is a fantastic opportunity to get your hands on locally built quality miners, saving on shipping costs and helping build the Australian Bitcoin network. Assembly and production will be done either here in Sydney or San Francisco or both.

Yes

Yes, but we also trusted them to do what is best for development and production, I think they have done a fine job.

I also chose them as they are within traveling distance, so i could come in the middle of the
night if they run of with my money. Wink

glad that's not necessary. Grin

+1

I would've hired Y I FU's China mob guys to get my money Cheesy

couldn't we find sydney-based ones in the phone book? support local business and all..

Unacceptable

legendary

Activity: 2212

Merit: 1001

Quote from: thegun69 on November 28, 2013, 01:21:59 AM

Quote from: southerngentuk on November 28, 2013, 12:56:47 AM

Quote from: sprint347 on November 27, 2013, 11:41:32 PM

Quote from: Tommo_Aus on November 27, 2013, 10:20:36 PM

Anyone else find it a bit ironic that as Australians we chose this group buy because its local, therefore we'd be getting the boards first out of everyone but looks like we'll be the last? Maybe ironic isn't the right word, but I had to chuckle to myself.

Not having a dig only sharing a thought I've had.

Quote

We are based in Sydney Australia, but accept orders worldwide. If you are located in Australia, this is a fantastic opportunity to get your hands on locally built quality miners, saving on shipping costs and helping build the Australian Bitcoin network. Assembly and production will be done either here in Sydney or San Francisco or both.

Yes

Yes, but we also trusted them to do what is best for development and production, I think they have done a fine job.

I also chose them as they are within traveling distance, so i could come in the middle of the
night if they run of with my money. Wink

glad that's not necessary. Grin

+1

I would've hired Y I FU's China mob guys to get my money Cheesy

Topic: DRILLBIT SYSTEM Miners - Avalon range available - Now $104.99! - page 41. (Read 273811 times)