DRILLBIT SYSTEM Miners - Avalon range available - Now $104.99! - page 36.

nexus99

legendary

Activity: 910

Merit: 1000

Quote from: Unacceptable on November 29, 2013, 06:06:44 PM

Wow,these guys are smaller than I thought!!! Cheesy

Very well packed & had everything needed,USB cables(very cool ones too),plastic stands(I had some metal ones left over from my Klondike build,so didn't need em) & the tiny heatsinks Cool

After unpacking,my hand is there for a size comparison:

Up & runnin,one went zombie after a few minutes,guess I'll be waiting for firmware updates.No biggie though,I'm patient Wink

All in all I'm very happy,I know improvements will come,till then,mine it baby!!!!!!!!!!!

Thanks again Barntech & bobsag3,Fantastic job!!!!!!!!!!!!!!! Cool

Nice use of the floppy drive. :-)

milkbottlec

member

Activity: 95

Merit: 10

Quote from: techman05 on November 29, 2013, 07:04:48 PM

Quote from: milkbottlec on November 29, 2013, 06:54:59 PM

http://www.ebay.co.uk/itm/620W-Antec-Neo-Eco-Modular-PSU-82-Eff-80-PLUS-Bronze-EPS-12V-Quiet-Fan-ATX-/121210213697?pt=UK_Computing_PowerSupplies_EH&hash=item1c38b11541

http://www.ebay.co.uk/itm/520W-Antec-Neo-Eco-0-761345-285209-Modular-82-Eff-80-PLUS-Bronze-SLI-Cross-/360786073970?pt=UK_Computing_PowerSupplies_EH&hash=item5400869972

Which one is good for 2-4 boards?

Or any other cheap suggestions for UK?

If your doing them on a mini plane ...niether. I'd want to look for one with at least 2X6 pin plugs built in(more if your collecting the whole set). I've got a rosewill fortress 550w 80 plus platnum for over the top HTPC build (I'm not putting a graphics card in yet but I want it too be ready for whatever).

A quick run through newegg makes me think

a fractal (since I believe its supposed to be a good brand)
http://www.newegg.com/Product/Product.aspx?Item=N82E16817580008

or

corsair (BIG Known name brand)
http://www.newegg.com/Product/Product.aspx?Item=N82E16817139059

The 520W Antec have 1 x 6-pin and 1 x 8 (6+2)-pin PCI-E connectors, is that enough?
The mini plane needs 2 x 6-pin PCI-E connectors right?

techman05

hero member

Activity: 546

Merit: 500

Quote from: milkbottlec on November 29, 2013, 06:54:59 PM

http://www.ebay.co.uk/itm/620W-Antec-Neo-Eco-Modular-PSU-82-Eff-80-PLUS-Bronze-EPS-12V-Quiet-Fan-ATX-/121210213697?pt=UK_Computing_PowerSupplies_EH&hash=item1c38b11541

http://www.ebay.co.uk/itm/520W-Antec-Neo-Eco-0-761345-285209-Modular-82-Eff-80-PLUS-Bronze-SLI-Cross-/360786073970?pt=UK_Computing_PowerSupplies_EH&hash=item5400869972

Which one is good for 2-4 boards?

Or any other cheap suggestions for UK?

If your doing them on a mini plane ...niether. I'd want to look for one with at least 2X6 pin plugs built in(more if your collecting the whole set). I've got a rosewill fortress 550w 80 plus platnum for over the top HTPC build (I'm not putting a graphics card in yet but I want it too be ready for whatever).

A quick run through newegg makes me think

a fractal (since I believe its supposed to be a good brand)
http://www.newegg.com/Product/Product.aspx?Item=N82E16817580008

or

corsair (BIG Known name brand)
http://www.newegg.com/Product/Product.aspx?Item=N82E16817139059

milkbottlec

member

Activity: 95

Merit: 10

http://www.ebay.co.uk/itm/620W-Antec-Neo-Eco-Modular-PSU-82-Eff-80-PLUS-Bronze-EPS-12V-Quiet-Fan-ATX-/121210213697?pt=UK_Computing_PowerSupplies_EH&hash=item1c38b11541

http://www.ebay.co.uk/itm/520W-Antec-Neo-Eco-0-761345-285209-Modular-82-Eff-80-PLUS-Bronze-SLI-Cross-/360786073970?pt=UK_Computing_PowerSupplies_EH&hash=item5400869972

Which one is good for 2-4 boards?
For mini plane...? How many 6 pins PCIE connectors is needed?

Or any other cheap suggestions for UK?

jedimstr

hero member

Activity: 798

Merit: 1000

Quote from: Unacceptable on November 29, 2013, 06:22:37 PM

Quote from: techman05 on November 29, 2013, 06:16:55 PM

Quote from: jedimstr on November 29, 2013, 06:11:37 PM

Anyone have any luck getting the boards to work on Minepeon with the Drillbit Github Custom version of CGMiner yet? I've been getting weird errors and they refuse to do anything. Been posting on the Drillbit Forums, but wanted to know if anyone here has been successful yet on Minepeon?

Seems most of the successful screenshots I've seen here are with Windows.

Ckolivias would like you to think otherwise on [her] expectations on where the cgminer is run. I'm sure they'll be some linux users soon posting.

Uh........Ckolivias is a gal Huh

Very cool,if this is true Cheesy

Not according to Wikipedia... http://en.wikipedia.org/wiki/Con_Kolivas

Then again, I don't believe everything I read on the InterWebs SuperHighway Wink

Unacceptable

legendary

Activity: 2212

Merit: 1001

Quote from: techman05 on November 29, 2013, 06:16:55 PM

Quote from: jedimstr on November 29, 2013, 06:11:37 PM

Anyone have any luck getting the boards to work on Minepeon with the Drillbit Github Custom version of CGMiner yet? I've been getting weird errors and they refuse to do anything. Been posting on the Drillbit Forums, but wanted to know if anyone here has been successful yet on Minepeon?

Seems most of the successful screenshots I've seen here are with Windows.

Ckolivias would like you to think otherwise on [her] expectations on where the cgminer is run. I'm sure they'll be some linux users soon posting.

Uh........Ckolivias is a gal Huh

Very cool,if this is true Cheesy

techman05

hero member

Activity: 546

Merit: 500

Quote from: jedimstr on November 29, 2013, 06:11:37 PM

Anyone have any luck getting the boards to work on Minepeon with the Drillbit Github Custom version of CGMiner yet? I've been getting weird errors and they refuse to do anything. Been posting on the Drillbit Forums, but wanted to know if anyone here has been successful yet on Minepeon?

Seems most of the successful screenshots I've seen here are with Windows.

Ckolivias would like you to think otherwise on [her] expectations on where the cgminer is run. I'm sure they'll be some linux users soon posting.

techman05

hero member

Activity: 546

Merit: 500

Quote from: Its About Sharing on November 29, 2013, 06:09:14 PM

Nice work getting them out Barntech.
And wow at 20Gh for each board stock! I was planning on having to overclock to get them there. How high has anyone overclocked these?

IF we are running Raspberry Pi's (as most are) then we can plug 2 boards into each PI since the boards are individually powered?

My CoolerMaster V450S only has 3 Molex connectors though. Any ideas here?

Thx,
IAS

The one board I gots on the mini plane waiting with a molex to pci express cable and the 6 pin plug. So not an issue. I would think as long as you don't over clock you could get some grunge speeds and split a molex into 2 if you wanted.

jedimstr

hero member

Activity: 798

Merit: 1000

Anyone have any luck getting the boards to work on Minepeon with the Drillbit Github Custom version of CGMiner yet? I've been getting weird errors and they refuse to do anything. Been posting on the Drillbit Forums, but wanted to know if anyone here has been successful yet on Minepeon?

Seems most of the successful screenshots I've seen here are with Windows.

Its About Sharing

legendary

Activity: 1442

Merit: 1000

Antifragile

Nice work getting them out Barntech.
And wow at 20Gh for each board stock! I was planning on having to overclock to get them there. How high has anyone overclocked these?

IF we are running Raspberry Pi's (as most are) then we can plug 2 boards into each PI since the boards are individually powered?

My CoolerMaster V450S only has 3 Molex connectors though. Any ideas here?

Thx,
IAS

Unacceptable

legendary

Activity: 2212

Merit: 1001

Wow,these guys are smaller than I thought!!! Cheesy

Very well packed & had everything needed,USB cables(very cool ones too),plastic stands(I had some metal ones left over from my Klondike build,so didn't need em) & the tiny heatsinks Cool

After unpacking,my hand is there for a size comparison:

After heatsink installation:

The "Tower of Power" !!!! :

Runnin with the Klondike's :

Up & runnin,one went zombie after a few minutes,guess I'll be waiting for firmware updates.No biggie though,I'm patient Wink

Light show Cool

All in all I'm very happy,I know improvements will come,till then,mine it baby!!!!!!!!!!!

Thanks again Barntech & bobsag3,Fantastic job!!!!!!!!!!!!!!! Cool

kabopar

hero member

Activity: 616

Merit: 500

With added cooling, tried some overclocking

Now with fans on both sides of the 8board.

nexus99

legendary

Activity: 910

Merit: 1000

Just noticed the difficulty jumped to 707 million too.

nexus99

legendary

Activity: 910

Merit: 1000

Image of an Eight running along side 4 Chilis on my machine:

jml25

newbie

Activity: 40

Merit: 0

Just got all 4 of mine running in the plane, but one won't green light for me. Powered it separately via molex and it works fine. That fella has some separation of the outer layer of the PCB at where it connects to the plane so I'm assuming that's the issue.

Now to get the thumb running

techman05

hero member

Activity: 546

Merit: 500

I tried it both ways with no green lights for my second board. I did just for kicks take the first one out and see if it was a port issue (maybe that something was fudged elsewhere) with no luck.

The only thing I know about it is that when I did try to plug them both in power was passing through the non working board to the other board on the mini plane, so one of the resisters is not keeping power where it should. It reminds me of when I had a cheap chinese hub and it was sending power back to a raspberry pi I was testing it on. The rosewell ones I have don't but apparently they have set of ports in them and windows hates that more then reverse power.

I can't buy into batch 3 till I sort out whats going on with my current batch device.

ryanb

legendary

Activity: 1148

Merit: 1000

i tried each one separately without the mini plane i connected each board to a usb and a molex only one has a green light coming on

the other 3 looks dead

kabopar

hero member

Activity: 616

Merit: 500

Quote from: ryanb on November 29, 2013, 03:49:06 PM

now i only have one running the other 3 boards no light green coming on
at first they started hashing then each board shows on cgminer zombie and the green light on the eight goes off

i am using the miniplane and i tried molex
i have 650 watt psu

anyone can help me get the other boards running please?

Don't use the miniplane for now. See Swimmer63's post before your one (each board connected separately to power and USB)

kabopar

hero member

Activity: 616

Merit: 500

Quote from: ryanb on November 29, 2013, 12:24:36 PM

hey guys
i received my kit now

i am having issues only one are running but i see all 4 boards on my device manager

it seems like usb 3 is not supported?

looks like you need to connect each board separately to USB2, without the mini-plane that still has a firmware fix on the way.

I run a single board, so did not have this issue.

thegoldbug

member

Activity: 90

Merit: 10

I sprung my 5 USB drillbits from the Postal prison there were in (I had to wait for then to open up and sign the receipt).

4 out of the 5 are hashing away nicely (at 250:1:950) but one is clearly under performing. After 1hr 25 minutes they showed 2.911/2.80/2.824/1.972/2.924

I moved the bad one around from my computer port to a hub, played with some lower settings (200, 230) and it was still under performing the other 4 drillbits.

I restored the setttings back to (250:1:950) and restarted. It's been another 1hr and 20 minutes and the report 2.83/2.89/2.81/2.02/2.88

The laggard has 2575 accepted and 779 HW errors. Thats an error rate of around 30%.

I'm wondering if there is some bridging occurring like on the BlueFluries.

Thoughts?

thegoldbug

Topic: DRILLBIT SYSTEM Miners - Avalon range available - Now $104.99! - page 36. (Read 273820 times)