Well I sort of hopped someone got one of those huge asic usb plugs and disconnect as long as the errors are within your range limits.
I just figured you could get 300 people to send one pool and as your working cgminer will jump in and out of pools so we'd each get a fubar of shares for a short time. They don't have to be in any order. Its like a thanks giving gift ;P.
At least then you have everyone qued in your messages to send out shipping tags as well.
Topic: DRILLBIT SYSTEM Miners - Avalon range available - Now $104.99! - page 54. (Read 273883 times)
November 19, 2013, 03:51:14 PM
November 19, 2013, 03:40:41 PM
Mine with their addresses?
I think that would be WAY too time consuming...
that would be way to consuming. Just the 45min/ board would be a strain on my capabilities without killing shipment time. November 19, 2013, 03:26:07 PM
Mine with their addresses?
I think that would be WAY too time consuming...
November 19, 2013, 03:24:56 PM
I cant answer on the software but I can on the shipping. Looks like the boards should be done here within 48 hours, and then will be dispatched after a small amount of testing to AUS, and me in the US. At least from me, all boards will then be tested again (Not sure how long... suggestions?) and then immediatly shipped out same day via UPS Next Day/2nd Day air [depending on location]. As soon as we know the boards are done, we can give concrete delivery.
I'd sample test say 1/10th of the boards for a few hours on testnet. That'd be my recommendation
That is pretty dangerous (I think). I'm pretty sure all boards need to be tested, the question is for how long. I'm not sure of the failure rate and the test time in general. Perhaps it depends a bit on when the boards arrive. Having them run overnight is not a bad idea. Just my thinking but perhaps some people with experience can help you out. I imagine Barntech and company are the experts here.
IAS
Mine with their addresses?
November 19, 2013, 03:21:49 PM
I cant answer on the software but I can on the shipping. Looks like the boards should be done here within 48 hours, and then will be dispatched after a small amount of testing to AUS, and me in the US. At least from me, all boards will then be tested again (Not sure how long... suggestions?) and then immediatly shipped out same day via UPS Next Day/2nd Day air [depending on location]. As soon as we know the boards are done, we can give concrete delivery.
I'd sample test say 1/10th of the boards for a few hours on testnet. That'd be my recommendation
That is pretty dangerous (I think). I'm pretty sure all boards need to be tested, the question is for how long. I'm not sure of the failure rate and the test time in general. Perhaps it depends a bit on when the boards arrive. Having them run overnight is not a bad idea. Just my thinking but perhaps some people with experience can help you out. I imagine Barntech and company are the experts here.
IAS
November 19, 2013, 03:03:08 PM
I cant answer on the software but I can on the shipping. Looks like the boards should be done here within 48 hours, and then will be dispatched after a small amount of testing to AUS, and me in the US. At least from me, all boards will then be tested again (Not sure how long... suggestions?) and then immediatly shipped out same day via UPS Next Day/2nd Day air [depending on location]. As soon as we know the boards are done, we can give concrete delivery.
I'd sample test say 1/10th of the boards for a few hours on testnet. That'd be my recommendation
That is pretty dangerous (I think). I'm pretty sure all boards need to be tested, the question is for how long. I'm not sure of the failure rate and the test time in general. Perhaps it depends a bit on when the boards arrive. Having them run overnight is not a bad idea. Just my thinking but perhaps some people with experience can help you out. I imagine Barntech and company are the experts here.
IAS
November 19, 2013, 02:38:34 PM
I cant answer on the software but I can on the shipping. Looks like the boards should be done here within 48 hours, and then will be dispatched after a small amount of testing to AUS, and me in the US. At least from me, all boards will then be tested again (Not sure how long... suggestions?) and then immediatly shipped out same day via UPS Next Day/2nd Day air [depending on location]. As soon as we know the boards are done, we can give concrete delivery.
I would have thought 15 minutes each, but you can take as long as you need if you want to get plastered by config files and you set cgminer to rotate every x minutes. I have a few pools I want to clean out of and I need a minimum of .01 to gut it.
November 19, 2013, 01:53:32 PM
I cant answer on the software but I can on the shipping. Looks like the boards should be done here within 48 hours, and then will be dispatched after a small amount of testing to AUS, and me in the US. At least from me, all boards will then be tested again (Not sure how long... suggestions?) and then immediatly shipped out same day via UPS Next Day/2nd Day air [depending on location]. As soon as we know the boards are done, we can give concrete delivery.
I'd sample test say 1/10th of the boards for a few hours on testnet. That'd be my recommendation
Yeah I can do that. *might* be able to live stream, or atleast upload a ton of pictures.
I will be shipping from MO. Middle of the country, and if your anywhere close to me Im ok with local pickup
. And I just want to say guys - Barn has been working very hard behind the screens to bring this all together... this stuff is immensely complex.
Good to go, thanks! (East Coast here) Looking forward to delivery!
November 19, 2013, 01:41:24 PM
I cant answer on the software but I can on the shipping. Looks like the boards should be done here within 48 hours, and then will be dispatched after a small amount of testing to AUS, and me in the US. At least from me, all boards will then be tested again (Not sure how long... suggestions?) and then immediatly shipped out same day via UPS Next Day/2nd Day air [depending on location]. As soon as we know the boards are done, we can give concrete delivery.
I'd sample test say 1/10th of the boards for a few hours on testnet. That'd be my recommendation
Yeah I can do that. *might* be able to live stream, or atleast upload a ton of pictures.
I will be shipping from MO. Middle of the country, and if your anywhere close to me Im ok with local pickup
. And I just want to say guys - Barn has been working very hard behind the screens to bring this all together... this stuff is immensely complex.
November 19, 2013, 01:30:52 PM
Good news this time! Today i shipped out the first thumbs. 
The rest will be shipped tomorrow. I'll send out tracking numbers as soon as i have them.
It feels damn good to get these things out there! They work. They work well. Some are hashing comfortably above 3 GH/s !
Thank you all for your patience (those that HAVE been patient
) Feels pretty great to get to this milestone.
On other good news, our new parts are with the factory and the other boards should be done tomorrow. I might even get some sleep one day soon. 
And now.... Thumb porn!
Ready for launch! Enjoy.
The rest will be shipped tomorrow. I'll send out tracking numbers as soon as i have them.It feels damn good to get these things out there! They work. They work well. Some are hashing comfortably above 3 GH/s !
Thank you all for your patience (those that HAVE been patient
) Feels pretty great to get to this milestone.On other good news, our new parts are with the factory and the other boards should be done tomorrow.
I might even get some sleep one day soon. And now.... Thumb porn!
Ready for launch! Enjoy.
Congrats Barn', it seems this is home strech before mining with this!
So you confirm all the fab (8-chips boards) would be done this week? Can you state whether you ship everything from China directly to us or via AUS (except for US)? If direct from China, are theses boards tested before shipping?
Then about software, can you give details how to handle (make run) Drillbit? According to me there's not yet support from CGMiner nor BFGMiner. For now, we only know that CGminer modified was used during development.
Have you sent also some tips (software, config, tools,..) with the first Drillbit thumb?
I cant answer on the software but I can on the shipping. Looks like the boards should be done here within 48 hours, and then will be dispatched after a small amount of testing to AUS, and me in the US. At least from me, all boards will then be tested again (Not sure how long... suggestions?) and then immediatly shipped out same day via UPS Next Day/2nd Day air [depending on location]. As soon as we know the boards are done, we can give concrete delivery.
Bob - what State are you shipping from, just curious..
Thanks
November 19, 2013, 01:27:33 PM
I cant answer on the software but I can on the shipping. Looks like the boards should be done here within 48 hours, and then will be dispatched after a small amount of testing to AUS, and me in the US. At least from me, all boards will then be tested again (Not sure how long... suggestions?) and then immediatly shipped out same day via UPS Next Day/2nd Day air [depending on location]. As soon as we know the boards are done, we can give concrete delivery.
I'd sample test say 1/10th of the boards for a few hours on testnet. That'd be my recommendation
November 19, 2013, 01:25:14 PM
Good news this time! Today i shipped out the first thumbs. The rest will be shipped tomorrow. I'll send out tracking numbers as soon as i have them.
It feels damn good to get these things out there! They work. They work well. Some are hashing comfortably above 3 GH/s !
Thank you all for your patience (those that HAVE been patient ) Feels pretty great to get to this milestone.
On other good news, our new parts are with the factory and the other boards should be done tomorrow. I might even get some sleep one day soon.
And now.... Thumb porn!
Ready for launch! Enjoy.
The rest will be shipped tomorrow. I'll send out tracking numbers as soon as i have them.It feels damn good to get these things out there! They work. They work well. Some are hashing comfortably above 3 GH/s !
Thank you all for your patience (those that HAVE been patient
) Feels pretty great to get to this milestone.On other good news, our new parts are with the factory and the other boards should be done tomorrow.
I might even get some sleep one day soon. And now.... Thumb porn!
Ready for launch! Enjoy.
Congrats Barn', it seems this is home strech before mining with this!
So you confirm all the fab (8-chips boards) would be done this week? Can you state whether you ship everything from China directly to us or via AUS (except for US)? If direct from China, are theses boards tested before shipping?
Then about software, can you give details how to handle (make run) Drillbit? According to me there's not yet support from CGMiner nor BFGMiner. For now, we only know that CGminer modified was used during development.
Have you sent also some tips (software, config, tools,..) with the first Drillbit thumb?
I cant answer on the software but I can on the shipping. Looks like the boards should be done here within 48 hours, and then will be dispatched after a small amount of testing to AUS, and me in the US. At least from me, all boards will then be tested again (Not sure how long... suggestions?) and then immediatly shipped out same day via UPS Next Day/2nd Day air [depending on location]. As soon as we know the boards are done, we can give concrete delivery.
November 19, 2013, 01:25:04 PM
I'm curious about CGMiner on Minepeon also, would love to get the image burned once you have the information.
Second this, would be great to see beagle bone and rPi images for Minepeon/Mineninja that work out of the box on the boards/thumbs
Thanks!
November 19, 2013, 01:24:45 PM
Congrats on shipping those bad boys out!!!
Don't forget about the Drillbit forum guys, we can dig into specifics for the thumbs, boards, configs, cooling, etc. over there: http://www.drillbitsystem.com/forum/
Don't forget about the Drillbit forum guys, we can dig into specifics for the thumbs, boards, configs, cooling, etc. over there: http://www.drillbitsystem.com/forum/
November 19, 2013, 01:18:20 PM
Another Congrats Barntech. Are you guys gonna party or what when you get those bad boys running and out the door?
BTW - Remember what I told you on October 15th and earlier regarding China?
What is happening in China is probably not what many think. The government gave the silent OK to BTC, and on a few occasions. You are seeing huge amounts of money flowing into BTC there and it is pulling our markets along. The scary part imo, it is just getting started.
I'm curious about CGMiner on Minepeon also, would love to get the image burned once you have the information.
Great job, looking forward to mining.
Enjoy the volatile ride guys. I really DON'T suggest trading this. The market can run to $1000-$1500 imo (by looking at the charts).
And if you like priced projections (looking at the past run ups) then the number is around $3000. But, it will be Über volatile.
Just relax and enjoy the show, it is history in the making. Speaking of, the Senate Hearings yesterday were a thing of Beauty for BTC.
If you missed them - http://www.banking.senate.gov/public/index.cfm?FuseAction=Hearings.Hearing&Hearing_ID=955322cc-d648-4a00-a41f-c23be8ff4cad
(At least watch the BTC guys speak, the interesting thing about the Governments perspective is that they were for BTC essentially, not ever against it.)
Its about Sharing
BTW - Remember what I told you on October 15th and earlier regarding China?
What is happening in China is probably not what many think. The government gave the silent OK to BTC, and on a few occasions. You are seeing huge amounts of money flowing into BTC there and it is pulling our markets along. The scary part imo, it is just getting started.
I'm curious about CGMiner on Minepeon also, would love to get the image burned once you have the information.
Great job, looking forward to mining.
Enjoy the volatile ride guys. I really DON'T suggest trading this. The market can run to $1000-$1500 imo (by looking at the charts).
And if you like priced projections (looking at the past run ups) then the number is around $3000. But, it will be Über volatile.
Just relax and enjoy the show, it is history in the making. Speaking of, the Senate Hearings yesterday were a thing of Beauty for BTC.
If you missed them - http://www.banking.senate.gov/public/index.cfm?FuseAction=Hearings.Hearing&Hearing_ID=955322cc-d648-4a00-a41f-c23be8ff4cad
(At least watch the BTC guys speak, the interesting thing about the Governments perspective is that they were for BTC essentially, not ever against it.)
Its about Sharing
November 19, 2013, 12:11:13 PM
Good news this time! Today i shipped out the first thumbs. The rest will be shipped tomorrow. I'll send out tracking numbers as soon as i have them.
It feels damn good to get these things out there! They work. They work well. Some are hashing comfortably above 3 GH/s !
Thank you all for your patience (those that HAVE been patient ) Feels pretty great to get to this milestone.
On other good news, our new parts are with the factory and the other boards should be done tomorrow. I might even get some sleep one day soon.
And now.... Thumb porn!
Ready for launch! Enjoy.
The rest will be shipped tomorrow. I'll send out tracking numbers as soon as i have them.It feels damn good to get these things out there! They work. They work well. Some are hashing comfortably above 3 GH/s !
Thank you all for your patience (those that HAVE been patient
) Feels pretty great to get to this milestone.On other good news, our new parts are with the factory and the other boards should be done tomorrow.
I might even get some sleep one day soon. And now.... Thumb porn!
Ready for launch! Enjoy.
Congrats Barn', it seems this is home strech before mining with this!
So you confirm all the fab (8-chips boards) would be done this week? Can you state whether you ship everything from China directly to us or via AUS (except for US)? If direct from China, are theses boards tested before shipping?
Then about software, can you give details how to handle (make run) Drillbit? According to me there's not yet support from CGMiner nor BFGMiner. For now, we only know that CGminer modified was used during development.
Have you sent also some tips (software, config, tools,..) with the first Drillbit thumb?
November 19, 2013, 11:13:07 AM
Hey guys.
Good news this time! Today i shipped out the first thumbs.
Good news this time! Today i shipped out the first thumbs.
Sweet! Thanks again Barntech!
November 19, 2013, 10:41:43 AM
Its an army of chips. I'll be so happy to get rid of a few of my eroupters or at least have a good kick while bitcoins are as high as they are.
November 19, 2013, 10:11:14 AM
Sweet !!! best get my ass in gear and get a PSU sorted now.
great news barn im sure this is a big weight off your shoulders. now on to the boards !!
great news barn im sure this is a big weight off your shoulders. now on to the boards !!
November 19, 2013, 09:03:33 AM
WOW nice thumb!!
No EU resselers?
No EU resselers?
Jump to: