Topic: Ebang Announces E9++, E10, and E10.1 (Read 14721 times)

https://asicpromarket.com/

hi my dear excuze me i just want frimware old for miner E9.3 and E10.3
please i waiting for you

E9.3 :
 9.0.0.20
9.0.0.21
9.0.0.22

E10.3:

10.0.1.10

please send me link download here or on the my account telegram

https://t.me/space_2000

my number for whatsapp and telegram
989038008459
989390938507

please i just need this version for two device

who wanted frimware vrsion old for any miner?
please come on here inside telegram for recevied

my page telegram:  https://t.me/space_2000

Please submited firwmware ebit e10.3 version 10.0.1.2 link download archive!

first update to E10.1 Firmware version number: Firmware –V9.1.5.8.tar
then
update to E10.1 Firmware version number: Firmware –V9.2.5.9.tar
& Sad

I turn on the device and the green light stays on and can't get the IP
I also tried the ip button but it didn't work and the lamp is still fixed
Fans also rotate at speed but do not connect to the network
please help

Good luck finding someone using it.
Most folks now avoid all Ebang miners like the Plague because they are crap and support from Ebang is non-existent.
Start here in this thread and also here in this thread to get other folks opinions about Ebang and their miners...

Hi  guys,  do you have  the REAL wattage consumption  for  E10.1 (18TH)  with the last firmware ?

http://miner.ebang.com.cn/upload/miner/cms/btc_upgrade_9.2.5.9.tar.gz


Someone has tested  it ?  if  pics or video with wattage meter could be posted would be better !

Thanks!

how u upgrade ur machine  its very unusual i cant find any guide for upgrade in google is their any guide for it.

On the website now is no more E10, but now they have E9.3 (16t) and E9.2(12t) both say they are their (sudo)10nm dw1228 (same used in E10.1) chip and gives 110w/th

They're all over the board with this stuff. What happened to the E10?? The E9++??? Support shows 9.2 firmware, but no 9.3 firmware. 9.3 is listed at $950 and 9.2 is listed at $1150. WHy would you price the higher th unit less??? Does 9.3 even exist?

I just don't really trust them. The power has always been more than advertised and the e10 looks like nowhere near the 90w/th they said. the e9+ consumers more than advertised although not terribly out of range. Support is non-existent, just look at their very first product the E9, those people who bought those totally got screwed, they basically never even supported them even when they were only weeks old.

Why are they making so many different products??? They could barely support it when they had 1 or 2 and I'm just talking firmware updates, hardware support never really seems to have existed. Now they have what...

• e9      -- basically while still less than a year old, they say too old no support not even if you want to buy parts
• e9+    -- seems to have been their most stable product although not without issues... lots of reports of bad boards and near zero support, I've not heard of one story where someone sent their broke machine in under warranty and it was actually fixed
• e9++  -- not sure if these ever existed but they were for sale for a while, I guess
• e10   -- advertised but I think never existed, I think just renamed e10.1
• e10.1  -- power seems to have been way off, based on website news they either didn't deliver alot of them or something went wrong with alot of them, they are offering some rebate to people but it's unclear what it's for
• e10.2  -- never seems to have existed, but was shown in chiense version of website for sale for a while
• e9.3  -- http://miner.ebang.com.cn/goods-9.html
• e9.2  -- http://miner.ebang.com.cn/goods-5.html

What the heck. Are 9.3 and 9.2 just attempts to use their underperforming dw1228 chips they were putting in the e10??

These products once you have them...if you can get them...if you want them... is they are what they are. If they work, great, if not, your SOL.  I've got 3 e9+ , 2 I bought from them directly though a very convoluted process mostly based on prayers and hope....but I did get them and those 2 work perfect since last fall since I got them aside from the 130w/th, another I got off ebay and it worked for a few weeks and 2 boards of the 3 went belly up...but I think whoever had this machine beat the crap out of it, it looked like it mined in an actual dirt mining pit it was so dirty and caked up.

I had high hopes they would have some integrity behind thier company, especially since they seem to have existed making other electronic communication hardware prior to going into the mining business. But...that hope has all been lost.

Hi All,

Today I experimented with different PLL settings on E10, measuring power consumption along the way. My power meter isn't fancy - just a cheap device bought on Ebay. Though, based on my experience in the past, I find it to be quite precise for my use.

So, the device is Ebit E10:
Systems software version: v8.0.0.38
Hardware version: EBAZ5506-02-QB_v1.0
FPGA software version: Fpga v1.0.2

The E10 is set up to work on Kano Pool. The only thing I changed is the PLL. I waited for at least 20 minutes after each PLL change, so that the miner would speed up and reach the expected performance.

The results are:



Notes:
I was unable to set PLL = 700. The value returned back to 680 after a reboot. I didn't try any values above that.
I didn't try any PLL values below 450 (is there a point to check these?!).
PLL = 601 is how it was reported in the Miner UI when I set it to 600. Looks like a rounding issue somewhere in the software.
PLL 500 seems to be LESS efficient than PLL 550 and 600. This is not a measurement error - I rechecked that several times, and always got about the same result.

Hope this helps...

P.S. I also tried the "Systems software version v8.0.0.58", but it doesn't let me set PLL to 680 (looks like 660 is its maximum). Therefore, I made all the tests with v8.0.0.38 and that's the version I'm running on my production machines.

---

Yesterday Ebit published an upgrade for E10 containing BOOT5506_0B.bin and top_ctrl16_0B.bit files.


The upgrade procedure involves Ebit's MinerMini utility to upload the new firmware. It also insists to have SW v8.0.0.45 installed prior to the upgrade (included in the package).

I successfully did the upgrade, but didn't notice any significant changes. The only visual change is the hardware version field changed from EBAZ5506-02-QB_v1.0 to EBAZ5506-0b-QB_v1.0.

I stayed with the SW v8.0.0.45 after the upgrade. This version allows PLL to be set up to 680 (inclusive), and seem to work fine so far.

I heard they were selling them in Feb almost twice cheaper than $5800. May be now they can sell it for 15 hundreds lol

Regarding consumption - I'm sorry, let me be more specific
I didn't have opportunity to measure it using some special equipment, but I had power strip designed for max load 2kWt - it was good with 1.8kWt and 1.6kWt loads previously, and it didn't withstand this unit (powered off after ~30min)
So I concluded it's a little bit more that 2kWt (but definitely more than 1.8kWt)


update: 680pll, 19Th, consumption between 2.1 and 2.15kW

So they lied about the power specs?? Are they refunding for the difference vs what was promised?? What makes these worth $5500 for 18th/s vs antminer s9 that is 14th/s at $1400 (less with coupons)?? Idk how they managed to make a 10nm miner (i think thats what i read if not sorry) but uses A LOT more power than a miner that is over a year old and counting. Not only that they set the price super high for some odd reason...seems like they got too greedy.

Wow, so the power consumption is much more than was originally advertised.

I guess we know now why Ebang doesn't want to show the power consumption number at the website anymore. 

what do you need to hear guys as feedback?
about e10.1
1. the software is as crappy as previous e9+. still no root from manufacturer (but it can be hacked)
2. hashrate is as described, power cunsumption is like 2.2-2.4kWt
3. psu is integrated, it works
4. main board is connected directly in the blades - so no more wires except fan wires

but overall - it works

upd - didn't measure power using some special stuff. please check msg below with more info

As far as I know, Ebang has already started shipping the March batch of E10. Probably not all the miners are shipped (yet), but I already see offers from Chinese resellers to ship E10 within 1-3 business days. I didn't see any end-user feedback yet, though.

That's right. Ebang's customer service suck so hard, I can retire my vacuum cleaner.

Wouldn't buy anything from EBang in my life again.

I've seen absolutely no news about the E10 yet, but from what I can tell from their website the first few E10s will come out at the end of this month.

Miner reliability and customer support is something else you missed with the cons of the Ebit miners. This post and the quote within it should be enough to keep you well away from Ebang as a whole. Pricing on these things is a joke, and you're much better off even just getting an S9.

https://bitcointalksearch.org/topic/m.32223485

Is there any real user's feedback ?    Ebang’s Ebit miners are mostly popular in Asian countries, though they are trying to get to a wider market and their latest announcement of a 10 nm ASIC miner – the E10 made some waves.  It is however an expensive device and still hard to get with a minimum purchase quantity of 20 units and all batches already sold through the end of March.

Let me back up a little here. I have the ability to run 20 miners but I dont have 20 miners. I add one or two here and there. As things like noise and heat become an issue. They will be addressed. I have a room in my basement for them. It stays cooler down there all year long and the heat can be evacuated through the window. This is all temporary since I have a 3600Sq/f building being built on the other side of my property. It has its own 200 amp service and 16 foot ceilings to get heat up and out. I just dont want to wait for it to be done to start mining. That's why I threw that sub panel in the basement. I may never have 20 miners down there but it will be easy for me to unscrew it from the wall and move it all out to the building once its done. 

Yes 200 amp service at my house. 20 miners at 1600w is maxed out for me. All my appliances run on gas so all I need electricity for is lights and my fridge and freezer.

---

Moderator's note: This post was edited by frodocooper to remove nested quotes.