Topic: Efudd Z-Series Fuddware 2.3 -Z11/Z11e/Z11j/Z9/Mini - page 22. (Read 45536 times)

Hello, just trying to update to latest fw version

Keep getting "tar short read"

I unzipped the file as per the instructions, and then tried to upload the .tar and it fails.

I've tried winzip, winrar, 7zip, no dice.

No matter how i unzip the "UNZIP ME" file, it just fails?

Any ideas?

Thank you

Folk,

This will be a "Dev-fee" free weekend, with the dev-fee being disabled until Monday January 6th, 2019.

This will require 2.1(d) to be installed -- 2.1(c) expired due to a mistake I made -- I still have approximately 20 systems running it that need to upgrade. Please check to make sure you are not one of them.

Thank you,

Jason

Folk,

For the month of January, I will be giving away a Nintendo Switch to firmware users. The rules will be the same as December, with 1 entry per day per system. This is for users of 2.1(d) or higher.

Thank you,

Jason

Howdy folk,

A friendly reminder that the reason the dev-fee is set up so it mines for you for 10 minutes first is so you can tune, not so you can restart your miner every 10 minutes and avoid a dev-fee.

So if what I've said matches you in the last 24 hours, you might want to find another firmware.

Jason

Thanks you for the information. I do see the dash is much closer. I am looking to play around is all and am not out to step on your projects. I am too burnt out on coding and I don't want to spend a whole lot of time on something large anymore. 40+ years total of coding. I started at age 11 on a TI-99 and a pack of cassette tapes.

Although I am working on some designs for a home power station to reduce a miners power cost to $0 or very close to $0. It would cost 2-3k to built the basic unit which will put out 10-15kw then cost would be higher depending on how much power you actually need. Once the plans are completed I will release them on a donation basis.

That was bitmain. Again, the -DASH variant is closer to the Z series units in terms of implementation: https://github.com/bitmaintech/cgminer-dash

Heck, you could probably make it run on the Z series units if you mapped out every hardware address and made some updates to a couple of large functions. Not impossible... I spent a little time on that in fact, but decided to spend the time elsewhere.

-j

I came across it on GitHub it is for the S7. Here is the link. https://github.com/bitmaintech

I don't know if it is bitmain themselves or someone using the name but there are quite a few source files for different miners. If that is the case eventually the z9 one should be released.

Post it to github for the rest of the class.

I'd be surprised if you have anything different than what they've already posted up in various obscure places.

The closest is the "DASH" variant for what it is worth.

-j

Jason

 All disagreements aside I would like to know if you want a copy of the Bitmain source code for cgminer 4.9.2 it looks like it was for bitcoin but at least it is a good start of the source code and may help you in your coding. If you do let me know and I will get it uploaded and send you the link.

MinerX.312 - Thank you for updating the thread here and I'm glad the PS4 made it safely to you.

With some luck, I'll be able to run another contest for January and it looks like it may be a Nintendo Switch this time around.

Thank you,

Jason

AKA MinerX.312 on twitter and discord....my prize came today. Thanks @efudd for providing  a great product (z9 no dev fee license x2) and coming through with the Ps4 prize...got it today!

https://cdn.discordapp.com/attachments/477071772123136020/528676544550404096/Efudd_Ps4.jpg

Thank you -- that seems to be the consensus from discord as well.

Jason

I vote for a Nintendo Switch.

Accepting ideas for the January giveaway.

Xbox One X?
Nintendo Switch?
PS4 again?

Something else?

Practically the suggestions should be under $400 USD please (honestly, dev fees do not pay that much, lol).

Thank you,

Jason

Folk,

Following the same logic used for the 1 ZEC contest the beginning of this month, the winner of the PS4/Spiderman bundle has been selected and contacted.

There were a total of 7,013 entries, 6 of which were from forum users on the giveaway thread, the rest were from firmware users.

I'll make the breakdown of entries per day available if requested, but I figured 24 lines of data would not really be helpful.

For each user who posted in the giveaway thread, 1 entry was added.
For each system that was running firmware, paid or free, 1 entry was added per day.

This file was randomly shuffled.

To select a real random number, I requested a number between 1 and 10000 from my wife and 2 users on the equihash discord service.

The numbers selected were: 25, 8731, and 1369.

These were totaled and divided by 2, dropping any decimal to determine the winning entry in the data file (25+8731+1369)/2 = 5062.5 or 5062 after dropping the decimal.

This resulted in a winning support ID of c0492572-fbf5-11e8-8c83-XXXXXXXX (last part has been obscured).

The winner happens to be a user on the Equihash discord chat (see my signature for a link to the discord) by the name of MinerX.312 - congrats!

I will begin another contest at the beginning of the year and I thank everyone for the participation.

Jason

I have 6 x Z9 minis batch 1 and no Z9 so i cant test one and maybe a voltage increase is need on the mini Z9

thx
Steve

PS4 Contest is officially over. I have taken the snapshot of usage over the last 24 days and have begun processing it to select the winner. I hope to have the results completed by end of day Christmas (family and stuff takes priority).

Thank you,

Jason

From the first post:

If your browser automatically uncompresses archives, you will get a 'tar: short file read' error on upload. Please disable automatic uncompress in your browser. You should be uploading a ".tar.gz" file to your miner, not a ".tar" when flashing the firmware image.

Jason

Howdy folk,

Merry Christmas Eve here in GMT-5. A friendly reminder that the PS4/Spiderman bundle giveaway contest AND Z9Mini/Z9 Firmware sells end at 23:59:59 12/24/18 (approximately 18 hours from the time of this post).

Thank you all for your support, and good luck in the contest!

Jason

Thank you for your feedback.

Jason