Efudd Z-Series Fuddware 2.3 -Z11/Z11e/Z11j/Z9/Mini - page 32.

efudd

member

Activity: 504

Merit: 51

Quote from: chipless on November 21, 2018, 12:27:53 PM

Quote from: efudd on November 21, 2018, 11:50:43 AM

Sigh. Chipless Posting that firmware in this thread is seriously uncool and I’m just going to call that out. It was a huge douche maneuver.

Antonio, your problems are your network. I worked with you via teamviewer until 4am my time and something at your ISP is blocking network communications. I would appreciate everyone being very clear here so there is not confusion about what is going on.

I request y’all take that conversation to your own thread.

Jason

I don't see why there is a problem with releasing it on your thread all batches of the mini are capable of running batch 1 firmware I just resolved a problem with the temp and fans not working correctly any other improvements you can do but for now it is no different then linking the batch firmware as far as I see it but I started a thread for it found here. Sorry if it offended you but in some cases we all need to work together. I realize you have time into your firmware as do I my fix is far from what you are doing and in no way interferes.

https://bitcointalk.org/index.php?topic=5073285.new#new

This is my last response to you: You PMed me yesterday asking to test the firmware while simultaneously asking me to take the dev mode out for you. If you cannot see how these two things add up together to be very questionable, then I do not know what to say.

Jason

jewbsv

newbie

Activity: 21

Merit: 0

Quote from: Antonio2018 on November 21, 2018, 12:01:28 PM

Quote from: efudd on November 21, 2018, 11:50:43 AM

Sigh. Chipless Posting that firmware in this thread is seriously uncool and I’m just going to call that out. It was a huge douche maneuver.

Antonio, your problems are your network. I worked with you via teamviewer until 4am my time and something at your ISP is blocking network communications. I would appreciate everyone being very clear here so there is not confusion about what is going on.

I request y’all take that conversation to your own thread.

Jason

Blocking takes place on the whole territory of Russia, and not only this provider, I do not know why. I tried to use other providers - the result is the same. Maybe it makes sense to introduce into the firmware the ability to work via VPN? Use vpn - connect without problems.

What resource are we talking about?

chipless

jr. member

Activity: 559

Merit: 4

Quote from: efudd on November 21, 2018, 11:50:43 AM

Sigh. Chipless Posting that firmware in this thread is seriously uncool and I’m just going to call that out. It was a huge douche maneuver.

Antonio, your problems are your network. I worked with you via teamviewer until 4am my time and something at your ISP is blocking network communications. I would appreciate everyone being very clear here so there is not confusion about what is going on.

I request y’all take that conversation to your own thread.

Jason

I don't see why there is a problem with releasing it on your thread all batches of the mini are capable of running batch 1 firmware I just resolved a problem with the temp and fans not working correctly any other improvements you can do but for now it is no different then linking the batch firmware as far as I see it but I started a thread for it found here. Sorry if it offended you but in some cases we all need to work together. I realize you have time into your firmware as do I my fix is far from what you are doing and in no way interferes.

https://bitcointalk.org/index.php?topic=5073285.new#new

efudd

member

Activity: 504

Merit: 51

Quote from: Antonio2018 on November 21, 2018, 12:01:28 PM

Quote from: efudd on November 21, 2018, 11:50:43 AM

Sigh. Chipless Posting that firmware in this thread is seriously uncool and I’m just going to call that out. It was a huge douche maneuver.

Antonio, your problems are your network. I worked with you via teamviewer until 4am my time and something at your ISP is blocking network communications. I would appreciate everyone being very clear here so there is not confusion about what is going on.

I request y’all take that conversation to your own thread.

Jason

Blocking takes place on the whole territory of Russia, and not only this provider, I do not know why. I tried to use other providers - the result is the same. Maybe it makes sense to introduce into the firmware the ability to work via VPN? Use vpn - connect without problems.

Yeah, sorry. I'll regionalize later if necessary. It's weird that your provider lets you access releases.broked.net but not the other API server.

Jason

efudd

member

Activity: 504

Merit: 51

Quote from: jewbsv on November 21, 2018, 12:15:06 PM

efudd PM.

Thank you -- I am holding off on additional testers for the next 48 hours.

Jason

jewbsv

newbie

Activity: 21

Merit: 0

efudd PM.

Antonio2018

newbie

Activity: 8

Merit: 0

Quote from: efudd on November 21, 2018, 11:50:43 AM

Sigh. Chipless Posting that firmware in this thread is seriously uncool and I’m just going to call that out. It was a huge douche maneuver.

Antonio, your problems are your network. I worked with you via teamviewer until 4am my time and something at your ISP is blocking network communications. I would appreciate everyone being very clear here so there is not confusion about what is going on.

I request y’all take that conversation to your own thread.

Jason

Blocking takes place on the whole territory of Russia, and not only this provider, I do not know why. I tried to use other providers - the result is the same. Maybe it makes sense to introduce into the firmware the ability to work via VPN? Use vpn - connect without problems.

efudd

member

Activity: 504

Merit: 51

Sigh. Chipless Posting that firmware in this thread is seriously uncool and I’m just going to call that out. It was a huge douche maneuver.

Antonio, your problems are your network. I worked with you via teamviewer until 4am my time and something at your ISP is blocking network communications. I would appreciate everyone being very clear here so there is not confusion about what is going on.

I request y’all take that conversation to your own thread.

Jason

efudd

member

Activity: 504

Merit: 51

Folk,

Due to the thanksgiving holiday and family things, I am going to let this run with the couple of beta testers instead of expanding the audience. I need to make sure things are working (one user had issues, but appears to be network related) and be available to fix them. I'll look to get feedback from the beta testers and hopefully open the floodgates on Friday.

Thank you,

Jason

efudd

member

Activity: 504

Merit: 51

Quote from: chipless on November 21, 2018, 09:56:15 AM

....snip...

Sigh. I kindly ask you find your own thread for this and it is seriously uncool to post that here after I've been working for weeks to prep an infrastructure to release additional functionality. I am a straight shooter and I do not appreciate your action at all.

Jason

chipless

jr. member

Activity: 559

Merit: 4

Quote from: keksik on November 21, 2018, 05:20:25 AM

Quote from: chipless on November 19, 2018, 11:25:59 PM

Quote from: keksik on November 19, 2018, 04:47:01 PM

i have first batch z9mini hashing 750Mhz stable for months. may i ask what benefits have your firmware about bitmains from batch 1?

thanks

my batch 1 minis run best at 762mhz batch 4 at 737

i can choose only 750Mhz max, i do not have more options. How did you managed to choose 762?

thanks

same steps as the batch 2 mini overclock directions online.

I have working batch 4 firmware for the z9 mini unlocked with working temp and fan.

I am not asking for dev fee and only ask for donations if you find it helpful for your Batch 4 Z9 mini. This is a one time fix no further updates for this firmware Efudd has the furture updates covered with his projects.

I am only releasing this because the fan noise on the batch 4's suck.

Donations Zcash only can be sent to: t1e4Dmr5RBgnWqTN2mAmZ6JzGavW7qxA4P1

THIS IS FOR Z9 Mini's ONLY WILL WORK ON ALL BATCHES 1-4

https://drive.google.com/file/d/1fSrEopPWO5nChvphh7zvIT_3zj4DI4t5/view?usp=sharing

Marchcat2008

newbie

Activity: 17

Merit: 0

Quote from: keksik on November 21, 2018, 05:20:25 AM

Quote from: chipless on November 19, 2018, 11:25:59 PM

Quote from: keksik on November 19, 2018, 04:47:01 PM

i have first batch z9mini hashing 750Mhz stable for months. may i ask what benefits have your firmware about bitmains from batch 1?

thanks

my batch 1 minis run best at 762mhz batch 4 at 737

... How did you managed to choose 762?

thanks

May be this metod: https://www.youtube.com/watch?v=EcHiY6iNYYM

keksik

jr. member

Activity: 169

Merit: 1

Quote from: chipless on November 19, 2018, 11:25:59 PM

Quote from: keksik on November 19, 2018, 04:47:01 PM

i have first batch z9mini hashing 750Mhz stable for months. may i ask what benefits have your firmware about bitmains from batch 1?

thanks

my batch 1 minis run best at 762mhz batch 4 at 737

i can choose only 750Mhz max, i do not have more options. How did you managed to choose 762?

thanks

sensor2

newbie

Activity: 1

Merit: 0

give a link to download the new Z9 mini firmware

chipless

jr. member

Activity: 559

Merit: 4

Quote from: efudd on November 20, 2018, 10:21:39 PM

Quote from: efudd on November 20, 2018, 06:42:04 PM

I need a couple of testers for v2.1 for the Z9 Mini, and v2.1 for the Z9 large.

Send me a PM if you are interested -- I want to get some additional verification before "opening the floodgates".

Thank you,

Jason

Thank you all, I have a few responses now.

I have a couple of others testing and a couple of testers I'm waiting to install the firmware. I want to be careful with this -- I've already found one bug in the server I had to fix. The firmware I'm confident in... just need to validate the infrastructure a little more before releasing it en masse.

Thank you,

Jason

PM sent

efudd

member

Activity: 504

Merit: 51

Quote from: efudd on November 20, 2018, 06:42:04 PM

I need a couple of testers for v2.1 for the Z9 Mini, and v2.1 for the Z9 large.

Send me a PM if you are interested -- I want to get some additional verification before "opening the floodgates".

Thank you,

Jason

Thank you all, I have a few responses now.

I have a couple of others testing and a couple of testers I'm waiting to install the firmware. I want to be careful with this -- I've already found one bug in the server I had to fix. The firmware I'm confident in... just need to validate the infrastructure a little more before releasing it en masse.

Thank you,

Jason

efudd

member

Activity: 504

Merit: 51

I need a couple of testers for v2.1 for the Z9 Mini, and v2.1 for the Z9 large.

Send me a PM if you are interested -- I want to get some additional verification before "opening the floodgates".

Thank you,

Jason

chipless

jr. member

Activity: 559

Merit: 4

Quote from: ZergeZ on November 20, 2018, 07:05:40 AM

Quote from: efudd on November 20, 2018, 12:21:17 AM

Folk,

...After this release I am focused on hardware aspects; specifically getting control over the fan, temp, and hopefully voltage. I've put a number of hours into research and testing on those aspects and now have some confidence in my understanding of how the controls currently work -- its just a matter of me getting control over them now.
.....
Thank you,
Jason

I think that you firstly need to learn how to change the voltage on the chips, and only then - control the fan. Although it’s likely to be related things.

I have several devices from different batches: 1,2,3. And they all work differently: 1 batch - when the frequency increases from 500 to 750, the voltage also changes from 0.8V to 0.85V

2 - batch: with increasing frequency - the voltage changes, but at a frequency of about 668-700 current protection is activated, and the PWM converter turns off
3 - batch: - When changing the frequency, the voltage DOES NOT CHANGE. At any frequency - the voltage on the chips is 0.8V

I use immersion cooling, and the temperature on the chips is less than 50 degrees at any frequency, on any batch. Therefore, if it were possible to control the voltage, I could easily check how much the maximum frequency could be increased.

If voltage cant control thru the software a hardware mod can be done to increase the voltage higher then the .80 as with most devices if you increase the freq the power needs to rise some to make it effective

ZergeZ

newbie

Activity: 24

Merit: 1

Quote from: efudd on November 20, 2018, 12:21:17 AM

Folk,

...After this release I am focused on hardware aspects; specifically getting control over the fan, temp, and hopefully voltage. I've put a number of hours into research and testing on those aspects and now have some confidence in my understanding of how the controls currently work -- its just a matter of me getting control over them now.
.....
Thank you,
Jason

I think that you firstly need to learn how to change the voltage on the chips, and only then - control the fan. Although it’s likely to be related things.

I have several devices from different batches: 1,2,3. And they all work differently: 1 batch - when the frequency increases from 500 to 750, the voltage also changes from 0.8V to 0.85V

2 - batch: with increasing frequency - the voltage changes, but at a frequency of about 668-700 current protection is activated, and the PWM converter turns off
3 - batch: - When changing the frequency, the voltage DOES NOT CHANGE. At any frequency - the voltage on the chips is 0.8V

I use immersion cooling, and the temperature on the chips is less than 50 degrees at any frequency, on any batch. Therefore, if it were possible to control the voltage, I could easily check how much the maximum frequency could be increased.

chipless

jr. member

Activity: 559

Merit: 4

Jason if you can find the right software to run the firmware over JTAG you can monitor each and every step the machine does from boot and usually the emulator will allow changes on the fly. I use to use a AVR and Dallas Microcontroller emulators to write code for other types of devices which were reversed engineered. I will do some searching to see if there is any info on the JTAG for Bitmain miners. The you would need an ARM emulator that supports JTAG.

Topic: Efudd Z-Series Fuddware 2.3 -Z11/Z11e/Z11j/Z9/Mini - page 32. (Read 45527 times)