Efudd Z-Series Fuddware 2.3 -Z11/Z11e/Z11j/Z9/Mini - page 30.

KrK27

newbie

Activity: 11

Merit: 0

Quote from: efudd on November 26, 2018, 11:15:42 PM

Quote from: KrK27 on November 26, 2018, 11:11:54 PM

....snip...

Hive OS installed in your firm, works perfect.

After apply flightsheet can set individual freqs for each board Wink

Awesome! Can you tell me more on this? What is flightsheet? Is this something other users of hive should be able to do easily?

Jason

Flightsheet is pool, wallet and pass preconfig in hive os server account, with this you can set any of your prefer coin config from a remote control (mobile,tablet ectr) at "click", and z9 start mine this.

efudd

member

Activity: 504

Merit: 51

Quote from: KrK27 on November 26, 2018, 11:11:54 PM

....snip...

Hive OS installed in your firm, works perfect.

After apply flightsheet can set individual freqs for each board Wink

Awesome! Can you tell me more on this? What is flightsheet? Is this something other users of hive should be able to do easily?

Jason

KrK27

newbie

Activity: 11

Merit: 0

Quote from: KrK27 on November 26, 2018, 10:10:32 PM

Quote from: efudd on November 26, 2018, 10:03:50 PM

Quote from: KrK27 on November 26, 2018, 10:02:22 PM

Quote from: efudd on November 26, 2018, 07:32:58 PM

Version 2.1 is now available for Z9, Mini, and Paid users; please see the original post for information. I will update the post with more details in the next few hours.

At this point in time, I am not selling additional licenses -- I need to get these images out there and the regular paid users updated before I expand; in the interim, I welcome you to use the dev-fee supported version to ensure that this firmware meets your needs.

Thank you,

Jason

Is possible use with hive os?

What parameters set for each board freq in hive os?

I cannot speak to HiveOS other than I think it will work with it, however HiveOS would have to add support for board frequencies.

Jason

Thanks, in next hours i try this and post here those tests

Hive OS installed in your firm, works perfect.

After apply flightsheet can set individual freqs for each board Wink

KrK27

newbie

Activity: 11

Merit: 0

Quote from: efudd on November 26, 2018, 10:03:50 PM

Quote from: KrK27 on November 26, 2018, 10:02:22 PM

Quote from: efudd on November 26, 2018, 07:32:58 PM

Version 2.1 is now available for Z9, Mini, and Paid users; please see the original post for information. I will update the post with more details in the next few hours.

At this point in time, I am not selling additional licenses -- I need to get these images out there and the regular paid users updated before I expand; in the interim, I welcome you to use the dev-fee supported version to ensure that this firmware meets your needs.

Thank you,

Jason

Is possible use with hive os?

What parameters set for each board freq in hive os?

I cannot speak to HiveOS other than I think it will work with it, however HiveOS would have to add support for board frequencies.

Jason

Thanks, in next hours i try this and post here those tests

efudd

member

Activity: 504

Merit: 51

Quote from: KrK27 on November 26, 2018, 10:02:22 PM

Quote from: efudd on November 26, 2018, 07:32:58 PM

Version 2.1 is now available for Z9, Mini, and Paid users; please see the original post for information. I will update the post with more details in the next few hours.

At this point in time, I am not selling additional licenses -- I need to get these images out there and the regular paid users updated before I expand; in the interim, I welcome you to use the dev-fee supported version to ensure that this firmware meets your needs.

Thank you,

Jason

Is possible use with hive os?

What parameters set for each board freq in hive os?

I cannot speak to HiveOS other than I think it will work with it, however HiveOS would have to add support for board frequencies.

Jason

KrK27

newbie

Activity: 11

Merit: 0

Quote from: efudd on November 26, 2018, 07:32:58 PM

Version 2.1 is now available for Z9, Mini, and Paid users; please see the original post for information. I will update the post with more details in the next few hours.

At this point in time, I am not selling additional licenses -- I need to get these images out there and the regular paid users updated before I expand; in the interim, I welcome you to use the dev-fee supported version to ensure that this firmware meets your needs.

Thank you,

Jason

Is possible use with hive os?

What parameters set for each board freq in hive os?

efudd

member

Activity: 504

Merit: 51

Quote from: MoNTE48 on November 26, 2018, 08:01:03 PM

Hi, please, fix link for z9-mini firmware in first message. =)

Ah.. sorry, thank you for catching that. It is fixed.

Jason

MoNTE48

newbie

Activity: 29

Merit: 0

Hi, please, fix link for z9-mini firmware in first message. =)

efudd

member

Activity: 504

Merit: 51

Version 2.1 is now available for Z9, Mini, and Paid users; please see the original post for information. I will update the post with more details in the next few hours.

At this point in time, I am not selling additional licenses -- I need to get these images out there and the regular paid users updated before I expand; in the interim, I welcome you to use the dev-fee supported version to ensure that this firmware meets your needs.

Thank you,

Jason

efudd

member

Activity: 504

Merit: 51

As an aside, I have 2x $55 and 2x $90 bitmain coupons available that are good through the 30th. first come first serve for free *IF* you are going to use them.

thank you,

jason

efudd

member

Activity: 504

Merit: 51

Quote from: tahoeminer on November 26, 2018, 01:17:42 AM

Hi Jason, I was wondering if you are going to e-mail the paid Z9 users a file to upload to the latest image you are providing, so we don't have to use the dev fee? I hope you had a great time with the family for Thanksgiving too! Thanks

@tahoe - since I don't have everyone's email, no. But, your original link will currently work to provide you "half" of the instructions. Your link will currently provide you your license and instruction -- I just need to finish the image.

I tried to keep track of who contacted me how, but it became a little complicated.

I will release an image tomorrow night (well, late tonight now since it is 12:36AM at this point) for paid users at least. I'm confident in that infrastructure and the image now, save for one bug that won't take me long to fix.

Jason

tahoeminer

newbie

Activity: 7

Merit: 0

Hi Jason, I was wondering if you are going to e-mail the paid Z9 users a file to upload to the latest image you are providing, so we don't have to use the dev fee? I hope you had a great time with the family for Thanksgiving too! Thanks

efudd

member

Activity: 504

Merit: 51

Image will be released for Z9 paid, and mini users tomorrow evening, 11/26/2018. I've received feedback from the beta testers and will be incorporating the necessary fixes.

The delay this time is simply it was Thanksgiving and family took priority. :-)

thank you,

jason

doZerilla

newbie

Activity: 5

Merit: 0

Quote from: efudd on November 24, 2018, 09:56:46 PM

Quote from: doZerilla on November 24, 2018, 08:42:44 PM

Cheers

Fixed?

Yes, thanks for that!
I have them remotely hosted so had to arrange for the cables to be checked.

Cheers.

efudd

member

Activity: 504

Merit: 51

Quote from: doZerilla on November 24, 2018, 08:42:44 PM

Cheers

Fixed?

doZerilla

newbie

Activity: 5

Merit: 0

Cheers

chipless

jr. member

Activity: 559

Merit: 4

Quote from: efudd on November 23, 2018, 10:16:47 AM

Quote from: doZerilla on November 23, 2018, 06:51:35 AM

Hi,

I used this software and my 3rd chain is missing?

I tried loading up default firmware and the chain is still missing?

Thanks

Hi. Then the problem is not the firmware. That said, turn off miner. Reseat all power connectors and the data cables between the control board and the hash board. See if problem persists. If so, swap control and power cables between boards 2 and 3 to isolate whether it is the board or the cable or power. A simple set of logical steps will let you isolate the hardware component.

Jason

I have noticed many of the cables aren't snap-locked all the way in the socket

efudd

member

Activity: 504

Merit: 51

Quote from: doZerilla on November 23, 2018, 06:51:35 AM

Hi,

I used this software and my 3rd chain is missing?

I tried loading up default firmware and the chain is still missing?

Thanks

Hi. Then the problem is not the firmware. That said, turn off miner. Reseat all power connectors and the data cables between the control board and the hash board. See if problem persists. If so, swap control and power cables between boards 2 and 3 to isolate whether it is the board or the cable or power. A simple set of logical steps will let you isolate the hardware component.

Jason

doZerilla

newbie

Activity: 5

Merit: 0

Hi,

I used this software and my 3rd chain is missing?

I tried loading up default firmware and the chain is still missing?

Thanks

ZergeZ

newbie

Activity: 24

Merit: 1

Quote from: L1nk1g on November 22, 2018, 09:48:23 PM

@ZergeZ
A lil bit off topic, could you post some images of that immersive cooling and possibly share how much did it cost you to install it.

I everything described in other forum - there are 2 my reviews about watercooling - one about videocards and one about immersion cooling 6*z9mini.
You can read and see photos here: https://miningclub.info/threads/zhidkostnoe-oxlazhdenie-ot-videokart-do-asic-ov.50759/
There are Russian language but you can use google translator.

Topic: Efudd Z-Series Fuddware 2.3 -Z11/Z11e/Z11j/Z9/Mini - page 30. (Read 45506 times)