[ESHOP launched] Trezor: Bitcoin hardware wallet - page 65.

keithers

legendary

Activity: 1456

Merit: 1001

This is the land of wolves now & you're not a wolf

Quote from: jackbox on April 16, 2015, 02:11:18 AM

Quote from: keithers on April 16, 2015, 02:08:33 AM

When updating firmware, is the recovery seed always required?

Only if the update goes FUBAR. Normally it updates and you just keep using it. No wiping or reseeding.

ok thanks...I still haven't updated my firmware since I got mine...I think I am two firmwares behind now...

rammy2k2

legendary

Activity: 1974

Merit: 1003

I updated to latest firmware with no problems at all.
Phew

Hawkix

hero member

Activity: 531

Merit: 505

Entering private key anywhere on your PC is unsafe. No need to use trezor for it.

It would be better to allow to enter the private key completely into Trezor, without revealing it to the PC.

For example, trezor could show RANDOM letters from base58 alphabet, in the 3x3 matrix as for the PIN. 8 random letters, 9th for "Other". Since private key is 256 bits, it would require about 256/3 = 86 steps to enter single key. Alternatively, one of buttons can be used for Other, resulting in 80 steps and some button presses on Trezor.

binford

newbie

Activity: 52

Merit: 0

can we get a sweep private key feature in mytrezor.com? please, please, with sugar on top

use case: enter private key in the web form, use as input in a payment
send the coins to either a trezor address (sweeping) or any bitcoin address (payment) with the rest going to trezor ...

workaround is using any wallet that can import priv key. would be great if mytrezor would be capable of it.

cypherdoc

legendary

Activity: 1764

Merit: 1002

Quote from: cor on April 12, 2015, 11:31:46 AM

Quote from: fonsie on April 12, 2015, 04:25:38 AM

Quote from: jackbox on April 12, 2015, 12:04:00 AM

Can someone give me a step by step on how to change the Trezor idle graphic using Windows 8.1 please? I wish it was just part of MyTrezor.com where you could select an image and tell it to use it. Thanks.

Step 1) Get https://github.com/trezor/python-trezor installed
Step 2) Change homescreen using proper commands

A user-friendly homescreen upload should come with next myTrezor.com release if I remember well.

i can't seem to get the python-trezor hack to work with 12.04?

jackbox

legendary

Activity: 1246

Merit: 1024

Quote from: keithers on April 16, 2015, 02:08:33 AM

When updating firmware, is the recovery seed always required?

Only if the update goes FUBAR. Normally it updates and you just keep using it. No wiping or reseeding.

keithers

legendary

Activity: 1456

Merit: 1001

This is the land of wolves now & you're not a wolf

When updating firmware, is the recovery seed always required?

cypherdoc

legendary

Activity: 1764

Merit: 1002

Quote from: BitcoinIsLiberty on April 15, 2015, 06:29:06 PM

Coinpayments First to Implement Secure Trezor Login
https://www.coinpayments.net/login

any tips on process?

BitcoinIsLiberty

newbie

Activity: 55

Merit: 0

Coinpayments First to Implement Secure Trezor Login
https://www.coinpayments.net/login

binford

newbie

Activity: 52

Merit: 0

Quote from: jackbox on April 14, 2015, 11:33:35 AM

Also, on the website have you gone into advanced options and checked the box for password use? The plugin might have updated and the option might have gotten unselected. The Trezor doesn't know if you have a password. It is up to the website or wallet software to prompt for one. Without a password you have a distinct wallet with its own keys. With the password you have another wallet with different keys. It may be as simple as the option to prompt for the password having gotten unselected.

in response to 600watt this would have been my tip, see the advanced options before wiping. the wallet was most probably just fine and did not prompt for password, no need to wipe & restore. but good to read you found your way

jackbox

legendary

Activity: 1246

Merit: 1024

Quote from: 600watt on April 15, 2015, 04:52:46 AM

ok, i contacted support and followed their suggestions (wipe the device) it was kind of exiting to wipe it.

all accounts restored, the coins are safe, trezor is running fine.

everything is fine, the support was precise, friendly and fast.

thumbs up.

As long as you have your seed safely backed up nothing to ever worry about. Glad you got your Trezor working correctly again and restored access to your hard earned bitcoins. :-D

600watt

legendary

Activity: 2338

Merit: 2106

Quote from: jackbox on April 14, 2015, 11:30:52 AM

Quote from: fonsie on April 14, 2015, 09:04:36 AM

Quote from: 600watt on April 14, 2015, 06:22:23 AM

Quote from: defcon23 on April 11, 2015, 05:12:01 AM

Quote from: 600watt on April 11, 2015, 04:52:55 AM

ok, i have updated my trezor.

when i plug it in, it asks for the pin. after i punch in the pin it shows the device name but that is it. it does not ask for the passphrase. what should i do ? (tried several times to disconnect it and plugged it in again. always the same. it seems to try to load something, but it never gets there.)

have you tried to plug it in another computer? or to run it with electrum instead of mytrezor plugin ?

tried several computers. getting worried. lots of coins...

i will write costumer support now.

Why on earth would you be getting worried? Didn't you write down the seed?

Also, they warn people to move coins temporarily during an update if they have large balances just in case. You can create a new wallet from the seed and password and then wipe the Trezor and start over and then send the funds to the wiped and new seeded Trezor. After wiping you might want to run the firmware update again just to be safe. As long as you have your seed and know your password the coins are safe and there is nothing to worry about.

ok, i contacted support and followed their suggestions (wipe the device) it was kind of exiting to wipe it.

all accounts restored, the coins are safe, trezor is running fine.

everything is fine, the support was precise, friendly and fast.

thumbs up.

jackbox

legendary

Activity: 1246

Merit: 1024

Also, on the website have you gone into advanced options and checked the box for password use? The plugin might have updated and the option might have gotten unselected. The Trezor doesn't know if you have a password. It is up to the website or wallet software to prompt for one. Without a password you have a distinct wallet with its own keys. With the password you have another wallet with different keys. It may be as simple as the option to prompt for the password having gotten unselected.

jackbox

legendary

Activity: 1246

Merit: 1024

Quote from: fonsie on April 14, 2015, 09:04:36 AM

Quote from: 600watt on April 14, 2015, 06:22:23 AM

Quote from: defcon23 on April 11, 2015, 05:12:01 AM

Quote from: 600watt on April 11, 2015, 04:52:55 AM

ok, i have updated my trezor.

when i plug it in, it asks for the pin. after i punch in the pin it shows the device name but that is it. it does not ask for the passphrase. what should i do ? (tried several times to disconnect it and plugged it in again. always the same. it seems to try to load something, but it never gets there.)

have you tried to plug it in another computer? or to run it with electrum instead of mytrezor plugin ?

tried several computers. getting worried. lots of coins...

i will write costumer support now.

Why on earth would you be getting worried? Didn't you write down the seed?

Also, they warn people to move coins temporarily during an update if they have large balances just in case. You can create a new wallet from the seed and password and then wipe the Trezor and start over and then send the funds to the wiped and new seeded Trezor. After wiping you might want to run the firmware update again just to be safe. As long as you have your seed and know your password the coins are safe and there is nothing to worry about.

BG4

legendary

Activity: 1006

Merit: 1024

PaperSafe

Quote from: 600watt on April 14, 2015, 07:31:18 AM

Quote from: defcon23 on April 14, 2015, 06:47:47 AM

Quote from: 600watt on April 14, 2015, 06:22:23 AM

Quote from: defcon23 on April 11, 2015, 05:12:01 AM

Quote from: 600watt on April 11, 2015, 04:52:55 AM

ok, i have updated my trezor.

when i plug it in, it asks for the pin. after i punch in the pin it shows the device name but that is it. it does not ask for the passphrase. what should i do ? (tried several times to disconnect it and plugged it in again. always the same. it seems to try to load something, but it never gets there.)

have you tried to plug it in another computer? or to run it with electrum instead of mytrezor plugin ?

tried several computers. getting worried. lots of coins...

i will write costumer support now.

maybe a stupid quetion... but : when you see the device name on the screen, have you tried to just clik on it to see what happend ?

cannot click on the device name

Did you try a new usb cable....

fonsie

sr. member

Activity: 434

Merit: 250

Quote from: 600watt on April 14, 2015, 06:22:23 AM

Quote from: defcon23 on April 11, 2015, 05:12:01 AM

Quote from: 600watt on April 11, 2015, 04:52:55 AM

ok, i have updated my trezor.

when i plug it in, it asks for the pin. after i punch in the pin it shows the device name but that is it. it does not ask for the passphrase. what should i do ? (tried several times to disconnect it and plugged it in again. always the same. it seems to try to load something, but it never gets there.)

have you tried to plug it in another computer? or to run it with electrum instead of mytrezor plugin ?

tried several computers. getting worried. lots of coins...

i will write costumer support now.

Why on earth would you be getting worried? Didn't you write down the seed?

600watt

legendary

Activity: 2338

Merit: 2106

Quote from: defcon23 on April 14, 2015, 06:47:47 AM

Quote from: 600watt on April 14, 2015, 06:22:23 AM

Quote from: defcon23 on April 11, 2015, 05:12:01 AM

Quote from: 600watt on April 11, 2015, 04:52:55 AM

ok, i have updated my trezor.

when i plug it in, it asks for the pin. after i punch in the pin it shows the device name but that is it. it does not ask for the passphrase. what should i do ? (tried several times to disconnect it and plugged it in again. always the same. it seems to try to load something, but it never gets there.)

have you tried to plug it in another computer? or to run it with electrum instead of mytrezor plugin ?

tried several computers. getting worried. lots of coins...

i will write costumer support now.

maybe a stupid quetion... but : when you see the device name on the screen, have you tried to just clik on it to see what happend ?

cannot click on the device name

defcon23

legendary

Activity: 1120

Merit: 1002

Quote from: 600watt on April 14, 2015, 06:22:23 AM

Quote from: defcon23 on April 11, 2015, 05:12:01 AM

Quote from: 600watt on April 11, 2015, 04:52:55 AM

ok, i have updated my trezor.

when i plug it in, it asks for the pin. after i punch in the pin it shows the device name but that is it. it does not ask for the passphrase. what should i do ? (tried several times to disconnect it and plugged it in again. always the same. it seems to try to load something, but it never gets there.)

have you tried to plug it in another computer? or to run it with electrum instead of mytrezor plugin ?

tried several computers. getting worried. lots of coins...

i will write costumer support now.

maybe a stupid quetion... but : when you see the device name on the screen, have you tried to just clik on it to see what happend ?

600watt

legendary

Activity: 2338

Merit: 2106

Quote from: defcon23 on April 11, 2015, 05:12:01 AM

Quote from: 600watt on April 11, 2015, 04:52:55 AM

ok, i have updated my trezor.

when i plug it in, it asks for the pin. after i punch in the pin it shows the device name but that is it. it does not ask for the passphrase. what should i do ? (tried several times to disconnect it and plugged it in again. always the same. it seems to try to load something, but it never gets there.)

have you tried to plug it in another computer? or to run it with electrum instead of mytrezor plugin ?

tried several computers. getting worried. lots of coins...

i will write costumer support now.

cor

full member

Activity: 121

Merit: 100

Quote from: defcon23 on April 10, 2015, 10:17:40 AM

Quote from: NLNico on April 09, 2015, 10:27:19 PM

Quote from: BitcoinIsLiberty on April 09, 2015, 01:46:39 PM

Extracting the Private Key from a TREZOR... with a 70 $ Oscilloscope
http://johoe.mooo.com/trezor-power-analysis/

johoe, same guy who returned 250 coins to blockchain.info. Very impressive.

impressive is THE perfect word here... Shocked

I second that, Johoe is a very smart guy and very gentleman.

Topic: [ESHOP launched] Trezor: Bitcoin hardware wallet - page 65. (Read 966173 times)