[ETH] ethpool.org-Predictable ETH solo mining pool - Stratum & VarDiff - page 4.

Eliovp

legendary

Activity: 1050

Merit: 1293

Huh?

Was mining solo for a while, lately the hash rate has grown so much, same with diff that i decided to go back to pool mining.

I didn't want to join a pool that has a to high hash rate so i chose this one.

I have to say that after 2 full days of mining, i'm a very happy person.

So i can only encourage people to join as well!

"The fee part hurts a bit because applying a fee of 1% sounds low but if you take 1% from a serious amount of miners, that's a pure win win situation"
"And yes i know, bills have to be payed, server costs etc.. "

Anyhow, to the admin(s). Keep it up!

Matias

full member

Activity: 182

Merit: 101

Thank you!

Kalder

full member

Activity: 168

Merit: 100

Quote from: Matias on March 07, 2016, 09:46:19 AM

does qtminer support multiple gpu:s on the same pc?

Yes. If you not use -t or -opncl-device, it will use all the GPUs by default.

--opencl-device When mining using -G/--opencl use OpenCL device n (default: 0).
-t, --mining-threads Limit number of CPU/GPU miners to n (default: use everything available on selected platform)

Matias

full member

Activity: 182

Merit: 101

does qtminer support multiple gpu:s on the same pc?

Kalder

full member

Activity: 168

Merit: 100

Quote from: Matias on March 04, 2016, 07:19:15 AM

I just finally got my miner on and joined your pool. I can see my worker and Mh/s, so everything is OK.

But now an extremely embarrassing newbie question: how can I get my money?

I know I haven't got anything yet, but when I finally get some eth, how can I move it?

I know my coinbase, what next?

Start QtMiner using the following command: qtminer.exe -u <Your_Ethereum_Address>. -G

So you already have the address. The Ethereum will be sent to you directly.

etherchain

newbie

Activity: 35

Merit: 0

No, you will need at least 2GB of GPU RAM to mine ethereum.

Today we have added the following new features:

We have added another server located in Asia (Singapore), it is accessible via asia.ethpool.org.
Instead of the number of invalid shares we now show an invalid share ratio and highlight all workers with an invalid share ratio above 5% (orange) and 10% (red).
Email notifications for inactive workers are now working again. You will receive a mail if your worker did not send a valid share for 30 minutes.
In the blocks overview of your account page we now show if you retrieved your reward for a block or an uncle

willi9974

legendary

Activity: 3430

Merit: 2663

Escrow Service

it is possible to mine with gpu NVS 4200M with 1GB memory?

Code:

  i  22:03:28|main  Connecting to stratum server ethpool.org : 3333
  i  22:03:28|main  Connection to stratum server established!
OpenCL device NVS 4200M has insufficient GPU memory.1073741824 bytes of memory found < 1423739904 bytes of memory required
No GPU device with sufficient memory was found. Can't GPU mine. Remove the -G argument
QWaitCondition: Destroyed while threads are still waiting

Best Regrads
Willi

Matias

full member

Activity: 182

Merit: 101

I started mining here couple of days ago. When I click my account link

https://etherchain.org/account/0xc168a39a8068c42a650e944ebfab87bfa4b1434b

I get error message "Error: Account '0xc168a39a8068c42a650e944ebfab87bfa4b1434b' not found!"

Is it because I don't yet have any ether or is there some other problem?

RastoMan

sr. member

Activity: 294

Merit: 250

Quote from: etherchain on March 05, 2016, 02:36:26 AM

Unfortunately our hosting provider experienced electrical issues in one of his data centers which affected both our main and backup pool server. As our provider failed to comply with the agreed SLA we expect a compensation payment which will be distributed to all miners. As a compensation from our side the pool fee will be reduced to 0% for today.

We are sorry for the inconvenience!

It would be better to have main and back up pool in different cities. So that they will not be hit by electrical issue at the same time.

Taxidermista

legendary

Activity: 1147

Merit: 1001

Quote from: etherchain on March 05, 2016, 02:36:26 AM

Unfortunately our hosting provider experienced electrical issues in one of his data centers which affected both our main and backup pool server. As our provider failed to comply with the agreed SLA we expect a compensation payment which will be distributed to all miners. As a compensation from our side the pool fee will be reduced to 0% for today.

We are sorry for the inconvenience!

Thank you for the update. Is the problem fixed? Because the pool hashrate is still too low.

etherchain

newbie

Activity: 35

Merit: 0

Unfortunately our hosting provider experienced electrical issues in one of his data centers which affected both our main and backup pool server. As our provider failed to comply with the agreed SLA we expect a compensation payment which will be distributed to all miners. As a compensation from our side the pool fee will be reduced to 0% for today.

We are sorry for the inconvenience!

molitar

sr. member

Activity: 322

Merit: 250

This pool is definitely not for small miners.

Status

Current Hashrate: 46.9 MH/s
Note: The current hashrate is calculated using a 60 minute window. If you start mining on the pool it will take up to 2 hours till the displayed hashrate is accurate.
Average Hashrate (last 24h): 32.3 MH/s
Credits: 375.000b
Approximate time to next block: 6 days

I make about 1.2 coins/day on Suprnova so for those that have low hash rate miners your better off on another pool. If you have 70+ this will probably work for you. So I recommend any small miners to look elsewhere for most profit. If I can later pick up a couple more GPU for a total of 4 than I will move to this pool.

Matias

full member

Activity: 182

Merit: 101

I just finally got my miner on and joined your pool. I can see my worker and Mh/s, so everything is OK.

But now an extremely embarrassing newbie question: how can I get my money?

I know I haven't got anything yet, but when I finally get some eth, how can I move it?

I know my coinbase, what next?

etherchain

newbie

Activity: 35

Merit: 0

Can you please post the output of qtminer. Both servers use the same backend, so there should be no difference in work distribution.

Kalder

full member

Activity: 168

Merit: 100

I have the similar problem. When I connect to the EU1 server, the qtminer have more chance in displaying the "wait for work". When I connect to the US server, I have fewer "wait for work". When it is waiting for work, the miner does not mine.

My ping to EU server is 50 ms, to the US server is 100ms.

etherchain

newbie

Activity: 35

Merit: 0

I am not sure what you mean by "waiting for work"? Can you please create a support request for such issues. The pool was not that lucky during the last days, this might explain your reduced profits as well.

Regarding the outage yesterday, we are very sorry. The underlying root cause has been identified and eliminated.

ethpool.org works with every card, you will just need to wait some days till you receive your block reward.

molitar

sr. member

Activity: 322

Merit: 250

Is a pool like this only good for 50MH/s+ or can you still do good with 2 R9 280X cards in this type of pool?

RastoMan

sr. member

Activity: 294

Merit: 250

I also have such problem. It reduced my earning by about 10% so far. Is there any reason for that phenomenon?

djoser

member

Activity: 122

Merit: 16

Hello ethpool-admins,

I can confirm the issue Mastsetad described.
Please investigate.

djoser.

Mastsetad

sr. member

Activity: 672

Merit: 250

I am in Europe. I use the EU server now. After yesterday's outage, I notice there are lot of waiting for work for the rigs. So some times the GPU are not working 100%. When I connect to the US server, there is no such problem.

Topic: [ETH] ethpool.org-Predictable ETH solo mining pool - Stratum & VarDiff - page 4. (Read 15158 times)