BFGminer 3.5.1 gives hardware errors, switch to the modded BFG 3.2 build and you won't have any hardware errors
Download link in quoted message
Here are my stats using 3.2. No HW errors even on the overclocked Blues
Download link in quoted message
1 ) Download Alpha Drivers Here : http://www.mediafire.com/download/819me4zvdju8lyg/bfgminerWin.zip
2 ) Extract and note where the bf1.ini is located in the folder.
3 ) Plug in your Blue Fury Miner and go to Control Panel > Hardware and Sound > Devices and printers
4 ) Right Click on the Bitfury BF1 Device go to Properties > Hardware > Properties > Change Settings > Driver > Update Driver
5 ) Select "Browse My computer for Driver Software"
6 ) Select "Let me pick from a list of device drivers on my computer"
7 ) Select "Have Disk", Browse to the bfgminerWin folder and Select bf1.ini
8 ) Select Install and it will give you a warning that the driver is NOT SIGNED. Press okay.
9 ) Now that the Driver is installed navigate to bfgminerWin > bfgminer32
10 ) Edit the #Mine.bat file in Notepad and change everything after "-O" to your own mining pool information and save.
11 ) Double click #Mine.bat and start mining Smiley
2 ) Extract and note where the bf1.ini is located in the folder.
3 ) Plug in your Blue Fury Miner and go to Control Panel > Hardware and Sound > Devices and printers
4 ) Right Click on the Bitfury BF1 Device go to Properties > Hardware > Properties > Change Settings > Driver > Update Driver
5 ) Select "Browse My computer for Driver Software"
6 ) Select "Let me pick from a list of device drivers on my computer"
7 ) Select "Have Disk", Browse to the bfgminerWin folder and Select bf1.ini
8 ) Select Install and it will give you a warning that the driver is NOT SIGNED. Press okay.
9 ) Now that the Driver is installed navigate to bfgminerWin > bfgminer32
10 ) Edit the #Mine.bat file in Notepad and change everything after "-O" to your own mining pool information and save.
11 ) Double click #Mine.bat and start mining Smiley
Here are my stats using 3.2. No HW errors even on the overclocked Blues
Code:
bfgminer version 3.2.0 - Started: [2013-11-12 11:54:23] - [ 0 days 04:35:16]
[M]anage devices [P]ool management [S]ettings [D]isplay options [H]elp [Q]uit
Connected to eu-stratum-lb489kj.btcguild.com diff 16 with stratum as user Zammo
Block: ...89db1e47 #269248 Diff:511M ( 3.66Ph/s) Started: [16:29:00]
ST:5 F:1 NB:39 AS:1 BW:[ 56/ 42 B/s] E:114.03 U:21.2/m BS:73.8k
10 | 27.84/28.28/23.51Gh/s | A:5838 R:84+5(.81%) HW:0/none
--------------------------------------------------------------------------------
BF1 0: BF1 1517230D | 2.26/ 2.27/ 1.96Gh/s | A: 483 R: 5+0(.34%) HW:0/none
BF1 1: BF1 15191024 | 2.35/ 2.35/ 2.22Gh/s | A: 551 R: 9+0(.84%) HW:0/none
BF1 2: BF1 15170E00 | 2.35/ 2.35/ 2.11Gh/s | A: 528 R:10+1(1.0%) HW:0/none
BF1 3: BF1 150D1615 | 2.40/ 2.40/ 2.13Gh/s | A: 530 R:11+2(1.1%) HW:0/none
BF1 4: BF1 150C1612 | 3.66/ 3.67/ 2.69Gh/s | A: 673 R: 5+0(.50%) HW:0/none
BF1 5: BF1 1511211C | 3.64/ 3.64/ 2.55Gh/s | A: 633 R: 8+1(.87%) HW:0/none
BF1 6: BF1 150C0B12 | 3.69/ 3.71/ 2.71Gh/s | A: 668 R: 4+0(.08%) HW:0/none
BF1 7: BF1 150C1F13 | 2.37/ 2.37/ 2.28Gh/s | A: 569 R: 5+1(.93%) HW:0/none
BF1 8: BF1 150F0D0D | 3.16/ 3.18/ 2.74Gh/s | A: 675 R:13+0(1.1%) HW:0/none
BF1 9: BF1 15111203 | 2.33/ 2.33/ 2.13Gh/s | A: 528 R:14+0(1.4%) HW:0/none
--------------------------------------------------------------------------------
[2013-11-12 16:29:23] Accepted 0873b894 BF1 6 pool 0 Diff 30/16
[2013-11-12 16:29:24] Accepted 06367ab0 BF1 4 pool 0 Diff 41/16
[2013-11-12 16:29:25] Stratum from pool 0 requested work update
[2013-11-12 16:29:29] Accepted 0019858e BF1 7 pool 0 Diff 2.57k/16
[2013-11-12 16:29:29] Accepted 0a3ac38a BF1 3 pool 0 Diff 25/16
[2013-11-12 16:29:30] Accepted 08fedf72 BF1 5 pool 0 Diff 28/16
[2013-11-12 16:29:38] Accepted 0fc68282 BF1 6 pool 0 Diff 16/16
Every device has some hardware errors, especially overclocked ones, I don't believe BFGMiner3.2.0
The most important figure is the hash rate reported at the pool.
it really works ? It is beacuse you lower the resistance? 
