Pages:
Author

Topic: [EU/UK GROUP BUY] Blue Fury USB miner 2.2 - 2.7 GH/s - page 12. (Read 64842 times)

jml
full member
Activity: 238
Merit: 100
Just wondering if anyone is having the same HW error rate as I am when using bluefury with bfgminer 3.5.1?

Over 5 hours hashing now and I have noticed an increase in HW errors. In comparison with ASICMiner, I have 0.9% of HW errors and with bluefury I am getting between 3.7% and 5.3%. Quite high in comparison with the ASICMiner BE USB and blade!

PXY 0 is my overclocked ASICMiner blade and BES are the ASICMiner USB BE's.

Code:
 bfgminer version 3.5.1 - Started: [2013-11-11 17:17:19] - [  0 days 05:27:11]
 [M]anage devices [P]ool management [S]ettings [D]isplay options  [H]elp [Q]uit
 Connected to ****** diff 16 with stratum as user ***
 Block: ...77ec57a0 #269097  Diff:511M ( 3.66Ph/s)  Started: [22:42:01]
 ST:27  F:0  NB:35  AS:0  BW:[108/ 48 B/s]  E:83.24  I: 1.13mBTC/hr  BS:100k
 26           | 29.38/28.87/28.03Gh/s | A:8021 R:99+5(1.2%) HW:2700/1.9%
--------------------------------------------------------------------------------
 PXY 0:       | 12.49/12.64/12.28Gh/s | A:3630 R:74+5(1.9%) HW: 576/1.0%
 ECM 0:       | 269.1/323.9/396.5Mh/s | A: 112 R: 2+0(1.8%) HW:   2/.11%
 ECM 1:       | 368.8/322.4/402.1Mh/s | A: 114 R: 0+0(none) HW:   2/.11%
 ECM 2:       | 207.4/325.8/383.5Mh/s | A: 113 R: 0+0(none) HW:   3/.17%
 ECM 3:       | 318.5/324.5/394.4Mh/s | A: 107 R: 1+0(.95%) HW:   4/.22%
 BPM 0:       |  2.36/ 2.36/ 2.14Gh/s | A: 581 R: 3+0(.52%) HW: 408/4.0%
 BPM 1:       |  2.35/ 2.35/ 2.11Gh/s | A: 592 R: 5+0(.85%) HW: 403/4.0%
 BPM 2:       |  2.39/ 2.39/ 2.26Gh/s | A: 634 R: 6+0(.76%) HW: 400/3.7%
 BPM 3:       |  2.31/ 2.32/ 2.16Gh/s | A: 588 R: 5+0(.87%) HW: 558/5.3%
 ZTX 0:       | 226.1/225.9/216.3Mh/s | A:  48 R: 0+0(none) HW: 208/.30%
 BES 0:       | 335.7/335.4/326.8Mh/s | A:  83 R: 1+0(1.2%) HW:   7/.46%
 BES 1:       | 335.3/335.3/329.9Mh/s | A: 105 R: 0+0(none) HW:   5/.33%
 BES 2:       | 335.7/334.7/329.3Mh/s | A:  79 R: 0+0(none) HW:   6/.40%
 BES 3:       | 335.8/335.2/332.1Mh/s | A: 106 R: 0+0(none) HW:  13/.85%
 BES 4:       | 335.7/334.9/335.9Mh/s | A:  96 R: 0+0(none) HW:   1/.07%
 BES 5:       | 335.5/334.9/346.6Mh/s | A: 109 R: 0+0(none) HW:   6/.38%
 BES 6:       | 335.6/334.6/331.9Mh/s | A:  87 R: 0+0(none) HW:  15/.98%
 BES 7:       | 335.5/335.0/326.4Mh/s | A:  90 R: 0+0(none) HW:  11/.73%
 BES 8:       | 335.3/334.9/334.0Mh/s | A: 100 R: 1+0(1.0%) HW:   5/.32%
 BES 9:       | 335.2/335.2/348.4Mh/s | A:  97 R: 0+0(none) HW:  11/.69%
 BES10:       | 335.6/335.2/323.8Mh/s | A:  91 R: 0+0(none) HW:   7/.47%
 BES11:       | 335.6/334.8/335.7Mh/s | A: 100 R: 1+0(1.0%) HW:   6/.39%
 BES12:       | 335.6/334.9/354.5Mh/s | A:  96 R: 0+0(none) HW:  14/.87%
 BES13:       | 335.7/335.0/343.0Mh/s | A:  83 R: 0+0(none) HW:  14/.90%
 BES14:       | 335.2/334.9/327.6Mh/s | A:  95 R: 0+0(none) HW:   7/.47%
 BEE 0:       | 335.6/334.9/334.5Mh/s | A:  85 R: 0+0(none) HW:   9/.59%
hero member
Activity: 714
Merit: 601
Good to see they're all showing up slowly Cheesy
member
Activity: 61
Merit: 10
Units received and hashing happily (no need for tracking nr anymore Wink )

Had some problem with a 7 port dlink hub, so running straight from the pc atm.
jml
full member
Activity: 238
Merit: 100
Mine co-exist no problem.

Are you using the same devices as I am?
full member
Activity: 229
Merit: 100
Confirmed received all my ordered units albeit in a round a bout fashion.
hero member
Activity: 734
Merit: 500
Does anyone know who is parcel forces german partner?
hero member
Activity: 686
Merit: 500
WANTED: Active dev to fix & re-write p2pool in C
Mine co-exist no problem.
jml
full member
Activity: 238
Merit: 100
I have them already installed and hashing.

I have made a couple of observations:

1) I am using D-Link 7 hub USB ports and only manage to detect 2 at a time although I can fit 4. Max amp rated of USB hub is 3Amp and each stick "should" draw 500mA.

2) They can't co-exist with ASICMiner USB block erupters within the same hub; they need to be isolated on a different hub.

During a 50 minute period of having a cluster f*ck of FPGA's and ASIC's running in harmony with a Pi running debian Wheezy, the blue fury's is at the moment hashing between 2.0GH/s and 2.2GH/s.
hero member
Activity: 2576
Merit: 883
Freebitco.in Support https://bit.ly/2I9BVS2
Can I use BitMinter to run this device, or do I have to use bfgminer?

The latest beta is supposed to support them but I tried and it didn't work  Sad
hero member
Activity: 560
Merit: 500
Can I use BitMinter to run this device, or do I have to use bfgminer?
hero member
Activity: 1246
Merit: 501
OK, so I picked up my Blue Fury from the Post Office this morning, but I'm having difficulty installing it. Can some kind person give me a link to the best drivers for Windows 7, mining with BitMinter.

I didn't need any drivers on Windows 8.1 or on OSX. 

On Windows 8.1 I just did the usual WinUSB bullshit and fired up cgminer 3.8.1 and away it went.  Running 2x BlueFuzzies and a lonely Block Erupter off the same Anker hub and same cgminer instance.

On OSX I used bfgminer 3.5.1 and it worked straight off.
full member
Activity: 216
Merit: 100
OK, so I picked up my Blue Fury from the Post Office this morning, but I'm having difficulty installing it. Can some kind person give me a link to the best drivers for Windows 7, mining with BitMinter.

download bfgminer 3.5.1 that's what im using now. with the latest cgminer. the miners were underperforming
and I was getting some zombie state for one of the miners. and another miner was stuck at 550mhz

testing out bfgminer now
hero member
Activity: 560
Merit: 500
OK, so I picked up my Blue Fury from the Post Office this morning, but I'm having difficulty installing it. Can some kind person give me a link to the best drivers for Windows 7, mining with BitMinter.

I had to upgrade bfgminer to 3.5.1 to get mine to work on Windows 7.

http://luke.dashjr.org/programs/bitcoin/files/bfgminer/

edit: and for some reason the drivers folder is encrypted. So you need to go in to explorer, right click the folder, properties, advanced and deselect that.

Yes, it was the encrypted files that were the problem. I had wondered why they showed up in green in Explorer. Thanks
hero member
Activity: 2576
Merit: 883
Freebitco.in Support https://bit.ly/2I9BVS2
OK, so I picked up my Blue Fury from the Post Office this morning, but I'm having difficulty installing it. Can some kind person give me a link to the best drivers for Windows 7, mining with BitMinter.

I had to upgrade bfgminer to 3.5.1 to get mine to work on Windows 7.

http://luke.dashjr.org/programs/bitcoin/files/bfgminer/

edit: and for some reason the drivers folder is encrypted. So you need to go in to explorer, right click the folder, properties, advanced and deselect that.
hero member
Activity: 714
Merit: 601
OK, so I picked up my Blue Fury from the Post Office this morning, but I'm having difficulty installing it. Can some kind person give me a link to the best drivers for Windows 7, mining with BitMinter.

Check over this page https://bitcointalksearch.org/topic/blue-fury-support-thread-319419

Will add it to the original post now.
hero member
Activity: 560
Merit: 500
OK, so I picked up my Blue Fury from the Post Office this morning, but I'm having difficulty installing it. Can some kind person give me a link to the best drivers for Windows 7, mining with BitMinter.
hero member
Activity: 714
Merit: 601
hi outcast

i am sure you are quite busy but if you get a moment perhaps you can send me my compensation.

i have pm'd you

thank you

Hey,

You and the couple of other people who didn't provide a compensation/refund address will have it sent to them by this evening, sorry for the delay.
hero member
Activity: 1246
Merit: 501
These little things do work well - I'm down to the two Blades, two BlueFuzzies and a lonely Block Erupter. Cheesy  And 10GH-20GH on cex.io depending on Referrals.

Think I've got about 50GH mining now on a good day.  Grin
hero member
Activity: 868
Merit: 1000
I've been looking at my returns over the weekend.

The BlueFury must be one of the most efficient devices currently on sale. It's a shame its also expensive.

                running cost          price
BlueFury    1.09 Watts/Gh       £39.01/Gh (av over 8 sticks)

RedFury    1.09 Watts/Gh       £32.13/Gh  (av over 8 sticks)

Chili          5.83 Watts/Gh       £16.02/Gh

Erupter      7.61 Watts/Gh       £35.82/Gh (todays price)
hero member
Activity: 714
Merit: 601
@Jamievs @jn77 @bitbar your tracking codes have been resent manually.

It seems my mass mailer, had quite a few bounce backs, not sure why. If you didn't receive your tracking number, and want it, please drop me a PM Smiley
Pages:
Jump to: