EWBF's CUDA Zcash miner - page 27. | Bitcointalksearch.org

Precision

member

Activity: 94

Merit: 10

Quote from: crypper on December 12, 2017, 04:15:34 PM

Quote from: Precision on December 12, 2017, 03:48:29 PM

My miner has been working fine for months but all of a sudden I get this:

ERROR: Incorrect stratum user: ""
ERROR: No properly configured pool!

The information in the bat file has always been the same. I'm not sure why the miner isn't reading it this time. I have the latest version of the miner.

Anybody else having these issues?

Would be greatly appreciated if someone can give an input.

Thanks!

hack? pool problem?
share your config maybe

I don't think it's a hack or pool problem. I have 2 other rigs with the same config and they connect with the pool. I figured there is something wrong with the software and how it communicates to windows 10. I've reinstalled the miner and same problem persists. I added "pause" on the next line so I could see those error messages.

crypper

member

Activity: 239

Merit: 12

Quote from: Precision on December 12, 2017, 03:48:29 PM

My miner has been working fine for months but all of a sudden I get this:

ERROR: Incorrect stratum user: ""
ERROR: No properly configured pool!

The information in the bat file has always been the same. I'm not sure why the miner isn't reading it this time. I have the latest version of the miner.

Anybody else having these issues?

Would be greatly appreciated if someone can give an input.

Thanks!

hack? pool problem?
share your config maybe

Precision

member

Activity: 94

Merit: 10

My miner has been working fine for months but all of a sudden I get this:

ERROR: Incorrect stratum user: ""
ERROR: No properly configured pool!

The information in the bat file has always been the same. I'm not sure why the miner isn't reading it this time. I have the latest version of the miner.

Anybody else having these issues?

Would be greatly appreciated if someone can give an input.

Thanks!

m1n1ngP4d4w4n

full member

Activity: 224

Merit: 100

CryptoLearner

Quote from: niceacrobtc on December 12, 2017, 06:11:55 AM

Quote from: m1n1ngP4d4w4n on December 12, 2017, 04:37:07 AM

How about you take the 2mn that took you to ask the question and read the main page of the pool and your account page ? it's all explained...

Because i went there et didn't see those informations... Roll Eyes

as a guest so i think i have to register to know this information..
Soooo i prefered to ask to this community before register...

Sorry for inconvenience and sorry to ask some questions in a thread about questions...

Asking a question is fine as long as you did your job really looking around... and you didn't Roll Eyes

No need to be registered for...

https://btg.suprnova.cc/index.php?page=tac

Code:

The Pool rewards miners according to a PPLNS system with 1% fee. The fee may change at any time, but notice will be given before doing so. Any fee change will be communicated through the pools news page.

To know the minimum payout, you have to create an account, but i guess it's easier to spend 2mn writing a question to be spoonfed the answer, than register and discover the information yourself from your account page... Huh

Code:

0.001 - 8000 BTG. Set to '0' for no auto payout. A 0.0001 BTG TX fee will apply

niceacrobtc

member

Activity: 110

Merit: 10

Quote from: m1n1ngP4d4w4n on December 12, 2017, 04:37:07 AM

How about you take the 2mn that took you to ask the question and read the main page of the pool and your account page ? it's all explained...

Because i went there et didn't see those informations... Roll Eyes

as a guest so i think i have to register to know this information..
Soooo i prefered to ask to this community before register...

Sorry for inconvenience and sorry to ask some questions in a thread about questions...

m1n1ngP4d4w4n

full member

Activity: 224

Merit: 100

CryptoLearner

How about you take the 2mn that took you to ask the question and read the main page of the pool and your account page ? it's all explained...

niceacrobtc

member

Activity: 110

Merit: 10

Quote from: sublimus on December 11, 2017, 02:19:44 PM

Quote from: niceacrobtc on December 11, 2017, 12:37:30 PM

Quote from: sublimus on December 11, 2017, 11:26:23 AM

Quote from: niceacrobtc on December 11, 2017, 04:25:03 AM

Hello every body,

Just have finished my new RIG 6x Geforce 1070 gigabyte 8gb OC edition...

Have installed Simple Mining OS to mine ETH...

MHS are not interresting to me (below 25 MH/s with claymore) I would like to try EWBF to mine BTG..

Can someone give me some information about Pools, configuration etc.. ?

Thanks for help

open account on btg.suprnova.cc
setup a worker

.bat
miner --server btg.suprnova.cc --port 8816 --user account.rigname --pass RigPassword

ok thanks,

Fees ? Payout ?

Fees ? = yes
Payout ? = yes

Roll Eyes

Lol thanks, but i meant, how much are the fees, and what is the min Payout amount

jpl

member

Activity: 154

Merit: 11

Apples to Lettuce comparison.

Thank you.

dreamlikestate

newbie

Activity: 3

Merit: 0

Quote from: pubix on December 11, 2017, 03:52:08 PM

Can you paste your .bat file here, maybe we'll find an answer sooner.

Quote from: .m. on December 11, 2017, 03:55:48 PM

first what comes when Google asked

https://hashcat.net/forum/thread-3459.html

any details about your system ? MB,CPU,OS,GPU ?

Running a Linux system so I am using a .sh file to start the miner:

Code:

sudo ./miner --server us1-zcash.flypool.org --user  --pass x --port 3333 --cuda_devices 0 1 2 3

Figured I'd tinker around with this before investing into some decent GPU's, so I am testing the miner with an old machine and fresh OS... (don't laugh Grin

) Core2 Quad Nvidia Geforce 7100/630i Driver: 304.137 Linux Mint 18.2.

orddie1

newbie

Activity: 14

Merit: 0

Quote from: Spitshinetommy on December 11, 2017, 06:15:39 PM

My latest version of EWBF miner is failing to start on a fresh install of windows. I'm new round here so any help regarding info I should post to try and get this running would be great. I have this running on my main Pc but it fail s to run on my new mining rig.

I'm in the process of reading this post from the beginning.

Thanks in advance.

need more info.. where are you stuck and what error are you getting?

Spitshinetommy

newbie

Activity: 3

Merit: 0

My latest version of EWBF miner is failing to start on a fresh install of windows. I'm new round here so any help regarding info I should post to try and get this running would be great. I have this running on my main Pc but it fail s to run on my new mining rig.

I'm in the process of reading this post from the beginning.

Thanks in advance.

.m.

sr. member

Activity: 280

Merit: 260

first what comes when Google asked

https://hashcat.net/forum/thread-3459.html

any details about your system ? MB,CPU,OS,GPU ?

pubix

member

Activity: 154

Merit: 10

Quote from: dreamlikestate on December 11, 2017, 03:39:33 PM

I am close to getting this up and running, I just need to figure out how to fix this error:

Code:

+-------------------------------------------------+
|         EWBF's Zcash CUDA miner. 0.3.4b         |
+-------------------------------------------------+
INFO: Current pool: us1-zcash.flypool.org:3333
INFO: Selected pools: 1
INFO: Solver: Auto.
INFO: Devices: User defined.
INFO: Temperature limit: 90
INFO: Api: Disabled
---------------------------------------------------
./miner: symbol lookup error: ./miner: undefined symbol: nvmlInit_v2

Any ideas on how to correct this?

Can you paste your .bat file here, maybe we'll find an answer sooner.

dreamlikestate

newbie

Activity: 3

Merit: 0

I am close to getting this up and running, I just need to figure out how to fix this error:

Code:

+-------------------------------------------------+
|         EWBF's Zcash CUDA miner. 0.3.4b         |
+-------------------------------------------------+
INFO: Current pool: us1-zcash.flypool.org:3333
INFO: Selected pools: 1
INFO: Solver: Auto.
INFO: Devices: User defined.
INFO: Temperature limit: 90
INFO: Api: Disabled
---------------------------------------------------
./miner: symbol lookup error: ./miner: undefined symbol: nvmlInit_v2

Any ideas on how to correct this?

sublimus

full member

Activity: 240

Merit: 100

Quote from: niceacrobtc on December 11, 2017, 12:37:30 PM

Quote from: sublimus on December 11, 2017, 11:26:23 AM

Quote from: niceacrobtc on December 11, 2017, 04:25:03 AM

Hello every body,

Just have finished my new RIG 6x Geforce 1070 gigabyte 8gb OC edition...

Have installed Simple Mining OS to mine ETH...

MHS are not interresting to me (below 25 MH/s with claymore) I would like to try EWBF to mine BTG..

Can someone give me some information about Pools, configuration etc.. ?

Thanks for help

open account on btg.suprnova.cc
setup a worker

.bat
miner --server btg.suprnova.cc --port 8816 --user account.rigname --pass RigPassword

ok thanks,

Fees ? Payout ?

Fees ? = yes
Payout ? = yes

Roll Eyes

niceacrobtc

member

Activity: 110

Merit: 10

Quote from: sublimus on December 11, 2017, 11:26:23 AM

Quote from: niceacrobtc on December 11, 2017, 04:25:03 AM

Hello every body,

Just have finished my new RIG 6x Geforce 1070 gigabyte 8gb OC edition...

Have installed Simple Mining OS to mine ETH...

MHS are not interresting to me (below 25 MH/s with claymore) I would like to try EWBF to mine BTG..

Can someone give me some information about Pools, configuration etc.. ?

Thanks for help

open account on btg.suprnova.cc
setup a worker

.bat
miner --server btg.suprnova.cc --port 8816 --user account.rigname --pass RigPassword

ok thanks,

Fees ? Payout ?

sublimus

full member

Activity: 240

Merit: 100

Quote from: niceacrobtc on December 11, 2017, 04:25:03 AM

Hello every body,

Just have finished my new RIG 6x Geforce 1070 gigabyte 8gb OC edition...

Have installed Simple Mining OS to mine ETH...

MHS are not interresting to me (below 25 MH/s with claymore) I would like to try EWBF to mine BTG..

Can someone give me some information about Pools, configuration etc.. ?

Thanks for help

open account on btg.suprnova.cc
setup a worker

.bat
miner --server btg.suprnova.cc --port 8816 --user account.rigname --pass RigPassword

niceacrobtc

member

Activity: 110

Merit: 10

Hello every body,

Just have finished my new RIG 6x Geforce 1070 gigabyte 8gb OC edition...

Have installed Simple Mining OS to mine ETH...

MHS are not interresting to me (below 25 MH/s with claymore) I would like to try EWBF to mine BTG..

Can someone give me some information about Pools, configuration etc.. ?

Thanks for help

SickBeast

newbie

Activity: 38

Merit: 0

Have any of you guys found a way to set the intensity with the EWBF miner for Bitcoin Gold? I have used the --intensity option but it's having no effect, it's always running my cards full tilt. Thoughts?

timbereagle

hero member

Activity: 881

Merit: 502

Quote from: shibob on December 09, 2017, 09:45:39 PM

Quote from: timbereagle on December 09, 2017, 05:54:13 AM

I recently switch to DSTM's miner. it is %2-3 faster on gtx 1060s.

I hope EWBF comes back and update his miner. I really like it but nowadays every %2-3 counts.

DSTM's miner is faster but it seems not stable for my rigs. The miner was unexpected closed by window sometime while EWBF's miner could run in a month without any problem.

I am using SMOS, also tried windows and did not have any stability issues.

Anyway I also prefer normally EWBF but he needs to update and add some speed.

Topic: EWBF's CUDA Zcash miner - page 27. (Read 2164326 times)