EWBF's CUDA Zcash miner - page 281. | Bitcointalksearch.org

bensam1231

legendary

Activity: 1764

Merit: 1024

Quote from: Amph on December 09, 2016, 02:05:20 AM

Quote from: m1n1ngP4d4w4n on December 08, 2016, 03:52:35 PM

Hey,

Very nice miner, work out pretty good.

6 x GTX 1070 EVGA FTW @1800:4400 / +30% vcore / 50% PowerLimit (690W on wall about 100w per card) / ~260sols per card.

Pretty stable, switched to 0.0.3b as soon as you published, but it crashed twice after a moment, rebooted to be sure, running it now.

Using dwarfpool - W10 AE x64 - Nvidia 375.70

Features request

- restart/watchdog demon
- Linux release (asked alot lol)
- Remote console (i noticed a --port 3333 in example bat files what's it's for ?)
- logging
- -h option to know the switchs
- how to add a worker/email
- pretty much everything that's trendy now (intensity, per gpu settings, temps)

Keep up the good work, very nice job

EDIT : After a few more try, the 0.0.3b really crashes alot, rollbacked to 0.0.2b

how can you reach 1800 core with only 50% tdp, when i'm at 1720 with 55%? it's because you increase the voltage? what is the voltage that is displayed?

BTW OP is this miner based on clymore, i see the same color and scheme for the hashing display...

All chips aren't created equal. They use different amounts of power to hit the same clocks. That's why listing your TDP is never comparable between cards even of the same make and model. Memory packages can also use less.

That being said FTW cards have a 6+8 pin power cluster, they can consume up to 240w. When the total TDP is different, you once again can't compare between different models from different manufacturers. TDP is different for lots of different cards, even on the same card and model it's a different number depending on the silicon.

Hey look this font is red, I must've copied code somewhere.

That being said I've almost gotten no crashes in .3b minus some OC issues. I'm pretty sure people aren't monitoring their GPUs. .2b silently crashed sometimes and it would look like it's doing work, when it's not. Reallllly big bug. I'm sure the mining elite is on the job though.

kondiomir

legendary

Activity: 1568

Merit: 1000

Twitter @Acimirov

Quote from: bucketofsocks on December 08, 2016, 06:39:23 AM

on my 5x1070 rig gpu 0 is stuck at 80sols, all the others are way over 200, clocks and power settings are identical on all cards, any ideas?

My friend have the same strange problem.. Anyone solve it ?

Amph

legendary

Activity: 3248

Merit: 1070

Quote from: m1n1ngP4d4w4n on December 08, 2016, 03:52:35 PM

Hey,

Very nice miner, work out pretty good.

6 x GTX 1070 EVGA FTW @1800:4400 / +30% vcore / 50% PowerLimit (690W on wall about 100w per card) / ~260sols per card.

Pretty stable, switched to 0.0.3b as soon as you published, but it crashed twice after a moment, rebooted to be sure, running it now.

Using dwarfpool - W10 AE x64 - Nvidia 375.70

Features request

- restart/watchdog demon
- Linux release (asked alot lol)
- Remote console (i noticed a --port 3333 in example bat files what's it's for ?)
- logging
- -h option to know the switchs
- how to add a worker/email
- pretty much everything that's trendy now (intensity, per gpu settings, temps)

Keep up the good work, very nice job

EDIT : After a few more try, the 0.0.3b really crashes alot, rollbacked to 0.0.2b

how can you reach 1800 core with only 50% tdp, when i'm at 1720 with 55%? it's because you increase the voltage? what is the voltage that is displayed?

BTW OP is this miner based on clymore, i see the same color and scheme for the hashing display...

ryen123

sr. member

Activity: 292

Merit: 250

v0.0.3b seems good no more share rejects.
#Win10x64 #Driver376.09

m1n1ngP4d4w4n

full member

Activity: 224

Merit: 100

CryptoLearner

Quote from: bensam1231 on December 09, 2016, 12:44:45 AM

Looks like stability on 0.3b is quite a bit better then earlier versions.

Curiously is there anyway you can check whether or not this miner is OCL or CUDA?

I would be surprised for it to be OpenCL, CUDA algo always work alot better on nvidia cards than OpenCL.

Nvidia SMI

Code:


C:\Program Files\NVIDIA Corporation\NVSMI>nvidia-smi
Fri Dec 09 07:09:02 2016
+-----------------------------------------------------------------------------+
| NVIDIA-SMI 375.70                 Driver Version: 375.70                    |
|-------------------------------+----------------------+----------------------+
| GPU  Name            TCC/WDDM | Bus-Id        Disp.A | Volatile Uncorr. ECC |
| Fan  Temp  Perf  Pwr:Usage/Cap|         Memory-Usage | GPU-Util  Compute M. |
|===============================+======================+======================|
|   0  GeForce GTX 1070   WDDM  | 0000:01:00.0     Off |                  N/A |
|  0%   48C    P2    70W /  92W |    869MiB /  8192MiB |     96%      Default |
+-------------------------------+----------------------+----------------------+
|   1  GeForce GTX 1070   WDDM  | 0000:02:00.0     Off |                  N/A |
|  0%   51C    P2    90W /  92W |    766MiB /  8192MiB |     95%      Default |
+-------------------------------+----------------------+----------------------+
|   2  GeForce GTX 1070   WDDM  | 0000:03:00.0     Off |                  N/A |
|  6%   55C    P2    90W /  92W |    766MiB /  8192MiB |     95%      Default |
+-------------------------------+----------------------+----------------------+
|   3  GeForce GTX 1070   WDDM  | 0000:04:00.0     Off |                  N/A |
|  4%   54C    P2    91W /  92W |    766MiB /  8192MiB |     93%      Default |
+-------------------------------+----------------------+----------------------+
|   4  GeForce GTX 1070   WDDM  | 0000:05:00.0     Off |                  N/A |
|  0%   48C    P2    94W /  92W |    766MiB /  8192MiB |     90%      Default |
+-------------------------------+----------------------+----------------------+
|   5  GeForce GTX 1070   WDDM  | 0000:06:00.0     Off |                  N/A |
|  3%   53C    P2    91W /  92W |    766MiB /  8192MiB |     93%      Default |
+-------------------------------+----------------------+----------------------+

+-----------------------------------------------------------------------------+
| Processes:                                                       GPU Memory |
|  GPU       PID  Type  Process name                               Usage      |
|=============================================================================|
|    0      3580    C   C:\MINING\ZecMiner\miner.exe                 N/A      |
|    1      3580    C   C:\MINING\ZecMiner\miner.exe                 N/A      |
|    2      3580    C   C:\MINING\ZecMiner\miner.exe                 N/A      |
|    3      3580    C   C:\MINING\ZecMiner\miner.exe                 N/A      |
|    4      3580    C   C:\MINING\ZecMiner\miner.exe                 N/A      |
|    5      3580    C   C:\MINING\ZecMiner\miner.exe                 N/A      |
+-----------------------------------------------------------------------------+

As you can see it's cuda-based Wink

(little C in the type column), also dev say so in his topic title

Quote from: tbearhere on December 08, 2016, 08:19:02 PM

Quote from: m1n1ngP4d4w4n on December 08, 2016, 03:52:35 PM

Hey,

Very nice miner, work out pretty good.

6 x GTX 1070 EVGA FTW @1800:4400 / +30% vcore / 50% PowerLimit (690W on wall about 100w per card) / ~260sols per card.

Pretty stable, switched to 0.0.3b as soon as you published, but it crashed twice after a moment, rebooted to be sure, running it now.

Using dwarfpool - W10 AE x64 - Nvidia 375.70

Features request

- restart/watchdog demon
- Linux release (asked alot lol)
- Remote console (i noticed a --port 3333 in example bat files what's it's for ?)
- logging
- -h option to know the switchs
- how to add a worker/email
- pretty much everything that's trendy now (intensity, per gpu settings, temps)

Keep up the good work, very nice job

EDIT : After a few more try, the 0.0.3b really crashes alot, rollbacked to 0.0.2b

Hi I don't see where you can add command -h and intensity. Is the intensity command -i ? Thx

they can be added as switch for the program, miner.exe -h would give the help with the list of switch & how to use etc..., -i or -mi could be intensity and so on, could take examples on current other miners

bensam1231

legendary

Activity: 1764

Merit: 1024

Looks like stability on 0.3b is quite a bit better then earlier versions.

Curiously is there anyway you can check whether or not this miner is OCL or CUDA?

induktor

hero member

Activity: 710

Merit: 502

Quote from: liomojo1 on December 08, 2016, 03:46:41 PM

Anyone on a WiFi connection, My router freezes after an hour or two after mining and the only new thing is this miner! What could be the issue? It was working for months ok?

try disable UPNP on the router, most home router's UPNP implementations are beyond bad

blzflkn

newbie

Activity: 53

Merit: 0

I'm pulling in 12 sol/s on a gt 730, compute 3.5

All I can say is, thank you so very much for making it possible to mine this; all other Zcash miners wouldn't work on my card in cuda mode. I was only able to get them working in open CL, doing a pathetic 1-2 sol/s.

Huge shame that this wasn't out when earnings would have been decent, but massive thanks still for giving older cards like mine something to work with finally.

tbearhere

legendary

Activity: 3164

Merit: 1003

Quote from: m1n1ngP4d4w4n on December 08, 2016, 03:52:35 PM

Hey,

Very nice miner, work out pretty good.

6 x GTX 1070 EVGA FTW @1800:4400 / +30% vcore / 50% PowerLimit (690W on wall about 100w per card) / ~260sols per card.

Pretty stable, switched to 0.0.3b as soon as you published, but it crashed twice after a moment, rebooted to be sure, running it now.

Using dwarfpool - W10 AE x64 - Nvidia 375.70

Features request

- restart/watchdog demon
- Linux release (asked alot lol)
- Remote console (i noticed a --port 3333 in example bat files what's it's for ?)
- logging
- -h option to know the switchs
- how to add a worker/email
- pretty much everything that's trendy now (intensity, per gpu settings, temps)

Keep up the good work, very nice job

EDIT : After a few more try, the 0.0.3b really crashes alot, rollbacked to 0.0.2b

Hi I don't see where you can add command -h and intensity. Is the intensity command -i ? Thx

tbearhere

legendary

Activity: 3164

Merit: 1003

Quote from: rednoW on December 08, 2016, 01:32:33 PM

Quote from: Amph on December 08, 2016, 12:27:25 PM

Quote from: Kompik on December 08, 2016, 12:20:50 PM

Quote from: Amph on December 08, 2016, 12:18:27 PM

Quote from: Kompik on December 08, 2016, 12:14:53 PM

Quote from: Amph on December 08, 2016, 08:50:30 AM

with the 2 instances trick, 1700 core, 4300 mem, 55 tdp, i get 255 sol per gpu(1070) at 700 watt total, whole system with 3 fan 14mm, each gpu is hashing at 100watt

fucking efficient above 2:1 ratio

How do you get 1700 core at such low TDP? My card always falls to 1550 with high OC.

your core is set at +120?

+196. With more OC the card starts to be unstable. Also for me it does not seem that three instances do better than two

yeah same, 3 is not better than two, it's worse or on par at best

dunno about the core maybe it's because of the model, i have g1 gaming

I think it depends on what cpu you have. With powerful cpu it can be good enough to run 2 instances but I have lousy Athlon x2 socket am2))

Yes..I have some 750ti's and on a 2 core I get 25 s/s...on a 4 core I get 50 s/s.
I think he can get it up to 65 s/s.

reelen

full member

Activity: 189

Merit: 100

Getting 300~ sols with GTX 1080, not a crash in 4+ hours.

tbearhere

legendary

Activity: 3164

Merit: 1003

Quote from: Amph on December 08, 2016, 08:50:30 AM

with the 2 instances trick, 1700 core, 4300 mem, 55 tdp, i get 255 sol per gpu(1070) at 700 watt total, whole system with 3 fan 14mm, each gpu is hashing at 100watt

fucking efficient above 2:1 ratio

I'm getting 270 s/s on my 1070 75% tdp... mem +400...core 1950.

Amph are you talking about 2 instances with 1 worker or 2 with separate workers?

jiggytom

legendary

Activity: 1068

Merit: 1020

Can you slowly initialize the GPUs when starting the miner? I have a rig that craps out immediately when I run the miner, right after boot. But if i run a different miner (LBRY cuda miner) for a minute, and then turn yours on, it works.

xxcsu

hero member

Activity: 1498

Merit: 597

Quote from: EWBF_ on December 08, 2016, 01:34:50 PM

Version 0.0.3b released.
Fixed some situations where a miner stopped, and did not do anything

it would be great if you can post all the update information , change logs with dates in your first post of this topic

Kompik

sr. member

Activity: 463

Merit: 250

Quote from: topgeek on December 08, 2016, 05:14:08 PM

EW: with the new version 0.3:

GTX1080 ran about 2 hours and then:

This is what happened to me with 0.2 version, but now it works fine for quite long hours.

topgeek

member

Activity: 96

Merit: 10

EW: with the new version 0.3:

GTX1080 ran about 2 hours and then:

Kompik

sr. member

Activity: 463

Merit: 250

Quote from: m1n1ngP4d4w4n on December 08, 2016, 04:29:58 PM

Quote from: Kompik on December 08, 2016, 04:22:55 PM

Quote from: m1n1ngP4d4w4n on December 08, 2016, 03:52:35 PM

Hey,

Very nice miner, work out pretty good.

6 x GTX 1070 EVGA FTW @1800:4400 / +30% vcore / 50% PowerLimit (690W on wall about 100w per card) / ~260sols per card.

Pretty stable, switched to 0.0.3b as soon as you published, but it crashed twice after a moment, rebooted to be sure, running it now.

Using dwarfpool - W10 AE x64 - Nvidia 375.70

Features request

- restart/watchdog demon
- Linux release (asked alot lol)
- Remote console (i noticed a --port 3333 in example bat files what's it's for ?)
- logging
- -h option to know the switchs
- how to add a worker/email
- pretty much everything that's trendy now (intensity, per gpu settings, temps)

Keep up the good work, very nice job

EDIT : After a few more try, the 0.0.3b really crashes alot, rollbacked to 0.0.2b

How do you change the Vcore with EVGA card?

I have tried all kinds of versions of software and it is locked everywhere. Once i go TDP under 55% i cannot go over 1600MHZ on the GPU.

Hey

i use MSI afterburner because EVGA tool isn't good and also don't support 6x gpu's only 4x

you can with it either set % of added vcore for stability or do your own vcore curve for stability during automatic throttling of gpu frequency, in afterburner option you have voltage unlock, it'll let you play with them after that

Thanks will try!

m1n1ngP4d4w4n

full member

Activity: 224

Merit: 100

CryptoLearner

Quote from: Kompik on December 08, 2016, 04:22:55 PM

Quote from: m1n1ngP4d4w4n on December 08, 2016, 03:52:35 PM

Hey,

Very nice miner, work out pretty good.

6 x GTX 1070 EVGA FTW @1800:4400 / +30% vcore / 50% PowerLimit (690W on wall about 100w per card) / ~260sols per card.

Pretty stable, switched to 0.0.3b as soon as you published, but it crashed twice after a moment, rebooted to be sure, running it now.

Using dwarfpool - W10 AE x64 - Nvidia 375.70

Features request

- restart/watchdog demon
- Linux release (asked alot lol)
- Remote console (i noticed a --port 3333 in example bat files what's it's for ?)
- logging
- -h option to know the switchs
- how to add a worker/email
- pretty much everything that's trendy now (intensity, per gpu settings, temps)

Keep up the good work, very nice job

EDIT : After a few more try, the 0.0.3b really crashes alot, rollbacked to 0.0.2b

How do you change the Vcore with EVGA card?

I have tried all kinds of versions of software and it is locked everywhere. Once i go TDP under 55% i cannot go over 1600MHZ on the GPU.

Hey

i use MSI afterburner because EVGA tool isn't good and also don't support 6x gpu's only 4x

you can with it either set % of added vcore for stability or do your own vcore curve for stability during automatic throttling of gpu frequency, in afterburner option you have voltage unlock, it'll let you play with them after that

Kompik

sr. member

Activity: 463

Merit: 250

Quote from: m1n1ngP4d4w4n on December 08, 2016, 03:52:35 PM

Hey,

Very nice miner, work out pretty good.

6 x GTX 1070 EVGA FTW @1800:4400 / +30% vcore / 50% PowerLimit (690W on wall about 100w per card) / ~260sols per card.

Pretty stable, switched to 0.0.3b as soon as you published, but it crashed twice after a moment, rebooted to be sure, running it now.

Using dwarfpool - W10 AE x64 - Nvidia 375.70

Features request

- restart/watchdog demon
- Linux release (asked alot lol)
- Remote console (i noticed a --port 3333 in example bat files what's it's for ?)
- logging
- -h option to know the switchs
- how to add a worker/email
- pretty much everything that's trendy now (intensity, per gpu settings, temps)

Keep up the good work, very nice job

EDIT : After a few more try, the 0.0.3b really crashes alot, rollbacked to 0.0.2b

How do you change the Vcore with EVGA card?

I have tried all kinds of versions of software and it is locked everywhere. Once i go TDP under 55% i cannot go over 1600MHZ on the GPU.

lucasan123

full member

Activity: 219

Merit: 100

i'm getting 235 sols with gtx 980 ti but it crashes

Topic: EWBF's CUDA Zcash miner - page 281. (Read 2164327 times)