EWBF's CUDA Zcash miner - page 283. | Bitcointalksearch.org

Kompik

sr. member

Activity: 463

Merit: 250

Quote from: Amph on December 08, 2016, 12:18:27 PM

Quote from: Kompik on December 08, 2016, 12:14:53 PM

Quote from: Amph on December 08, 2016, 08:50:30 AM

with the 2 instances trick, 1700 core, 4300 mem, 55 tdp, i get 255 sol per gpu(1070) at 700 watt total, whole system with 3 fan 14mm, each gpu is hashing at 100watt

fucking efficient above 2:1 ratio

How do you get 1700 core at such low TDP? My card always falls to 1550 with high OC.

your core is set at +120?

+196. With more OC the card starts to be unstable. Also for me it does not seem that three instances do better than two

Amph

legendary

Activity: 3248

Merit: 1070

Quote from: Kompik on December 08, 2016, 12:14:53 PM

Quote from: Amph on December 08, 2016, 08:50:30 AM

with the 2 instances trick, 1700 core, 4300 mem, 55 tdp, i get 255 sol per gpu(1070) at 700 watt total, whole system with 3 fan 14mm, each gpu is hashing at 100watt

fucking efficient above 2:1 ratio

How do you get 1700 core at such low TDP? My card always falls to 1550 with high OC.

your core is set at +120?

Kompik

sr. member

Activity: 463

Merit: 250

Quote from: Amph on December 08, 2016, 08:50:30 AM

with the 2 instances trick, 1700 core, 4300 mem, 55 tdp, i get 255 sol per gpu(1070) at 700 watt total, whole system with 3 fan 14mm, each gpu is hashing at 100watt

fucking efficient above 2:1 ratio

How do you get 1700 core at such low TDP? My card always falls to 1550 with high OC.

Amph

legendary

Activity: 3248

Merit: 1070

Quote from: rednoW on December 08, 2016, 11:22:27 AM

Quote from: Amph on December 08, 2016, 08:50:30 AM

with the 2 instances trick, 1700 core, 4300 mem, 55 tdp, i get 255 sol per gpu(1070) at 700 watt total, whole system with 3 fan 14mm, each gpu is hashing at 100watt

fucking efficient above 2:1 ratio

3 instances trick is even better )) but gpu load never goes above 95% still ...

i was going to try it, but i was wondering that maybe the boost wasn't too high the more instancez you run

jiggytom

legendary

Activity: 1068

Merit: 1020

Quote from: rednoW on December 08, 2016, 11:22:27 AM

Quote from: Amph on December 08, 2016, 08:50:30 AM

with the 2 instances trick, 1700 core, 4300 mem, 55 tdp, i get 255 sol per gpu(1070) at 700 watt total, whole system with 3 fan 14mm, each gpu is hashing at 100watt

fucking efficient above 2:1 ratio

3 instances trick is even better )) but gpu load never goes above 95% still ...

Are you running all the instances on all cards, or 2 2 2?

rednoW

legendary

Activity: 1510

Merit: 1003

Quote from: Amph on December 08, 2016, 08:50:30 AM

with the 2 instances trick, 1700 core, 4300 mem, 55 tdp, i get 255 sol per gpu(1070) at 700 watt total, whole system with 3 fan 14mm, each gpu is hashing at 100watt

fucking efficient above 2:1 ratio

3 instances trick is even better )) but gpu load never goes above 95% still ...

alrami

member

Activity: 92

Merit: 10

Good start and pretty hash,.
Thank you.

my rigs starts rejects after a 10-15 minutes (some times later)
I will look forward for a new version with a bugfix.

ioglnx

sr. member

Activity: 574

Merit: 250

Fighting mob law and inquisition in this forum

Quote from: laik2 on December 08, 2016, 09:32:50 AM

Quote from: ioglnx on December 08, 2016, 06:19:42 AM

Quote from: EWBF_ on December 08, 2016, 06:17:24 AM

Quote from: laik2 on December 08, 2016, 05:44:28 AM

Quote from: EWBF_ on December 08, 2016, 05:24:52 AM

I confirm the problem with stopping miner. Fix will be soon.

Please respond to my query about Linux version. Thank you.

Linux version will be later when i fix current bugs.

You make these lazy dudes a too easy life! You already wrote that 3-4 times before. Its not your fault if they are to dumb or lazy to use the Search or going through the thread.

Is my post in any way insulting you, fellow? Why you have to be so rude for something that you have no clue? I wrote the author PM and I am expecting an answer from him. This was just a reminder about my query. Besides(fix some bugs and then linux) does not provide me with ETA, does it? Please keep calm and be polite.

No not you..why the hell nobody learns to get and follow up the proper way. I just told this other guy you asked already.-.no you get it..is that so hard .. thats all i did not said you annoy me or such. Stop reading anything that isn't there!

laik2

sr. member

Activity: 652

Merit: 266

Quote from: ioglnx on December 08, 2016, 06:19:42 AM

Quote from: EWBF_ on December 08, 2016, 06:17:24 AM

Quote from: laik2 on December 08, 2016, 05:44:28 AM

Quote from: EWBF_ on December 08, 2016, 05:24:52 AM

I confirm the problem with stopping miner. Fix will be soon.

Please respond to my query about Linux version. Thank you.

Linux version will be later when i fix current bugs.

You make these lazy dudes a too easy life! You already wrote that 3-4 times before. Its not your fault if they are to dumb or lazy to use the Search or going through the thread.

Is my post in any way insulting you, fellow? Why you have to be so rude for something that you have no clue? I wrote the author PM and I am expecting an answer from him. This was just a reminder about my query. Besides(fix some bugs and then linux) does not provide me with ETA, does it? Please keep calm and be polite.

jiggytom

legendary

Activity: 1068

Merit: 1020

Please add per gpu controls and possibly intensity. I think I have one problematic gpu but can't figure out which one because the system just locks up upon startup...even when I down clock memory and clock all the way.

For this one rig, I usually have to start my lbry miner, get the cards going a bit, and then close, and start this miner. If I start this miner off the bat, it just locks up.

EWBF_

full member

Activity: 198

Merit: 160

Quote from: jonesskill on December 08, 2016, 07:06:08 AM

Any way to connect this miner on mining rig rentals?

Connect to mining rig rentals is a good idea. Right now this is not work but i make this possible in future versions.

Amph

legendary

Activity: 3248

Merit: 1070

with the 2 instances trick, 1700 core, 4300 mem, 55 tdp, i get 255 sol per gpu(1070) at 700 watt total, whole system with 3 fan 14mm, each gpu is hashing at 100watt

fucking efficient above 2:1 ratio

ioglnx

sr. member

Activity: 574

Merit: 250

Fighting mob law and inquisition in this forum

He answered just a few posts later ..oh buddha please let it rain eyes, brains and the will to find information ... but yeah i'm here to enlighten even the blindest person.
https://bitcointalksearch.org/topic/m.17110124 for my blind fellow..so please stop asking again and again and again..this makes me really sick don't be lazy do gather the information yourself..i'm not your mommy.

ZenFr

legendary

Activity: 1260

Merit: 1046

Quote from: ioglnx on December 08, 2016, 06:36:58 AM

Quote from: ZenFr on December 08, 2016, 06:23:37 AM

Quote from: ioglnx on December 08, 2016, 06:16:15 AM

Quote from: laik2 on December 08, 2016, 05:44:28 AM

Quote from: EWBF_ on December 08, 2016, 05:24:52 AM

I confirm the problem with stopping miner. Fix will be soon.

Please respond to my query about Linux version. Thank you.

Just read the thread your question has been answered already be some question of the same nature. Don't be lazy man.

I read all the thead and can't find any answer.
The first reply to this question is after your post.

Are you blind?
Post 26 2nd page of this thread..maybe buddha should give you 3rd eye?
https://bitcointalksearch.org/topic/m.17109141

That is that I said.
Your link is for the question, not the answer : first answer was after you post.

Not very important : yet we have the answer :-).

jonesskill

member

Activity: 83

Merit: 10

Any way to connect this miner on mining rig rentals?

richx

newbie

Activity: 25

Merit: 0

Quote from: bucketofsocks on December 08, 2016, 06:39:23 AM

on my 5x1070 rig gpu 0 is stuck at 80sols, all the others are way over 200, clocks and power settings are identical on all cards, any ideas?

close all other programs will be ok. don't use "windows remote desktop".

bucketofsocks

member

Activity: 83

Merit: 11

on my 5x1070 rig gpu 0 is stuck at 80sols, all the others are way over 200, clocks and power settings are identical on all cards, any ideas?

ioglnx

sr. member

Activity: 574

Merit: 250

Fighting mob law and inquisition in this forum

Quote from: ZenFr on December 08, 2016, 06:23:37 AM

Quote from: ioglnx on December 08, 2016, 06:16:15 AM

Quote from: laik2 on December 08, 2016, 05:44:28 AM

Quote from: EWBF_ on December 08, 2016, 05:24:52 AM

I confirm the problem with stopping miner. Fix will be soon.

Please respond to my query about Linux version. Thank you.

Just read the thread your question has been answered already be some question of the same nature. Don't be lazy man.

I read all the thead and can't find any answer.
The first reply to this question is after your post.

Are you blind?
Post 26 2nd page of this thread..maybe buddha should give you 3rd eye?
https://bitcointalksearch.org/topic/m.17109141

dafyk

newbie

Activity: 7

Merit: 0

Is it possible to set custom threads/blocks vlaues like in nheqminer or eqm? I am getting 28sol from old nvidia quadro k620, using eqm miner with 64block and 128threads i am getting 30sol

Lucky - Luciano

hero member

Activity: 711

Merit: 500

Quote from: obmen.es on December 08, 2016, 12:32:01 AM

miner write - "lost connection with server. Try reconnect"

a not recconected - very bad!!!

Same with me.

Topic: EWBF's CUDA Zcash miner - page 283. (Read 2164327 times)