EWBF's CUDA Zcash miner - page 62. | Bitcointalksearch.org

Temporel

full member

Activity: 224

Merit: 100

Quote from: fabry1999 on September 27, 2017, 09:27:26 AM

Quote from: Temporel on September 27, 2017, 08:57:39 AM

Quote from: fabry1999 on September 27, 2017, 08:49:15 AM

I have one of my 7 GTX1070 that perform really bad about 270 H/s less than other GTX1060 that I have, do you know what could be the reason ?

the OC parameters are the same for all other GTX1070 that are between 370 and 430 H/s

what do you get for this GPU if you dont OC it ? If you still get 270, try switching it to another riser and cables.

If I don't OC the card is about the same hashrate 260, could be the riser card the problem ? not the GPU ?

could be a problem on PCI-e supply ? I use one cable from PSU to connect 3 USB RIser card

maybe a defect riser or one of the cables. Worth a shot to try.

matmator

sr. member

Activity: 487

Merit: 252

bou !

you put this command in the .bat? --api 127.0.0.1:42000?

MATHReX

sr. member

Activity: 861

Merit: 281

I've tried any and every IP configuration to get API work but all the time, it is displaying API: DISABLED after running miner. Any solutions to solve this?

fabry1999

full member

Activity: 279

Merit: 100

Quote from: Temporel on September 27, 2017, 08:57:39 AM

Quote from: fabry1999 on September 27, 2017, 08:49:15 AM

I have one of my 7 GTX1070 that perform really bad about 270 H/s less than other GTX1060 that I have, do you know what could be the reason ?

the OC parameters are the same for all other GTX1070 that are between 370 and 430 H/s

what do you get for this GPU if you dont OC it ? If you still get 270, try switching it to another riser and cables.

If I don't OC the card is about the same hashrate 260, could be the riser card the problem ? not the GPU ?

could be a problem on PCI-e supply ? I use one cable from PSU to connect 3 USB RIser card

Temporel

full member

Activity: 224

Merit: 100

Quote from: fabry1999 on September 27, 2017, 08:49:15 AM

I have one of my 7 GTX1070 that perform really bad about 270 H/s less than other GTX1060 that I have, do you know what could be the reason ?

the OC parameters are the same for all other GTX1070 that are between 370 and 430 H/s

what do you get for this GPU if you dont OC it ? If you still get 270, try switching it to another riser and cables.

fabry1999

full member

Activity: 279

Merit: 100

I have one of my 7 GTX1070 that perform really bad about 270 H/s less than other GTX1060 that I have, do you know what could be the reason ?

the OC parameters are the same for all other GTX1070 that are between 370 and 430 H/s

gRanid

newbie

Activity: 2

Merit: 0

Quote from: Littledragons on September 27, 2017, 07:44:25 AM

Quote from: gRanid on September 27, 2017, 06:53:01 AM

How to use the parameter --intensity, whatever value I set, the percentage of the kernel load is always 100.

The Intensity command only sets max intensity for your gpus in the format --intensity 64 64 64 64
Do this for each card.
This will cap it at maximum intensity (1-64)

At me even at adjustments "--intensity 32" loading of a video core always 100. As should look a parameter for 1 video card?

fabry1999

full member

Activity: 279

Merit: 100

On ZEC it is better OC the GPU or the Core ?

what is the best power usage in term of performance and revenue on GTX1070 ?

Littledragons

full member

Activity: 294

Merit: 102

Quote from: gRanid on September 27, 2017, 06:53:01 AM

How to use the parameter --intensity, whatever value I set, the percentage of the kernel load is always 100.

The Intensity command only sets max intensity for your gpus in the format --intensity 64 64 64 64
Do this for each card.
This will cap it at maximum intensity (1-64)

gRanid

newbie

Activity: 2

Merit: 0

How to use the parameter --intensity, whatever value I set, the percentage of the kernel load is always 100.

ShowMeCoins

member

Activity: 129

Merit: 11

Quote from: fabry1999 on September 27, 2017, 06:10:33 AM

I have 2 PSU the first one for MB and USB PCI riser of 750W and the secondo one for all PCI-e 8 pin of 1200W

then using the same RIG for dual mining ETH+DCR with Claymore all work perfectly and the power usage is higher about 950W compared to ZEC mining that consumer 870W

I'd suggest to go easy on the +100 GPU. I have a couple of (above average) 1080ti's and just one doesn't like to be OC'ed passed +80. Causing similar effects when I do.

fabry1999

full member

Activity: 279

Merit: 100

Quote from: ShowMeCoins on September 27, 2017, 06:01:34 AM

Quote from: fabry1999 on September 27, 2017, 05:47:32 AM

I'm running a RIG with GTX1070 all with same overclock and power setting 65% power +100 GPU +600 MEM
and I have often crash with error code Thread exited with code: 46

anyone can help me ?

then why with the same OC and power config I have so many difference from the GPU ( on GPU 4-5-6 ) in term of Hashrate and temperature, as shown here :

Thanks

Fabrizio

Just a quick one.
1. Any change/luck using stock settings (65% power, +0 GPU, +0 MEM)?
2. You need a 1300Watt+ PSU .(7x 150 for GPU's+RISER + 250 for mobo+fans+sata)

I have 2 PSU the first one for MB and USB PCI riser of 750W and the secondo one for all PCI-e 8 pin of 1200W

then using the same RIG for dual mining ETH+DCR with Claymore all work perfectly and the power usage is higher about 950W compared to ZEC mining that consumer 870W

ShowMeCoins

member

Activity: 129

Merit: 11

Quote from: fabry1999 on September 27, 2017, 05:47:32 AM

I'm running a RIG with GTX1070 all with same overclock and power setting 65% power +100 GPU +600 MEM
and I have often crash with error code Thread exited with code: 46

anyone can help me ?

then why with the same OC and power config I have so many difference from the GPU ( on GPU 4-5-6 ) in term of Hashrate and temperature, as shown here :

Thanks

Fabrizio

Just a quick one.
1. Any change/luck using stock settings (65% power, +0 GPU, +0 MEM)?
2. You need a 1300Watt+ PSU .(7x 150 for GPU's+RISER + 250 for mobo+fans+sata)

fabry1999

full member

Activity: 279

Merit: 100

I'm running a RIG with GTX1070 all with same overclock and power setting 65% power +100 GPU +600 MEM
and I have often crash with error code Thread exited with code: 46

anyone can help me ?

then why with the same OC and power config I have so many difference from the GPU ( on GPU 4-5-6 ) in term of Hashrate and temperature, as shown here :

Thanks

Fabrizio

oup59

sr. member

Activity: 382

Merit: 251

Quote from: QuintLeo on September 26, 2017, 03:21:12 PM

Quote from: oup59 on September 26, 2017, 07:17:01 AM

I still mine SIGT and will do till PoS. Which of the Z coins do you mine? Zec, Zencash, Zcoin?

I am looking for the coin I will mine on my 1080Ti rig after SIG.

Doesn't really matter much, when one shifts a bit higher on profitability enough miners move to it to bring it back down again - very quickly and in some cases automatically.

Thanks for the feedback. I am more interested in mining and hodling for future value rather than current value.
So my priority is mining and accumulating more for now. I think I will give a chance to Zcoin for some time.

xyburcoin

full member

Activity: 210

Merit: 100

Quote from: jpl on September 26, 2017, 11:05:03 PM

Newbie here.. What is a good wallet to use?
Zcash4 win?
Jaxx has some really bad reviews.
Bittrex sends me a new ip address every time I log in ..and this.. (All trades have a 0.25% commission.)?
Myetherwallet

thx!

..edit.. I'm wondering if every time I shut off my internet router it makes a new ip address, and messes up my settings. Can anyone confirm this? I'm guessing if it does this, then I have to create a new etherium wallet every time for mining. ugh.

Try coinomi (for android)

you have a dynamic ip address from your ISP maybe you would like to subscribe to have a static one but for added cost.

I don't think you need to create a new ethereum wallet every time... are you mining on a pool?

jpl

member

Activity: 154

Merit: 11

Newbie here.. What is a good wallet to use?
Zcash4 win?
Jaxx has some really bad reviews.
Bittrex sends me a new ip address every time I log in ..and this.. (All trades have a 0.25% commission.)?
Myetherwallet

thx!

..edit.. I'm wondering if every time I shut off my internet router it makes a new ip address, and messes up my settings. Can anyone confirm this? I'm guessing if it does this, then I have to create a new etherium wallet every time for mining. ugh.

atecubanoS

newbie

Activity: 32

Merit: 0

Quote from: tf2addict on September 25, 2017, 03:32:27 PM

Code:

Statistics of the GPUs
GPU Temp Power Speed Efficiency
GeForce GTX 1070 57 C 117 W 433 Sol/s 3.70 Sol/W
GeForce GTX 1060 6GB 55 C 91 W 293 Sol/s 3.22 Sol/W
GeForce GTX 1060 6GB 55 C 88 W 292 Sol/s 3.32 Sol/W
GeForce GTX 1060 6GB 67 C 73 W 291 Sol/s 3.99 Sol/W

How do you get that to display in EWBF? I was able to get it displayed in the web browser though using localhost:4028.

I can't get either the 1060 or the 1070 above 2.9 efficiency stable no matter what settings I tweak.

The only setting I changed is the MAXIMUM WATTAGE of the GPUs... Look the shell script at my previous post...

Quote from: hanskan on September 25, 2017, 05:32:50 PM

Quote from: tf2addict on September 25, 2017, 03:32:27 PM

Code:

Statistics of the GPUs
GPU Temp Power Speed Efficiency
GeForce GTX 1070 57 C 117 W 433 Sol/s 3.70 Sol/W
GeForce GTX 1060 6GB 55 C 91 W 293 Sol/s 3.22 Sol/W
GeForce GTX 1060 6GB 55 C 88 W 292 Sol/s 3.32 Sol/W
GeForce GTX 1060 6GB 67 C 73 W 291 Sol/s 3.99 Sol/W

How do you get that to display in EWBF? I was able to get it displayed in the web browser though using localhost:4028.

I can't get either the 1060 or the 1070 above 2.9 efficiency stable no matter what settings I tweak.

--pec to display statistics

clock settings on those 1060s ? efficiency looks awesome

NO clock settings! The only setting I changed is the MAXIMUM WATTAGE of the GPUs... Look the shell script at my previous post... Maximum wattage of the 1060 is 90 Watts...

Vispilio

legendary

Activity: 2128

Merit: 1657

by far the best zcash miner, would be phenomenal if updates continued !!

QuintLeo

legendary

Activity: 1498

Merit: 1030

Quote from: oup59 on September 26, 2017, 07:17:01 AM

I still mine SIGT and will do till PoS. Which of the Z coins do you mine? Zec, Zencash, Zcoin?

I am looking for the coin I will mine on my 1080Ti rig after SIG.

Doesn't really matter much, when one shifts a bit higher on profitability enough miners move to it to bring it back down again - very quickly and in some cases automatically.

Topic: EWBF's CUDA Zcash miner - page 62. (Read 2164327 times)