EWBF's CUDA Zcash miner - page 59. | Bitcointalksearch.org

marthor

newbie

Activity: 60

Merit: 0

Quote from: jpl on September 30, 2017, 09:53:34 PM

So do I edit all my .bat files with EWBF?.. or just one? I've heard some just want to mine on Flypool only. I've currently edited all of them/ supernova, nicehash, nanopool, etc,.. to my wallet.. Just making sure its ok. Thanks!

You just need to put your address into the Flypool file and then start it.

digibum

newbie

Activity: 11

Merit: 0

This miner crashes my PC after 30 minutes to 6 hours on zcash.flypool.org.
Using 8 GTX 1070 wit no OC, power to 60%.
Temperature is under control with no more than 52°C.

I will post log file next time. Didn't have it enabled until now :/

jpl

member

Activity: 154

Merit: 11

So do I edit all my .bat files with EWBF?.. or just one? I've heard some just want to mine on Flypool only. I've currently edited all of them/ supernova, nicehash, nanopool, etc,.. to my wallet.. Just making sure its ok. Thanks!

farmtester1

newbie

Activity: 54

Merit: 0

Quote from: Kronny on September 30, 2017, 06:08:48 PM

Quote from: farmtester1 on September 30, 2017, 02:37:19 PM

Quote from: BHTeam on September 30, 2017, 10:21:01 AM

So are there any plans to use CUDA 9 with next version of the miner?

EWBF won't update this anymore, look for dstm's zec miner for active development.

Where he said that?

Actions mean more than words.

marthor

newbie

Activity: 60

Merit: 0

Quote from: matmator on September 30, 2017, 07:42:13 AM

Quote from: qualitas on September 29, 2017, 03:24:50 AM

Quote from: pokeytex on September 27, 2017, 09:34:56 PM

Regarding the above view. Is there a way to have all my rigs show up on one browser using the API command?

I did some quick testing to see what I could come up with, and for my setup it works OK.

Code:

Edit the IP.OF.RIG.X, save as "whatever-you-want.html" and see if it fits your needs
Copy/paste the iframe block to add more rigs

Code:

EDIT: This only works if you have actually added the API line in the startup file for your miner.
--api ip.of.rig.1:42000 - the actual IP and not letting it default to 127.0.0.1 for local access only.
And for remote rigs, you will need to use the external IP and set up port forwarding to get it to show

EDIT 2: You may want to change the 350 limit on height - running a few rigs with only 2 cards each, so rigs with more then 2 cards may need some more space then that.

Thanks @Red_Yoda for the suggestion earlier in the thread here

Disclaimer
- I'm running this on a 1080x1920 monitor (i.e flipped to portrait mode) so I get the rigs listed separately one after the other, pretty much like the original API shows them.
- If I'm opening the html file on one of my 1920x1080 landscape screens or my 2K / 4K screens they show up next to each other until the top row is filled and then the next one(s) show up on next row.

This can be adjusted by increasing the width to a larger number if you would prefer them listed one by one under each other.

thanks to you !! this works wonderfully!

this is exactly what I searched for

thank you !

http://nsa39.casimages.com/img/2017/09/30/mini_170930030921845296.jpg

Switch to Flypool. Nanopool underpays for Zcash.

Kronny

member

Activity: 137

Merit: 10

Quote from: farmtester1 on September 30, 2017, 02:37:19 PM

Quote from: BHTeam on September 30, 2017, 10:21:01 AM

So are there any plans to use CUDA 9 with next version of the miner?

EWBF won't update this anymore, look for dstm's zec miner for active development.

Where he said that?

terrxysq

newbie

Activity: 27

Merit: 0

is there a problem with displaying the watt usage etc? after running for 2days the stats are 0 temp 0 watt 0 sol/watt
but it still finds shares and the speed still seem to be ok.

UnknownX

full member

Activity: 175

Merit: 100

Quote from: farmtester1 on September 30, 2017, 02:37:19 PM

Quote from: BHTeam on September 30, 2017, 10:21:01 AM

So are there any plans to use CUDA 9 with next version of the miner?

EWBF won't update this anymore, look for dstm's zec miner for active development.

Did EWBF make any announce about that? or it's just your predictions?

QuintLeo

legendary

Activity: 1498

Merit: 1030

Limit of cards by brand is a drivers limit in Windows - as I recall neither supports more than 8 cards on a single Windows machine with their "stock" drivers, though I remember reading that there are ways to mod the drivers to support more.

Where has EWBF stated they are no longer going to develop their miner, I've NOT seen that posted anywhere except in FUD rumors from folks OTHER THAN EWBF.

farmtester1

newbie

Activity: 54

Merit: 0

Quote from: BHTeam on September 30, 2017, 10:21:01 AM

So are there any plans to use CUDA 9 with next version of the miner?

EWBF won't update this anymore, look for dstm's zec miner for active development.

qualitas

newbie

Activity: 4

Merit: 0

Quote from: matmator on September 30, 2017, 10:17:44 AM

I would like to use this page html off local and outside the home, what ip address I need to put?

Depends on your setup

External IP:42000 if running only one rig - but you will probably have to set up port forwarding in your router
If running more then one on, then you need to change API settings for each rig and make them use different ports - i.e 42000, 42001 and so on and then set up the router to send your command to the right rig. (check the ports you set up for know threats or interference with other services already using a port)

When it comes to external IP, it might fluctuate, so you may have to change the settings every now and then - or you can fix a dynamic DNS setup for your location and make it update a hostname that always points to your IP even if it changes.

Your current external IP here -> https://www.whatismyip.com/
If that stays the same for lengthy periods of time - you could just edit the IP of the html page the few times it does change to avoid the hassle of dynamic DNS setup

BHTeam

full member

Activity: 336

Merit: 100

https://www.crypto-coinz.net

So are there any plans to use CUDA 9 with next version of the miner?

matmator

sr. member

Activity: 487

Merit: 252

bou !

Quote from: qualitas on September 30, 2017, 08:17:50 AM

Quote from: matmator on September 30, 2017, 07:42:13 AM

thanks to you !! this works wonderfully!

this is exactly what I searched for

thank you !

Good to hear it was useful, and thanks for adding a screenshot so others can see if its something they would find use for as well.
Did not think of that when sitting in my own thoughts, trying to figure out a solution to add some extra stuff on that page.

I would like to use this page html off local and outside the home, what ip address I need to put?

klintistwood

full member

Activity: 157

Merit: 100

Out of the box is where I live

Quote from: tazmako on September 30, 2017, 08:35:47 AM

H110 Pro BTC+ right?

i see at website it say 13*AMD/8*AMD + 5*NVIDIA graphic cards. i dont know it can use all nvidia cards.

and what you os use?

thanks.

I bought this one: Asrock H110 (I had bought it around 200$, it's much cheaper now Sad

)
It's indeed a 13 PCI slot model, I didn't count the PCI 16x, that's why I thought it was a 12 PCI model. I don't about the split between Nvidia and AMD, I have 10x GTX 1060 installed and they're all working fine. I use Ubuntu 16.04.

tazmako

full member

Activity: 350

Merit: 100

XDNA - Most innovative cryptocurrency in 2018

Quote from: klintistwood on September 30, 2017, 07:53:38 AM

Quote from: tazmako on September 30, 2017, 07:36:51 AM

ETH you OC memory have more performance

ZEC you need to down memory and OC core more core more power = more performance

PS.what you main board for 10PCS?

Thanks, I'll try that.

I have an ASrock BTC with 12 PCI slots, I'm only using 10 of them.

H110 Pro BTC+ right?

i see at website it say 13*AMD/8*AMD + 5*NVIDIA graphic cards. i dont know it can use all nvidia cards.

and what you os use?

thanks.

qualitas

newbie

Activity: 4

Merit: 0

Quote from: matmator on September 30, 2017, 07:42:13 AM

thanks to you !! this works wonderfully!

this is exactly what I searched for

thank you !

http://nsa39.casimages.com/img/2017/09/30/mini_170930030921845296.jpg

Good to hear it was useful, and thanks for adding a screenshot so others can see if its something they would find use for as well.
Did not think of that when sitting in my own thoughts, trying to figure out a solution to add some extra stuff on that page.

klintistwood

full member

Activity: 157

Merit: 100

Out of the box is where I live

Quote from: tazmako on September 30, 2017, 07:36:51 AM

ETH you OC memory have more performance

ZEC you need to down memory and OC core more core more power = more performance

PS.what you main board for 10PCS?

Thanks, I'll try that.

I have an ASrock BTC with 12 PCI slots, I'm only using 10 of them.

wstealth

newbie

Activity: 37

Merit: 0

Quote from: matmator on September 30, 2017, 07:30:50 AM

I do not have a config.json file

Installation

- Download the latest version of the MinerKeeper on GitHub
- Extract the content of the archive to any folder on your drive (e.g. C:\MinerKeeper)
- Open this folder in the windows explorer
- Open config.json file for editing in your favorite text editor (or Notepad if you want)
- Set the configuration option (see the documentation)
- Run MinerKeeper.exe - it will run your miner automatically

zsugabubus007

newbie

Activity: 5

Merit: 0

Hi, my 6 x 1070 Zotac rig recently got these error messages:

INFO: Detected new work: 39f7ac8ebb08eea1c17c
CUDA: Device: 0 GeForce GTX 1070, 8192 MB PCI: 0000:01:00.0
CUDA: Device: 1 GeForce GTX 1070, 8192 MB PCI: 0000:02:00.0
CUDA: Device: 2 GeForce GTX 1070, 8192 MB PCI: 0000:03:00.0
CUDA: Device: 3 GeForce GTX 1070, 8192 MB PCI: 0000:04:00.0
CUDA: Device: 4 GeForce GTX 1070, 8192 MB PCI: 0000:05:00.0
CUDA: Device: 5 GeForce GTX 1070, 8192 MB PCI: 0000:06:00.0
CUDA: Device: 1 Selected solver: 2
CUDA: Device: 2 solver benchmark error work with default
CUDA: Device: 3 solver benchmark error work with default
CUDA: Device: 4 solver benchmark error work with default
CUDA: Device: 5 solver benchmark error work with default
CUDA: Device: 2 Thread exited with code: 2
CUDA: Device: 3 Thread exited with code: 2
CUDA: Device: 4 Thread exited with code: 2
CUDA: Device: 5 Thread exited with code: 2
INFO: Target: 0004189374bc6a7e...
INFO: Detected new work: c81997988816bda283fd
CUDA: Device: 0 GeForce GTX 1070, 8192 MB PCI: 0000:01:00.0
CUDA: Device: 1 GeForce GTX 1070, 8192 MB PCI: 0000:02:00.0
CUDA: Device: 2 GeForce GTX 1070, 8192 MB PCI: 0000:03:00.0
CUDA: Device: 3 GeForce GTX 1070, 8192 MB PCI: 0000:04:00.0
CUDA: Device: 4 GeForce GTX 1070, 8192 MB PCI: 0000:05:00.0
CUDA: Device: 5 GeForce GTX 1070, 8192 MB PCI: 0000:06:00.0
CUDA: Device: 0 Selected solver: 0
CUDA: Device: 1 Selected solver: 0
CUDA: Device: 2 Selected solver: 0
CUDA: Device: 4 Selected solver: 0
CUDA: Device: 5 Selected solver: 0
CUDA: Device: 3 Selected solver: 0

After that it just stopped working.
Do anyone know what error code 2 means? Google doesn't really help me this time..

Thanks in advance!

matmator

sr. member

Activity: 487

Merit: 252

bou !

Quote from: qualitas on September 29, 2017, 03:24:50 AM

Quote from: pokeytex on September 27, 2017, 09:34:56 PM

Regarding the above view. Is there a way to have all my rigs show up on one browser using the API command?

I did some quick testing to see what I could come up with, and for my setup it works OK.

Code:

Edit the IP.OF.RIG.X, save as "whatever-you-want.html" and see if it fits your needs
Copy/paste the iframe block to add more rigs

Code:

EDIT: This only works if you have actually added the API line in the startup file for your miner.
--api ip.of.rig.1:42000 - the actual IP and not letting it default to 127.0.0.1 for local access only.
And for remote rigs, you will need to use the external IP and set up port forwarding to get it to show

EDIT 2: You may want to change the 350 limit on height - running a few rigs with only 2 cards each, so rigs with more then 2 cards may need some more space then that.

Thanks @Red_Yoda for the suggestion earlier in the thread here

Disclaimer
- I'm running this on a 1080x1920 monitor (i.e flipped to portrait mode) so I get the rigs listed separately one after the other, pretty much like the original API shows them.
- If I'm opening the html file on one of my 1920x1080 landscape screens or my 2K / 4K screens they show up next to each other until the top row is filled and then the next one(s) show up on next row.

This can be adjusted by increasing the width to a larger number if you would prefer them listed one by one under each other.

thanks to you !! this works wonderfully!

this is exactly what I searched for

thank you !

Topic: EWBF's CUDA Zcash miner - page 59. (Read 2164338 times)