Topic: Free BTC transaction accelerator! (Read 1037 times)

Just sit this one out, mate. If it's not so urgent because;
1. No free service will be able to accelerate for you a transaction that size
2. Paid service will charge you so much fees (well they can even shamelessly ask for $1000 worth of fees for that transaction) that you wouldn't be left with much
3. bumping the transaction fee would also mean you will spend allot in transaction fees because of the so many inputs you have in the transaction as already pointed out by some members.

Learn how to consolidate your small inputs whenever the fee rates drop.

I think he wants to consolidate his input. He can increase the fee if he is in haste.

The transaction vbyte is around 4500

The mempool right now is around 218 sat/vbyte
At 100 sat/vbyte, the fee to be paid woukd be around 0.004501 BTC. Bitcoin at $44050, the fee is $198.27
At 200 sat/vbyte, the fee to be paid would be around 0.009002 BTC . The fee is $396.46

I think that amount is huge in fee. I will advise him to wait until the mempool become less congested. But he can increase the fee a little bit higher. Like 50 sat/vbyte. Or maybe the mempool will still become lesser congested.

OP supposed to have consolidated his inputs before this time. 2 sat/vbyte still got confirmed in November.

Your tx has 49 inputs, so the volume is far higher than what ViaBTC free accelerator accepts, it also does not meet their criteria in fee/byte. But your tx is rbf enabled, so if you cannot wait for the node you are connected to drop your tx, you can use rbf to bump it by replacing this tx with a new one paying a higher fee.

ViaBTC free accelerator can not be used for your transaction because your transaction size is 8422 bytes. Any transaction size greater than 500 bytes can not be accelerated. Also the fee rate you used is 8.551 sat/byte. To use ViaBTC free accelerator, the fee should not be less than 10 sat/byte. The transaction should not also have unconfirmed parent transaction.

You have no option than to wait until node your wallet is connecting to drop the transaction from their mempool so you will be able to respend the coin in another transaction. I will advise you to import the seed phrase on Electum so that ones a node connected to your Electrum wallet drop the transaction, you will be able to spend the coin. Some wallets will keep rebroadcasting the transaction instead, and not recommended.

3f3e568ca472126d8fbff5ea34b46b6895c7ed9e84ec21e47ec5c4b514d2e7e6
can you help me out

Considering the current situation with mempool, I can try to help you - just read OP regarding the minimum fee so that the transaction could be accelerated.

@TeenWolf80, I would be happy to help you, but both transactions do not meet the minimum fee (fee per byte) and the accelerator does not accept them. The options you have are RBF (bump fee) in case you are a sender and that option exists, or be patient until the mempool clears up a bit.

Hi, Lucius. I’ve got two transactions stuck in limbo. If you can help with just one, I’ll be your friend for life.


aa6183eb476f2b41ae98893e4a55b8d7dc80e068e3c731f8d11516e9c982eb20

85dcef97d8e99491201c577e9165f328c4def1a749c7b26369561aa056d6e37b

Given the state of mempool and the current high priority rate (in sats) I can try to speed up your transaction with this free accelerator. Please read the terms and conditions so that the transaction could be considered at all, and that the matter is extremely time-sensitive so I cannot promise more than 1 or 2 successful accelerations every full hour.

---

For those who will claim it doesn't work :


https://www.blockchain.com/btc/tx/13da2cce4770e5dab253065cf00ff8aba61b40de6748a23ae7478e8094ae9a91

oh men, I realized I misunderstood Charles-Tim's point at first when I increased the fee to 10 sat/vB and I didn't know that it was somewhere around 5 sat/B  I started to wonder when Lucius said I can't speed up this transaction. I can finally figure it out, I changed the transaction fee again, looks like it's on the right path, the transaction has been completed now 

I really thank you both very much, especially Charles-Tim. Thank you again for guiding me through everything from yesterday until now! I love you guys 

I have nothing to do with that transaction - and if you tried to speed it up, then you succeeded

Your newly txid is 8dc8bb0a0c42329a1cb9a4c530968ac16a97083c53b4b93415d5638d9c2c9b40

The transaction has been successfully accelerated via ViaBTC



https://www.blockchain.com/btc/block/687072. Probably acceleratated with the help of Lucius.

Increase it to 20 sat/vbyte, this will amounts to over 10 sat/byte which is the minimum fee that a transaction can have to be able to make use of ViaBTC free acceleratator. Or you can increase it to 28 sat/vbyte which can make your transaction confirmed in time (most probably in the next block) without even accelerating it.

I'm not sure I can keep waiting, it would be bad if this deal lasted until the end of the week. So, now I should increase the transaction fee, again, right? How much do I need to increase it so it can be supported by the accelerator or at least can be confirmed by tomorrow? I have no experience here  looks like I need about 31sat/vB to complete the transaction sooner right?

Unfortunately, I can't help you - your fee is too low for this accelerator.

---

@ChuckBuck, even if I was online I couldn't help you because you set a low fee both times - as you've already read vbyte and byte are not the same - and if you have a new transaction that meets the conditions, I'll be happy to help.

---

Also too low fee, which means I will have to edit the title to prevent further confusion...

I checked your transaction has not yet been confirmed, can you increase the fee to 30 sat/vbyte so it can be confirmed very early. Make sure you check mempool.space for the best fee. But if you wait, the transaction will be confirmed during this weekend because mempool will be less congested.

Did you make the transaction using Trustwallet? I doubt that. The transaction support replace-by-fee, which is most likely you used electrum or other supported wallet, and you will be able to pump the fee on he wallet used. But I do not think trust wallet support replace-by-fee, but we should leave any doubt. All you will need to do is to import your seed phrase on electrum wallet, make sure you select the derivational path of the address type you used for the transaction which is p2sh-p2wpkh (segwit).

Download electrum from https://electrum.org and verify its signature, to learn more about how to download and verify electrum wallet signature, you can use this guild.

Open electrum, click on next > standard wallet > I already have a seed > input your seed phrase > checked the BIP39 seed > and click on next > select p2sh-p2wpkh > click on next. The wallet will synchronize with the blockchain and you will be able to see your unconfirmed transaction, click on it, press on pump fee, you will be able to pump the fee. 25 to 35 sat/vbyte will be a good fee used now.

How about this one guys?

cc4c396f66b765648a36a345069de81f4743757013bbde05022025dc80915511

What if I ever want to use RBF?  How is the process because I use Trust wallet?  Does it also need to be imported into electrum first?  In case I don’t have that on the laptop yet. It is not possible on mobile because the trust wallet does not provide a private key, only seed phrases.

ya, I'll keep waiting, actually I'm not in a hurry, but you know, BTC is still in correction and I really don't know which way it's going to move  I am also going to bed, this means that I am about to go to bed nervous (even though the amount I send is only a small amount  ). Anyway, I'll ignore it for now.

You guys have really great expertise! I don't often learn about things like that, maybe there are not many traders with this knowledge, only real BTC enthusiasts like you  Thank!

These surges over the last couple of weeks don't last too long - I know it might be painful to wait for many hours to have your funds cleared, but the mempool has been draining away to nothing quite quickly.

Keep an eye on the progress of the mempool and the blocks found on the block-chain at https://mempool.space/

I will advice you to wait, but if you need the recent mempool feerate that can get your transaction confirmed in the next block, you can check https://mempool.space for that, the feerate that can get you transaction confirm in the next block is around 35 sat/vbyte. But I will advice you to wait if you are not in a hurry.

To use ViaBTC free acceleratator, you will still need to increase your transaction fee to around 20 sat/vbyte because you are using segwit address to send to segwit address, the minimum fee of a transaction before ViaBTC free acceleratator can be used is 10 sat/byte, using native segwit address will let it be around 20 sat/vbyte to be used as fee, so Lucius will be able to help you accelerate it at around 20 sat/vbyte. Or pump it to around 35 sat/vbyte, it will be confirmed in the next block or sooner.