bump 
PMed. 
Topic: [FS] All aluminum open-air case frames (now with support beams for USB risers) (Read 10938 times)
February 09, 2021, 04:16:57 PM
February 08, 2021, 10:54:22 PM
bump
March 31, 2018, 03:07:08 PM
A small improvement...
The PSUs are now secured to the frame via three mounting points.
The PSUs are now secured to the frame via three mounting points.
December 29, 2017, 10:38:54 AM
+1 for another satisfied customer. I ran into some issues assembling and Rich was more than accommodating to all my ridiculous questions.
December 29, 2017, 04:20:32 AM
Just wanted to add myself to the list of satisfied customers hailing from Canada that received my order today. Rack is sturdy and well built.
December 22, 2017, 08:55:04 PM
What are the sizes of these new 2 PSU versions with Riser mounts? I assume they won't stack on previous designs that were for 1 PSU?
All of the two PSU models share the same footprint and all of the one PSUs share the same footprint.
The one PSU model will/does also have the USB support beams. I just haven't added it to this thread just yet.
So with the stand and 2 single PSU rigs I previously purchased, is it possible to add the 2 PSU version to stack?
Separately, can I add the riser support beams?
You can't stack one onto two PSU models, or vise versa.
A kit to add USB riser support to your existing frame is $10.
Hmm,
How about a base large enough for a 2 PSU Frame to Sit on, then some sort of Riser/Coupler to allow the smaller 1 PSU frames to sit on top of a 2 PSU base frame?
I'm thinking about building a 2 PSU frame and what to add the riser base to my 2 existing 1 psu frames but I don't want to replace my frames to do this.
Also is it possible to get additional clearance between the base of the riser supports and the mainboard? (Taller side posts) - Specifically I want enough clearance have up to a 165mm Heatsink on top of the CPU of the 2 PSU Frame.
I have some ideas on a base with outriggers similar to one I got last time but I don't know if you have bandwidth to do something one-off, let me know.
Ah, yes, all of that is doable. Please send me a sketch. If not too complicated, I should have the time.
December 22, 2017, 08:43:30 PM
What are the sizes of these new 2 PSU versions with Riser mounts? I assume they won't stack on previous designs that were for 1 PSU?
All of the two PSU models share the same footprint and all of the one PSUs share the same footprint.
The one PSU model will/does also have the USB support beams. I just haven't added it to this thread just yet.
So with the stand and 2 single PSU rigs I previously purchased, is it possible to add the 2 PSU version to stack?
Separately, can I add the riser support beams?
You can't stack one onto two PSU models, or vise versa.
A kit to add USB riser support to your existing frame is $10.
Hmm,
How about a base large enough for a 2 PSU Frame to Sit on, then some sort of Riser/Coupler to allow the smaller 1 PSU frames to sit on top of a 2 PSU base frame?
I'm thinking about building a 2 PSU frame and what to add the riser base to my 2 existing 1 psu frames but I don't want to replace my frames to do this.
Also is it possible to get additional clearance between the base of the riser supports and the mainboard? (Taller side posts) - Specifically I want enough clearance have up to a 165mm Heatsink on top of the CPU of the 2 PSU Frame.
I have some ideas on a base with outriggers similar to one I got last time but I don't know if you have bandwidth to do something one-off, let me know.
December 22, 2017, 12:53:57 AM
What are the sizes of these new 2 PSU versions with Riser mounts? I assume they won't stack on previous designs that were for 1 PSU?
All of the two PSU models share the same footprint and all of the one PSUs share the same footprint.
The one PSU model will/does also have the USB support beams. I just haven't added it to this thread just yet.
So with the stand and 2 single PSU rigs I previously purchased, is it possible to add the 2 PSU version to stack?
Separately, can I add the riser support beams?
You can't stack one onto two PSU models, or vise versa.
A kit to add USB riser support to your existing frame is $10.
December 22, 2017, 12:40:53 AM
What are the sizes of these new 2 PSU versions with Riser mounts? I assume they won't stack on previous designs that were for 1 PSU?
All of the two PSU models share the same footprint and all of the one PSUs share the same footprint.
The one PSU model will/does also have the USB support beams. I just haven't added it to this thread just yet.
So with the stand and 2 single PSU rigs I previously purchased, is it possible to add the 2 PSU version to stack?
Separately, can I add the riser support beams?
December 22, 2017, 12:01:24 AM
What are the sizes of these new 2 PSU versions with Riser mounts? I assume they won't stack on previous designs that were for 1 PSU?
All of the two PSU models share the same footprint and all of the one PSUs share the same footprint.
The one PSU model will/does also have the USB support beams. I just haven't added it to this thread just yet.
December 21, 2017, 10:37:59 PM
The two PSU mining tray now comes with two support beams for USB risers. This version is $105.
The risers can be securely fastened anywhere along the slotted extrusions (only 6 shown here).
PayPal only.
Shipping from Washington State, US.
The one PSU mining tray is now on sale for $89 and the two PSU is $99.
Lead time is currently only 1-2 business days.
All models can handle 7-8 GPUs and are stackable.
One PSU version, 24-inches wide (same footprint as the old "Wide Open-frame Mining Tray (one PSU)"),$120 $89:
Two PSU version, 26-inches wide is $99.
PayPal only.
Shipping from Washington State, US.
New optional GPU-only tier for the two PSU mining tray:
This option along with a dual PSU tray is the perfect frame for the Biostar TB250-BTC PRO or ASrock H110 Pro BTC+ motherboards.
$95 $60 (for the optional GPU-tier). PayPal only. Shipping from Washington, US.
In order to mount 12/13 GPUs, along with the rest of a rig, also requires purchasing a standard dual PSU tray.
The risers can be securely fastened anywhere along the slotted extrusions (only 6 shown here).
PayPal only.
Shipping from Washington State, US.
The one PSU mining tray is now on sale for $89 and the two PSU is $99.
Lead time is currently only 1-2 business days.
All models can handle 7-8 GPUs and are stackable.
One PSU version, 24-inches wide (same footprint as the old "Wide Open-frame Mining Tray (one PSU)"),
Two PSU version, 26-inches wide is $99.
PayPal only.
Shipping from Washington State, US.
New optional GPU-only tier for the two PSU mining tray:
This option along with a dual PSU tray is the perfect frame for the Biostar TB250-BTC PRO or ASrock H110 Pro BTC+ motherboards.
In order to mount 12/13 GPUs, along with the rest of a rig, also requires purchasing a standard dual PSU tray.
What are the sizes of these new 2 PSU versions with Riser mounts? I assume they won't stack on previous designs that were for 1 PSU?
December 19, 2017, 04:52:52 PM
The two PSU mining tray now comes with two support beams for USB risers. This version is $105.
The risers can be securely fastened anywhere along the slotted extrusions (only 6 shown here).
PayPal only.
Shipping from Washington State, US.
The risers can be securely fastened anywhere along the slotted extrusions (only 6 shown here).
PayPal only.
Shipping from Washington State, US.
December 15, 2017, 02:26:35 PM
Came over to say really satisfied with the frames I ordered. Will order more. Only issue / constructive criticism I might have would be about the motherboard size. For example, I believe in the pics you have extended ATX ? If I take for example a "standard" 6 gpu motherboard like a biostar tb250 it won't fit properly with the standoffs. But no worries it still works, and even if your motherboard is weird, you can always drill new holes (really easy to do).
Overall review of the frames, 9.5/10. Takes me about one hour from scratch to everything installed ready to mine.
Overall review of the frames, 9.5/10. Takes me about one hour from scratch to everything installed ready to mine.
Ah, I see. The spacing of the beams can be adjusted (for less than normal depth boards) and the female-female spacers/standoffs can be bolted to just the motherboard (so the motherboard is supported over a beam). Oh, and I will start to include some extra spacers/standoffs in order to do just that. Sorry!
December 15, 2017, 01:35:05 PM
Came over to say really satisfied with the frames I ordered. Will order more. Only issue / constructive criticism I might have would be about the motherboard size. For example, I believe in the pics you have extended ATX ? If I take for example a "standard" 6 gpu motherboard like a biostar tb250 it won't fit properly with the standoffs. But no worries it still works, and even if your motherboard is weird, you can always drill new holes (really easy to do).
Overall review of the frames, 9.5/10. Takes me about one hour from scratch to everything installed ready to mine.
Overall review of the frames, 9.5/10. Takes me about one hour from scratch to everything installed ready to mine.
December 10, 2017, 04:36:09 AM
Bump
November 25, 2017, 09:45:22 PM
I have been looking for a rack to mount my GPUs/setup for a few weeks now. Is it possible to mount the ASUS B250 Motherboard on there with a EVGA 1k PSU and potentially adding another 850w PSU in the future with 5-6 cards?
Looks like a great product but just wanted to clarify a few things as I finalize what I am going to purchase.
Looks like a great product but just wanted to clarify a few things as I finalize what I am going to purchase.
Start here and scroll down: https://bitcointalksearch.org/topic/fs-all-aluminum-open-air-case-frames-now-with-support-beams-for-usb-risers-1487782
The fourth picture looks like it may fit your request.
edited to fix spelling
November 21, 2017, 11:57:57 AM
I have been looking for a rack to mount my GPUs/setup for a few weeks now. Is it possible to mount the ASUS B250 Motherboard on there with a EVGA 1k PSU and potentially adding another 850w PSU in the future with 5-6 cards?
Looks like a great product but just wanted to clarify a few things as I finalize what I am going to purchase.
Yes. Looks like a great product but just wanted to clarify a few things as I finalize what I am going to purchase.
November 21, 2017, 10:02:35 AM
I have been looking for a rack to mount my GPUs/setup for a few weeks now. Is it possible to mount the ASUS B250 Motherboard on there with a EVGA 1k PSU and potentially adding another 850w PSU in the future with 5-6 cards?
Looks like a great product but just wanted to clarify a few things as I finalize what I am going to purchase.
Looks like a great product but just wanted to clarify a few things as I finalize what I am going to purchase.
November 20, 2017, 01:40:56 PM
All mining trays are 15% off! Sale is running now through Nov. 27th. Limit 4x.
September 30, 2017, 08:21:30 PM
The one PSU mining tray is now on sale for $89 USD.
Jump to: