further improved phatk_dia kernel for Phoenix + SDK 2.6 - 2012-01-13 - page 12.

dikidera

full member

Activity: 126

Merit: 100

Quote from: Diapolo on July 18, 2011, 03:37:33 AM

Quote from: phorensic on July 18, 2011, 03:28:53 AM

New version 2011-07-17 getting a lot of:

Code:

2011-07-18 01:24:09: Listener for "bitcoinmonkey": [18/07/2011 01:24:09] Kernel error: Unusual behavior from OpenCL. Hardware problem?

I have never seen that message during my tests with the release version of the kernel. What OS, which SDK are you on?

I wonder if he copied over the init.py file.

Diapolo

hero member

Activity: 772

Merit: 500

Quote from: phorensic on July 18, 2011, 03:28:53 AM

New version 2011-07-17 getting a lot of:

Code:

2011-07-18 01:24:09: Listener for "bitcoinmonkey": [18/07/2011 01:24:09] Kernel error: Unusual behavior from OpenCL. Hardware problem?

I have never seen that message during my tests with the release version of the kernel. What OS, which SDK are you on?

phorensic

hero member

Activity: 630

Merit: 500

New version 2011-07-17 getting a lot of:

Code:

2011-07-18 01:24:09: Listener for "bitcoinmonkey": [18/07/2011 01:24:09] Kernel error: Unusual behavior from OpenCL. Hardware problem?

Diapolo

hero member

Activity: 772

Merit: 500

Quote from: coblee on July 17, 2011, 10:23:28 PM

Quote from: Tartarus on July 17, 2011, 09:47:58 PM

Quote from: BOARBEAR on July 17, 2011, 06:32:27 PM

Can you make another version that includes all the recent changes and __init__.py does not need to changed?
thanks

Why? Just unzip in the kernels/phatk/ directory.

Main reason is some people like to use this kernel with poclbm. The 7-11 works, but the newest doesn't because it requires changes in __init__.py which is specific to phoenix. BOARBEAR is asking for a version that includes all the additional improvements since 7-11 that doesn't require any changes to __init__.py.

It is impossible to create a version of this kernel that works without modifications in the main miner software. As I wrote, there are values and variables, that the kernel uses and which are precalculated in the miner software and then passed as parameters to the kernel. A miner, which doesn't pass the required parameters will not work without beeing modified, sorry.

You guys are free to mod the kernel for yourself to revert the changes, which require a modded miner software and only take the ones, which can work without.

Dia

coblee

donator

Activity: 1654

Merit: 1351

Creator of Litecoin. Cryptocurrency enthusiast.

Quote from: Tartarus on July 17, 2011, 09:47:58 PM

Quote from: BOARBEAR on July 17, 2011, 06:32:27 PM

Can you make another version that includes all the recent changes and __init__.py does not need to changed?
thanks

Why? Just unzip in the kernels/phatk/ directory.

Main reason is some people like to use this kernel with poclbm. The 7-11 works, but the newest doesn't because it requires changes in __init__.py which is specific to phoenix. BOARBEAR is asking for a version that includes all the additional improvements since 7-11 that doesn't require any changes to __init__.py.

joulesbeef

sr. member

Activity: 476

Merit: 250

moOo

Quote

Can you make another version that includes all the recent changes and __init__.py does not need to changed?
thanks

no sure your reasoning, but if you want that, just grab the 7-11 version.. the version before this latest.

You dont gain all that much from the changes in __init__.py if you really want to do with out, you wont be shooting yourself in the foot. So grab the last version.

Personally I appreciate even the smallest increase.. so thanks for the work

Tartarus

newbie

Activity: 47

Merit: 0

Quote from: BOARBEAR on July 17, 2011, 06:32:27 PM

Can you make another version that includes all the recent changes and __init__.py does not need to changed?
thanks

Why? Just unzip in the kernels/phatk/ directory.

deepceleron

legendary

Activity: 1512

Merit: 1036

I get lots of 'unusual opencl behavior. hardware problem?' on the latest version, using a fresh Catalyst 11.6 driver (not CPU buggy hotfix) on WinXP on two different miners, going back to stock phoenix and 07-11 kernel is fine.

BOARBEAR

member

Activity: 77

Merit: 10

Can you make another version that includes all the recent changes and __init__.py does not need to changed?
thanks

MiningBuddy

hero member

Activity: 927

Merit: 1000

฿itcoin ฿itcoin ฿itcoin

Got an extra 1mhs from my cards with the latest patch, cheers

dadittox

newbie

Activity: 23

Merit: 0

Updated from 2011-07-11 to 2011-07-17 kernel. Hash rate increased from 325 to 327 on 6950, and from 280 to 281 on 6870 all at stock clocks. Not a big increase but it's always nice to have a few mhashes for free. Keep up good work!

Diapolo

hero member

Activity: 772

Merit: 500

Quote from: bcforum on July 17, 2011, 12:43:55 PM

I get the same speed with DiabloMiner

No need to use Phoenix or this kernel then Wink

...

Dia

bcforum

full member

Activity: 140

Merit: 100

I get the same speed with DiabloMiner

dishwara

legendary

Activity: 1855

Merit: 1016

Same hash rate as mod.zip. No "more" hashes.

erek

newbie

Activity: 36

Merit: 0

Solid increase equivalent to nearly 5MHz overclock w/ 2011-07-17

Catalyst 11.7 Early + SDK 2.5

905/340 GPU/VRAM clocks on (2x 6970s)

hitting 812+ MH/sec

Peao

legendary

Activity: 1320

Merit: 1001

I noticed an improvement in performance.

Thank you, Dia!

CYPER

hero member

Activity: 812

Merit: 502

2011-07-07 was the best for me so far and with 2011-07-17 I see no improvements - the speed is 1758-1760 as before with the same fluctuations.

4x XFX 5870 @ 960Mhz Core & 300Mhz Memory
Ubuntu 32bit
SDK 2.1
11.5 Drivers

dikidera

full member

Activity: 126

Merit: 100

With this version on my 5870: 410.58/411.6 -> 413.44/414Mhash/s

But on my HD5850, i see a decrease of a minimum of 0.50 mhash/s

Diapolo

hero member

Activity: 772

Merit: 500

Important: since version 2011-07-17 a modified version of __init__.py (for the Phoenix 1.5 miner) is included in this package and has to be used!
The kernel won't work for other Miners without modifications to them, see kernel.cl for further infos.

The new version 2011-07-17 is ready for download

. Should be faster on 58XX and 69XX cards again.
This version will only work, if you use it with Phoenix and the supplied __init__.py file because of modifications to kernel variables!

A very big thank you goes to user Vince for input and ideas!

Download here:
http://www.mediafire.com/?317u0y93u7mnbys

Have fun,
Dia

coblee

donator

Activity: 1654

Merit: 1351

Creator of Litecoin. Cryptocurrency enthusiast.

Donation sent!

When you release the next version, please explain whats changed in __init__.py.
I'm using fpgaminer's poclbm w/ phatk: http://forum.bitcoin.org/index.php?topic=19169.0
I'd like to see if we can make your phatk kernel still work with that.

Thanks!

Topic: further improved phatk_dia kernel for Phoenix + SDK 2.6 - 2012-01-13 - page 12. (Read 106928 times)