rawintensity is the most important part for cryptonight...there are some magic numbers that increase hashrate very well
sharing is caring!!!!!!
Topic: Gateless Gate Sharp 1.3.8: 30Mh/s (Ethash) on RX 480! - page 122. (Read 214410 times)
rawintensity is the most important part for cryptonight...there are some magic numbers that increase hashrate very well
sharing is caring!!!!!!
you miner has good interface but its not fast enough
with 16 / 8 i get 820 on cryptonight (sgminer 920h/s)
if i go higher with intensity or worksize its not stable
with 16 / 8 i get 820 on cryptonight (sgminer 920h/s)
if i go higher with intensity or worksize its not stable
Well, it is only optimized for a few cards so far...
Which card do you have?
i have rx 580 8gb cards...i use rawintensity in sgminer which is better for cryptonight from my experience
Does rawintensity make that much difference? Let me see...
rawintensity is the most important part for cryptonight...there are some magic numbers that increase hashrate very well
you miner has good interface but its not fast enough
with 16 / 8 i get 820 on cryptonight (sgminer 920h/s)
if i go higher with intensity or worksize its not stable
with 16 / 8 i get 820 on cryptonight (sgminer 920h/s)
if i go higher with intensity or worksize its not stable
Well, it is only optimized for a few cards so far...
Which card do you have?
i have rx 580 8gb cards...i use rawintensity in sgminer which is better for cryptonight from my experience
Does rawintensity make that much difference? Let me see...
you miner has good interface but its not fast enough
with 16 / 8 i get 820 on cryptonight (sgminer 920h/s)
if i go higher with intensity or worksize its not stable
with 16 / 8 i get 820 on cryptonight (sgminer 920h/s)
if i go higher with intensity or worksize its not stable
Well, it is only optimized for a few cards so far...
Which card do you have?
i have rx 580 8gb cards...i use rawintensity in sgminer which is better for cryptonight from my experience
zawawa for ETC. or btcgold? is ottimized? 
my card, 470, 480, 570, 580, 1070 all 8gb
my card, 470, 480, 570, 580, 1070 all 8gb you miner has good interface but its not fast enough
with 16 / 8 i get 820 on cryptonight (sgminer 920h/s)
if i go higher with intensity or worksize its not stable
with 16 / 8 i get 820 on cryptonight (sgminer 920h/s)
if i go higher with intensity or worksize its not stable
Well, it is only optimized for a few cards so far...
Which card do you have?
you miner has good interface but its not fast enough
with 16 / 8 i get 820 on cryptonight (sgminer 920h/s)
if i go higher with intensity or worksize its not stable
with 16 / 8 i get 820 on cryptonight (sgminer 920h/s)
if i go higher with intensity or worksize its not stable
Hi,
can you add. support for poloniex XMR address? Miner say invalid Xmr address, but in the status page ,I see my balance.
can you add. support for poloniex XMR address? Miner say invalid Xmr address, but in the status page ,I see my balance.
It should work with the new version.
Gateless Gate Sharp 1.1.0 alpha
https://github.com/zawawawa/GatelessGateSharp/releases/tag/v1.1.0-alpha
* Add "Custom Pool Settings."
* Various bug fixes and improvements.
Good stuff, good stuff.
https://github.com/zawawawa/GatelessGateSharp/releases/tag/v1.1.0-alpha
* Add "Custom Pool Settings."
* Various bug fixes and improvements.
Good stuff, good stuff.
Hi,
can you add. support for poloniex XMR address? Miner say invalid Xmr address, but in the status page ,I see my balance.
can you add. support for poloniex XMR address? Miner say invalid Xmr address, but in the status page ,I see my balance.
hello
can you add electroneum to it?
been using your previous version for monero and its very very nice
i want to shift to etn which is also based from monero
can you possibly add it?
can you add electroneum to it?
been using your previous version for monero and its very very nice
i want to shift to etn which is also based from monero
can you possibly add it?
That should be possible with custom pools. I am polishing this feature now, and it should be ready today.
What about X11Gost, Neoscrypt or Nist5 algos? Maybe one of them will be good for dual mining with ethereum?
Neoscrypt would be TERRIBLE. X11Gost would have to be *very* carefully structured, and is likely just too damn big. Even NIST5 is likely too big.
What about X11Gost, Neoscrypt or Nist5 algos? Maybe one of them will be good for dual mining with ethereum?
I wonder if keccak could be dual mined? Its run at maximum mem clock reduction, so could run side by side with ETH no? Just thinking you would get more peanuts if you offered something others didnt...
Thanks for your work
Thanks for your work
hello
can you add electroneum to it?
been using your previous version for monero and its very very nice
i want to shift to etn which is also based from monero
can you possibly add it?
can you add electroneum to it?
been using your previous version for monero and its very very nice
i want to shift to etn which is also based from monero
can you possibly add it?
https://github.com/lbryio/lbrycrd-gpu
Is this the fastest open-source OpenCL Lbry kernel out there?
There is an issue about this not working with newer drivers, though.
I feel I am spending most of my time debugging no matter where I go...
Is this the fastest open-source OpenCL Lbry kernel out there?
There is an issue about this not working with newer drivers, though.
I feel I am spending most of my time debugging no matter where I go...
Pascal, Sia, Lbry, Decred... That's about it, no?
Yes. Lbry first please. Decred, Pascal, Sia may be added after.
Pascal, Sia, Lbry, Decred... That's about it, no?
There is a pretty obscure API in ADL for I2C, right?
Actually, I can just off-load hardware management to MSI AfterBurner and use its API to control voltages and clock frequencies, at least for the time being. I definitely need MMIO for GDS and memory timings, though...
Actually, I can just off-load hardware management to MSI AfterBurner and use its API to control voltages and clock frequencies, at least for the time being. I definitely need MMIO for GDS and memory timings, though...
ADL is useless - Linux has dropped that trash, and they probably will do the same for Windows shortly.
Yeah, you are absolutely right about that...
It seems that NiceHash is going to resurrect AMD support for excavator at last, so I need to do a ton of preparatory work before that actually happens.
Dual modes for ethereum needed...
The number of hours I work for NiceHash remains (presumably) the same. No worries.
Actually, dual-mining may help the magic peanuts... Which algo do you want first? I will let you choose.
There is a pretty obscure API in ADL for I2C, right?
Actually, I can just off-load hardware management to MSI AfterBurner and use its API to control voltages and clock frequencies, at least for the time being. I definitely need MMIO for GDS and memory timings, though...
Actually, I can just off-load hardware management to MSI AfterBurner and use its API to control voltages and clock frequencies, at least for the time being. I definitely need MMIO for GDS and memory timings, though...
ADL is useless - Linux has dropped that trash, and they probably will do the same for Windows shortly.
Yeah, you are absolutely right about that...
It seems that NiceHash is going to resurrect AMD support for excavator at last, so I need to do a ton of preparatory work before that actually happens.
Dual modes for ethereum needed...
Jump to: