Topic: Gigampz: Power Supply Kits & Adapters For Bitcoin Mining. Industrial grade. - page 4. (Read 68227 times)
November 20, 2014, 04:51:57 PM
Can this adapter work on a HO SSA70 DL 580 1200w power supply?
November 19, 2014, 02:25:04 PM
I sent you a PM two days ago about buying more boards, have you had a chance to look at it?
Just sent you a Bitpay invoice, thanks for your order!
November 19, 2014, 10:52:06 AM
I sent you a PM two days ago about buying more boards, have you had a chance to look at it?
November 18, 2014, 03:00:51 PM
Just got a fresh batch of boards.
November 11, 2014, 10:34:40 PM
We've got cables and PSU back in stock and still have boards left.
November 09, 2014, 12:07:05 PM
I will be shipping the rest of your breakout board cases later this week...I am upgrading my printer today and should have it back online this evening and I can crank out the last few cases I've promised you. I will post pics asap
Thanks again bro!
Thanks again bro!
November 09, 2014, 11:05:59 AM
Will the DPS1200FBA dp the job ?
What gauge of wire to use and any safety precaution measures that I need to follow to prevent any electrical hazard or worst frying up my boards and my house ?
What gauge of wire to use and any safety precaution measures that I need to follow to prevent any electrical hazard or worst frying up my boards and my house ?
The short answer is you need to get 2 PSUs to do this safely.
If you are running from standard American home wall outlets (120 Volt power) the DPS1200FBA puts out 900 watts. You need to run on 240 Volt wall power to get the full 1200 watts out of it. Even then it will not power more than 3 Ants
A DPS-800GBA can run 2 Antminer S1 (OC or UC) , S3, or S3+ units so if you are planning on 3 S3+ plus an S1 you are going to need 2 PSU's.
You would need a 1600+ Watt PSU to power all 4 of those off the same PSU and if you are using standard 15 amp home outlets you are going to exceed the capacity of your 15 amp breakers if you use a single PSU. To use a 1600 Watt PSU safely at full load you really need a more heavy duty outlet than is standard in most American homes.
November 09, 2014, 05:25:32 AM
Will the DPS1200FBA dp the job ?
What gauge of wire to use and any safety precaution measures that I need to follow to prevent any electrical hazard or worst frying up my boards and my house ?
What gauge of wire to use and any safety precaution measures that I need to follow to prevent any electrical hazard or worst frying up my boards and my house ?
November 09, 2014, 12:23:15 AM
Hi BTC
This is my 1st posting in the forum .I got a question .Is there any possibality to attached more than 4 pcie cable set on the bb ?looking to setup 6 pcie for my 3x S3+ and maybe ⅞ pcie for my UC/UV S1 ? sorry if noobs question
This is my 1st posting in the forum .I got a question .Is there any possibality to attached more than 4 pcie cable set on the bb ?looking to setup 6 pcie for my 3x S3+ and maybe ⅞ pcie for my UC/UV S1 ? sorry if noobs question
You will need at least 1200W+ PSU for them...
ZiG
November 08, 2014, 07:23:28 PM
Hi BTC
This is my 1st posting in the forum .I got a question .Is there any possibality to attached more than 4 pcie cable set on the bb ?looking to setup 6 pcie for my 3x S3+ and maybe ⅞ pcie for my UC/UV S1 ? sorry if noobs question
This is my 1st posting in the forum .I got a question .Is there any possibality to attached more than 4 pcie cable set on the bb ?looking to setup 6 pcie for my 3x S3+ and maybe ⅞ pcie for my UC/UV S1 ? sorry if noobs question
November 06, 2014, 04:39:37 PM
Still have a bunch of these in stock.
...and the new price is...
ZiG
Price is negotiable for bulk buyers. All reasonable offers will be considered.
November 06, 2014, 04:25:18 PM
Any more Common Slot models? I would be interested in some more of those.
I have 4 Common Slot board left. The rest are for the DPS-800GBA.
November 06, 2014, 02:27:44 PM
Any more Common Slot models? I would be interested in some more of those.
November 06, 2014, 01:05:07 AM
Still have a bunch of these in stock.
...and the new price is...
ZiG
November 05, 2014, 04:07:12 PM
Still have a bunch of these in stock.
October 19, 2014, 09:21:11 PM
Any chance you could add a 5v Type A female USB header on any of your boards?
Just in case you missed this:
https://bitcointalksearch.org/topic/m.7334094
Thanks for posting that, it's been awhile since I read trough this thread.
I was just offering a suggestion to the OP so that they might consider adding a header on a future board revision.
Not everyone is into modding and plug n play is so much better anyways.
You can definitely get a cheap regulator to get 5v or hook in to the existing 5v pins. We are trying to keep the cost as low as possible and adding additional connectors gets pricey and since most people use these to power Antminers they don't care about 5v.
In other news we got a fresh shipment of DPS-800GBA boards in.
October 12, 2014, 02:03:31 PM
[...]
Not everyone is into modding and plug n play is so much better anyways.
Not everyone is into modding and plug n play is so much better anyways.
Nonono, the modding is 75% of the fun!
pmorici explains a bit about it a few posts above the one I linked to.
October 12, 2014, 01:57:41 PM
Any chance you could add a 5v Type A female USB header on any of your boards?
Just in case you missed this:
https://bitcointalksearch.org/topic/m.7334094
Thanks for posting that, it's been awhile since I read trough this thread.
I was just offering a suggestion to the OP so that they might consider adding a header on a future board revision.
Not everyone is into modding and plug n play is so much better anyways.
October 12, 2014, 01:49:18 PM
Any chance you could add a 5v Type A female USB header on any of your boards?
Just in case you missed this:
https://bitcointalksearch.org/topic/m.7334094
October 12, 2014, 01:31:00 PM
Any chance you could add a 5v Type A female USB header on any of your boards?
This would be a great feature allowing to power 5v devices such as R-Pi, BeagleBone and WRT router/AP's etc.
I will be shipping the rest of those cases your way within the next week and will PM you tracking info.
Thanks!
This would be a great feature allowing to power 5v devices such as R-Pi, BeagleBone and WRT router/AP's etc.
I will be shipping the rest of those cases your way within the next week and will PM you tracking info.
Thanks!
Jump to: