GMiner v3.24 Ergo+KASPA+ZIL/KAWPOW/Equihash/Cortex - page 130.

MineOrDie

jr. member

Activity: 75

Merit: 1

Quote from: lyolyalya on November 12, 2018, 12:59:00 PM

hello.how can i close the miner with keyboard shortcut?is it possible to do that like in ewbf miner?would be nice so i can use it with third party software.
UPD.got it.disabled watchdog and it closes properly.

Could you please clean up a bit the console output so it can be read more easily? Every GPU in new line. You can add an option to use the old view for those who like the more compact one. Now I need a good minute to figure out what's what for every rig.

lyolyalya

sr. member

Activity: 455

Merit: 250

hello.how can i close the miner with keyboard shortcut?is it possible to do that like in ewbf miner?would be nice so i can use it with third party software.
UPD.got it.disabled watchdog and it closes properly.

Zminer777

member

Activity: 488

Merit: 37

Quote from: vrottenberg on November 11, 2018, 03:36:42 PM

No! it isn't work with .bat file! If in .bat file specified pool, like --server eu.btgpool.pro, and if --config failover.txt - it isn't work!
see Claymore's pools.txt or ccminer config.json. - they work properly.
thx

You cannot mix command line arguments and configuration file, because it leads to ambiguity.
If you pass --config option you have to specify all parameters in configuration file (algorithm, personalization string, main pool and all failover pools, etc.)

vrottenberg

jr. member

Activity: 31

Merit: 2

Quote from: Zminer777 on November 10, 2018, 11:30:38 AM

Quote from: vrottenberg on November 10, 2018, 11:14:10 AM

Hi dev,
How to make --config work with .bat file pools?
Example:
miner.exe --algo 144_5 --pers BgoldPoW --server eu.btgpool.pro --port 1445 --user GZdx44gPVFX7GfeWXA3kyiuXecym3CWGHi.rig0 --pass x --pec --config pools.txt

when I specified pools in .bat file, they do not work in the config pools.txt

it is necessary that the main pool was in the command line, and backup pools in the configuration file...
thanks

Hi,
archive with miner contains sample configuration file ("sample_config.txt"), please check it.
You have to add [server] section for each your pool.

No! it isn't work with .bat file! If in .bat file specified pool, like --server eu.btgpool.pro, and if --config failover.txt - it isn't work!
see Claymore's pools.txt or ccminer config.json. - they work properly.
thx

Juniormkl

newbie

Activity: 155

Merit: 0

Gminer 1.0.8 Added to https://minermonitoring.com/ Join our discord https://discord.gg/aGGaeqq

Zminer777

member

Activity: 488

Merit: 37

Quote from: avirdoz on November 10, 2018, 02:22:38 PM

Does the miner have a json output from an api?

yes, access to "http://localhost:API_PORT/stat"

avirdoz

legendary

Activity: 1191

Merit: 1001

Does the miner have a json output from an api?

notsure85

member

Activity: 139

Merit: 10

Quote from: Zminer777 on November 10, 2018, 11:53:38 AM

Quote from: notsure85 on November 10, 2018, 11:48:41 AM

1.08 crashes almost instantly for me, 1.07 has been running fine for days.
Mining Zero

win10 1709, 6x1080ti/1x1080 , 416.34 drivers

Can you share command line arguments? I'll try to reproduce crash.

nothing fancy, tried the same for 1.08 and same oc settings ofc.

miner.exe --algo 192_7 --pers ZERO_PoW --server zero.suprnova.cc --port 6568 --user xxxxxxx --pass x -t 85 85 85 85 85 85 85

Zminer777

member

Activity: 488

Merit: 37

Quote from: notsure85 on November 10, 2018, 11:48:41 AM

1.08 crashes almost instantly for me, 1.07 has been running fine for days.
Mining Zero

win10 1709, 6x1080ti/1x1080 , 416.34 drivers

Can you share command line arguments? I'll try to reproduce crash.

notsure85

member

Activity: 139

Merit: 10

1.08 crashes almost instantly for me, 1.07 has been running fine for days.
Mining Zero

win10 1709, 6x1080ti/1x1080 , 416.34 drivers

Zminer777

member

Activity: 488

Merit: 37

Quote from: vrottenberg on November 10, 2018, 11:14:10 AM

Hi dev,
How to make --config work with .bat file pools?
Example:
miner.exe --algo 144_5 --pers BgoldPoW --server eu.btgpool.pro --port 1445 --user GZdx44gPVFX7GfeWXA3kyiuXecym3CWGHi.rig0 --pass x --pec --config pools.txt

when I specified pools in .bat file, they do not work in the config pools.txt

it is necessary that the main pool was in the command line, and backup pools in the configuration file...
thanks

Hi,
archive with miner contains sample configuration file ("sample_config.txt"), please check it.
You have to add [server] section for each your pool.

vrottenberg

jr. member

Activity: 31

Merit: 2

Quote from: Zminer777 on November 09, 2018, 01:21:10 PM

GMiner v1.08 available for download

v1.08
+ added support of configuration files (--config option)

Hi dev,
How to make --config work with .bat file pools?
Example:
miner.exe --algo 144_5 --pers BgoldPoW --server eu.btgpool.pro --port 1445 --user GZdx44gPVFX7GfeWXA3kyiuXecym3CWGHi.rig0 --pass x --pec --config pools.txt

when I specified pools in .bat file, they do not work in the config pools.txt

it is necessary that the main pool was in the command line, and backup pools in the configuration file...
thanks

umine

full member

Activity: 405

Merit: 136

Quote from: Zminer777 on November 09, 2018, 01:21:10 PM

GMiner v1.08 available for download

In comparison of EWBF miner we can see about 15-16% performance increase. Power consumption is the same. Avg efficiency increased from 0.33 to 0.38 Sol/W

EWBF v0.6 144_5 algo

GMiner v1.08 144_5 algo

Johnjay06

newbie

Activity: 93

Merit: 0

I'm always afraid of a backdoor in these miners, but this one seems good.

luckydoky

jr. member

Activity: 231

Merit: 1

Quote from: Zminer777 on November 09, 2018, 01:21:10 PM

GMiner v1.08 available for download

v1.08
+ minor performance enhancements
+ added support of configuration files (--config option)
+ minor bug fixes

Nice, gonna try it right away.

Zminer777

member

Activity: 488

Merit: 37

Quote from: abudfv2008 on November 09, 2018, 01:43:49 PM

Is there any purpose of running 2 miner.exe processes? If another process is some kind of watchdog - maybe it's better to call it different name?

In watchdog mode parent miner process start child miner process.
Task manager just display filename of executable, It isn't possible to change name programmatically.

abudfv2008

full member

Activity: 728

Merit: 106

Quote from: Zminer777 on November 09, 2018, 01:21:10 PM

GMiner v1.08 available for download

Is there any purpose of running 2 miner.exe processes? If another process is some kind of watchdog - maybe it's better to call it different name?

Zminer777

member

Activity: 488

Merit: 37

GMiner v1.08 available for download

v1.08
+ minor performance enhancements
+ added support of configuration files (--config option)
+ minor bug fixes

Performance on stock GPU settings:
Equihash 144,5:
Palit GTX 1070 Ti JetStream 8GB ~59 Sol/s
MSI GTX 1080 SEA HAWK EK X 8GB ~61 Sol/s
EVGA GTX 1080 Ti Founders Edition 11GB ~84 Sol/s
Gigabyte 1080 Ti AORUS Waterforce WB Xtreme Edition 11GB ~89 Sol/s

Equihash 192,7:
Palit GTX 1070 Ti JetStream 8GB ~33 Sol/s
MSI GTX 1080 SEA HAWK EK X 8GB ~35 Sol/s
EVGA GTX 1080 Ti Founders Edition 11GB ~48 Sol/s
Gigabyte 1080 Ti AORUS Waterforce WB Xtreme Edition 11GB ~50 Sol/s

Join GMiner group in telegram: https://t.me/gminer_equihash

Download links:
Linux x64 https://mega.nz/#F!HeIHzYDI!Rf3-qpxMjAkeQ7SDeeN2rw
Windows x64 https://mega.nz/#F!2GQl0AaR!_YzlNiVNNOUbEqYwz40E8A

topteam

newbie

Activity: 157

Merit: 0

Please add --templimit same for all card (not for every one)
Thanks

merowing

newbie

Activity: 3

Merit: 0

Hi, thanks for the great miner!
BTW Awesom doesn't recognize specific mining pool (MiningPoolHub in my case), as a result, it's not possible to define pool coin.
Restart wasn't helpful. Are there some mistakes in API possible?

Topic: GMiner v3.24 Ergo+KASPA+ZIL/KAWPOW/Equihash/Cortex - page 130. (Read 306469 times)