Topic: GMiner v3.24 Ergo+KASPA+ZIL/KAWPOW/Equihash/Cortex - page 39. (Read 306650 times)

I activated the Temp Limit with -t xx xx xx xx xx xx xx.
It works great and shuts down only the GPU who reached the temp limit.
Can you set a command for the time to restart? For me it looks like that the GPU
stops mining and restarts in ?30 min?.

When running Gminer2.09 in docker nvidia/cuda:10.1-cudnn7-runtime-ubuntu16.04 I get an error "Failed to initialize NVML"

Is there a way arround this?

https://github.com/develsoftware/GMinerRelease/releases

Link to latest Kawpow Gminer please? Nicehash cant update it properly though.

use this :
disk-expand >>> to use all your ssd capacity
apt-get update >>> update ubuntu
apt install nvidia-cuda-toolkit >>> to solve the problem

Same here with 1080 Ti Rigs. Just one example, but looks similar on all rigs:

4.63 H/s reported by Gminer for the last 24h; 0 rejects
4.21 H/s real hashrate @ Nicehash for the last 24h

Gminer 2.09, GTX1070s, Cuckatoo32, Nicehash servers; the actual hashrate reported by the pool is 15-20% lower than that reported by gminer itself despite nearly zero rejected shares.

gminer 2.09 on nicehash

Others miners works fine

Try T-Rex and reduce OC.

20200508 06:42:26 GPU #3: Gainward RTX 2080 - 26.41 MH/s, [T:38C, P:156W, F:0%, E:173kH/W]
20200508 06:42:26 Shares/min: 2.382 (Avr. 5.175); total rejected: 5.514%, Avr.Power: 612W, Avr.Efficiency: 173kH/W
20200508 06:42:26 Uptime: 1 day 7 hours 57 mins 3 secs | Algo: kawpow | T-Rex v0.15.3
20200508 06:42:54 [ OK ] 9922/10501 - 105.65 MH/s, 16ms
20200508 06:42:59 [ OK ] 9923/10502 - 105.65 MH/s, 15ms
20200508 06:43:22 [ OK ] 9924/10503 - 105.68 MH/s, 16ms
20200508 06:43:45 [ OK ] 9925/10504 - 105.68 MH/s, 16ms
20200508 06:43:49 [ OK ] 9926/10505 - 105.68 MH/s, 15ms
20200508 06:43:49 GPU #0: ASUS RTX 2080 - 27.38 MH/s, [T:40C, P:150W, F:0%, E:177kH/W]
20200508 06:43:49 GPU #1: MSI RTX 2080 - 25.60 MH/s, [T:38C, P:156W, F:0%, E:166kH/W]
20200508 06:43:49 GPU #2: MSI RTX 2080 - 26.27 MH/s, [T:38C, P:149W, F:0%, E:175kH/W]
20200508 06:43:49 GPU #3: Gainward RTX 2080 - 26.44 MH/s, [T:38C, P:154W, F:0%, E:173kH/W]
20200508 06:43:49 Shares/min: 2.248 (Avr. 5.174); total rejected: 5.512%, Avr.Power: 612W, Avr.Efficiency: 173kH/W
20200508 06:43:49 Uptime: 1 day 7 hours 58 mins 26 secs | Algo: kawpow | T-Rex v0.15.3
20200508 06:44:01 [ OK ] 9927/10506 - 105.69 MH/s, 15ms

Mining KawPow on NiceHash and after a while (after 15-20 minutes), most shares will be rejected with "Share above target". It doesnt matter which GPU, tested on 2070, 2080 Ti, 1070, 1080, 1080 Ti...

cant mine kawpow algo on Linux(HiveOS platform), always get a error: cant initialize/find NVRTC lib.
Any suggestion, how and where i can get this NVRTC lib.
NVIDIA Driver ver. 440.59

Any plans to include KAWPOW por AMD Cards?

2.09 kawpow + nicehash - sometimes working fine, then just giving errors until restarted:

02:54:48 Uptime: 0d 00:03:00 Electricity: 0.027kWh
02:54:49 New Job: 00000000264f2fe9 Difficulty: 512.00M
02:54:57 GPU1 Share Accepted 71 ms
02:54:59 GPU1 Share Accepted 69 ms
02:55:15 GPU1 Share Accepted 69 ms
+------+----+-----------+------+-----+-----------+
|  GPU  Temp    Speed    Shares Power Efficiency |
+------+----+-----------+------+-----+-----------+
|  GPU0 70 C  22.45 MH/s    8/1 279 W 80.47 KH/W |
|  GPU1 67 C  22.44 MH/s   14/0 275 W 81.59 KH/W |
|             44.89 MH/s   22/1 554 W 81.02 KH/W |
+------+----+-----------+------+-----+-----------+
02:55:18 Uptime: 0d 00:03:30 Electricity: 0.032kWh
02:55:18 GPU0 Share Rejected: Share above target.
02:55:25 GPU0 Share Rejected: Share above target.
02:55:29 GPU1 Share Rejected: Share above target.
02:55:29 GPU1 Share Rejected: Share above target.
02:55:32 GPU0 Share Rejected: Share above target.
02:55:38 GPU1 Share Rejected: Share above target.
02:55:44 New Job: 00000000264f8409 Difficulty: 512.00M
+------+----+-----------+------+-----+-----------+
|  GPU  Temp    Speed    Shares Power Efficiency |
+------+----+-----------+------+-----+-----------+
|  GPU0 70 C  22.46 MH/s    8/4 278 W 80.79 KH/W |
|  GPU1 67 C  22.45 MH/s   14/3 275 W 81.62 KH/W |
|             44.91 MH/s   22/7 553 W 81.20 KH/W |
+------+----+-----------+------+-----+-----------+
02:55:48 Uptime: 0d 00:04:00 Electricity: 0.036kWh

RTX 2080s

What GPU? 1080ti? Thanks

After 10 hours i can not confirm high rejects.


05:56:53 New Job: 2322170655 Difficulty: 1
05:57:02 GPU2 Share Accepted 18 ms
05:57:08 New Job: 2322172694 Difficulty: 1
05:57:12 New Job: 2322174859 Difficulty: 1
+------+----+---------+--------+------+-----+-----------+
| GPU Temp Speed Fidelity Shares Power Efficiency |
+------+----+---------+--------+------+-----+-----------+
| GPU0 38 C 0.55 G/s 0.98 428/1 135 W 0.00 G/W |
| GPU1 38 C 0.54 G/s 0.99 404/0 134 W 0.00 G/W |
| GPU2 37 C 0.53 G/s 1.03 405/0 131 W 0.00 G/W |
| GPU3 38 C 0.56 G/s 1.04 449/0 133 W 0.00 G/W |
| 2.18 G/s 1.01 1686/1 533 W 0.00 G/W |

Just tried 2.09 with C32. Average load on system is 4x more compared to C31.
Also, getting ~10% rejected shares compared to ~2.5% with C31 on the same pool.

G4400  with 6 GPUs around 9% CPU load.
G4560T with 4 GPUs around 3% CPU load.

Still high cpu use age. Still high shares. Now has stability problems, lowered clocks seem to help. Please fix issues.

2.09 was still not stable at my old settings.
Might got the problem - GMiner 2.09 uses much less power, so the core goes to the roof.

Using Simplemining i reduced the power on my 2080s to around 135 Watt.
Added +150 to the Core and 1250 to the Ram.
This results in core around 1600 to 1700 for only 135 Watt! and 0.550 G/s.
Didnt check if 120 Watt could be done too, might do it later.