GMiner v2.07 available for download
v2.07
+ improved cuckatoo32 performance (up to +20% dependent on GPU and OC mode)
Telegram group: https://t.me/gminer_equihash
Telegram beta test group: https://t.me/gminer_beta
Download links:
GitHub: https://github.com/develsoftware/GMinerRelease/releases/tag/2.07
Topic: GMiner v3.24 Ergo+KASPA+ZIL/KAWPOW/Equihash/Cortex - page 41. (Read 307024 times)
Gminer c32 solver is still on it's alpha release that was first published on February 19th. There have been no updates since for c32, yet c32 tops the wtm charts for most profitable algo, and will continue to gain more share of the hashrate as c29 and c31 are permanently phased out. Same unresolved issues persist: Gminer mining instance restarts on c32 too often. Half my rigs can't make it past 30 minutes before the program stops then restarts, a few rigs can't make it past 2 minutes without restarting, and a few (< 10%) appear as stable as c31 was. On c31, could go weeks before any mining program restarted, a very mature and reliable miner for c31, but needs stability improvement for c32 please.
All my rigs have 256GB to 512GB Samsung 860 Pro SSDs with large swap files and ample free space and latest firmware revision (I free up space periodically to stay optimized), Corsair Dominator 32GB (2x16GB) of 3200 MHz DDR4, i7 8700T to i9 9900T CPUs, and most motherboards are ASUS H370 Mining Master, latest bios v1406. There aren't any weak links hardware wise. I'm suspecting the miner program since I've seen zero revisions for c32 improvements from the Gminer notes since c32 support was added.
All my rigs have 256GB to 512GB Samsung 860 Pro SSDs with large swap files and ample free space and latest firmware revision (I free up space periodically to stay optimized), Corsair Dominator 32GB (2x16GB) of 3200 MHz DDR4, i7 8700T to i9 9900T CPUs, and most motherboards are ASUS H370 Mining Master, latest bios v1406. There aren't any weak links hardware wise. I'm suspecting the miner program since I've seen zero revisions for c32 improvements from the Gminer notes since c32 support was added.
Please fix C32 solver. Terrible cpu usage and sky high stale shares. 
Hi all,
Perhaps an odd question. I tried to solo mine BFC against my own node both running locally and vps too. BFC is a simple BTC clone running the forked bitcoind using cuckaroo algorithm. Unfortunately I wasn't able to connect gminer to the node. I set the rpcuser, rpcpassword and rpcport in the node's config file. There are BFC pools to which gminer connects without any issue. Could you help me with making it work?
Perhaps an odd question. I tried to solo mine BFC against my own node both running locally and vps too. BFC is a simple BTC clone running the forked bitcoind using cuckaroo algorithm. Unfortunately I wasn't able to connect gminer to the node. I set the rpcuser, rpcpassword and rpcport in the node's config file. There are BFC pools to which gminer connects without any issue. Could you help me with making it work?
i am not understand, why you ignore C31 hashrate drop in Gminer versions after 1.96 
The best hashrate on C31 for RTX2080TI is still on GMiner ver. 1.96
Drop is around 0.5 H/s for 8 GPU rig. Please check this issue.
The best hashrate on C31 for RTX2080TI is still on GMiner ver. 1.96
Drop is around 0.5 H/s for 8 GPU rig. Please check this issue.
Im getting a malformed server message when trying to mine eth/hns on mph
try
--algo grin31 --server grincuckatoo31.eu.nicehash.com --port 3372 --user BTCWallet.Rigname --pass x --api 3333
--algo grin31 --server grincuckatoo31.eu.nicehash.com --port 3372 --user BTCWallet.Rigname --pass x --api 3333
Because it does not add option --Pers (MWC) ??
There seems to be an error in C32 Algo.
Rig:
4 x 2080
CPU 4560T (2 Cores, 4 Threads)
16 GB RAM
Load starts at around 2% and rises constantly. All few seconds by around 0.1%.
I didnt wait to check where and if it ends.
Mining C31 my CPU load is under 1.5%.
Mining MTP (other Miner) my CPU load is around 2%.
I didnt check other Rigs (1080 1080ti...) and other CPUs, but should be the same.
Please check it.
Rig:
4 x 2080
CPU 4560T (2 Cores, 4 Threads)
16 GB RAM
Load starts at around 2% and rises constantly. All few seconds by around 0.1%.
I didnt wait to check where and if it ends.
Mining C31 my CPU load is under 1.5%.
Mining MTP (other Miner) my CPU load is around 2%.
I didnt check other Rigs (1080 1080ti...) and other CPUs, but should be the same.
Please check it.
C31 works great but just tried C32 and cpu usage went to the roof. Please do cpu optimization for C32 otherwise it is unusable on lower cpus.
can you increase the share rate for the cuckatoo31 solver?
+++
what is the best version for grincuckarood29 please
can you increase the share rate for the cuckatoo31 solver?
try
--algo grin31 --server grincuckatoo31.eu.nicehash.com --port 3372 --user BTCWallet.Rigname --pass x --api 3333
--algo grin31 --server grincuckatoo31.eu.nicehash.com --port 3372 --user BTCWallet.Rigname --pass x --api 3333
Good day! What is the right .bat string for mining grin29 (cuckaroo29m) on nicehash server? I could not started both grin29 and grin31 on my gtx1070 (Win7 SP1, x64) for mining on Nicehash.
qitmeer (PMEER) is good to mine?
v2.05
+ improved performance for qitmeer (up to +30%)
+ decreased CPU usage for qitmeer (more than twice)
On my 1070 GPU, the performance gain for qitmeer is only 7.5%. Who has more and how to achieve?
how much hash you get from 1070? + improved performance for qitmeer (up to +30%)
+ decreased CPU usage for qitmeer (more than twice)
On my 1070 GPU, the performance gain for qitmeer is only 7.5%. Who has more and how to achieve?
GMiner v2.06 available for download
v2.06
+ improved miner stability on qitmeer
Telegram group: https://t.me/gminer_equihash
Telegram beta test group: https://t.me/gminer_beta
Download links:
GitHub: https://github.com/develsoftware/GMinerRelease/releases/tag/2.06
v2.06
+ improved miner stability on qitmeer
Telegram group: https://t.me/gminer_equihash
Telegram beta test group: https://t.me/gminer_beta
Download links:
GitHub: https://github.com/develsoftware/GMinerRelease/releases/tag/2.06
v2.05
+ improved performance for qitmeer (up to +30%)
+ decreased CPU usage for qitmeer (more than twice)
On my 1070 GPU, the performance gain for qitmeer is only 7.5%. Who has more and how to achieve?
+ improved performance for qitmeer (up to +30%)
+ decreased CPU usage for qitmeer (more than twice)
On my 1070 GPU, the performance gain for qitmeer is only 7.5%. Who has more and how to achieve?
Do you have a discord channel? thx
Trying to set the intensity like -i 10
Jump to: