Topic: [GPUC] GPU Coin | Mandatory Wallet Update - page 194. (Read 421421 times)
@ vesperwillow What i meant is that you will be wasting your time mining for this as you will be in a que as with asic miners and sha miners because there is soo many people mining this coin amd the peoplpe that have created the coin can only supply a certain amount of gpu's a month as there are soo many other suppliers and on-line stores out there with oreders from the factories that can only make soo many cards a month!
I'm currently mining with a single 7950 and getting 280kH/s or so but the pool is only showing 30 kH/s??
Without more info, there's not much anybody can do except recommend some settings. How long have you been mining on the pool at that speed? Are you getting hardware errors? What's your accepted:rejected ratio?
I have two 7950 cards running @ ~ 343 Kh/s each. My settings can be found here:
https://bitcointalksearch.org/topic/m.5597962
I copied your conf file, put my information, and it's giving me the best kh/s I've gotten, by far. Both my GPUs are also working. Very nice.
I'm currently mining with a single 7950 and getting 280kH/s or so but the pool is only showing 30 kH/s??
Code:
color 0A
setx GPU_MAX_ALLOC_PERCENT 200
setx GPU_USE_SYNC_OBJECTS 1
del *.bin
vertminer.exe -o stratum+tcp://gpuc.allpoolz.com:8080 -u jollyriffic.1 -p x -I 19 -w 256 --thread-concurrency 19712 -g 1 --gpu-powertune 20
setx GPU_MAX_ALLOC_PERCENT 200
setx GPU_USE_SYNC_OBJECTS 1
del *.bin
vertminer.exe -o stratum+tcp://gpuc.allpoolz.com:8080 -u jollyriffic.1 -p x -I 19 -w 256 --thread-concurrency 19712 -g 1 --gpu-powertune 20
getting on average 320kh with my 7950 with those settings.
so far only had 1 hw error.
have core at 1100 and ram at 1500.
i've read countless times that ram speed doesn't matter for -n but i'm not changing my settings.
may have your voltage too low to support that intensity. that was my problem anyway.
I'm currently mining with a single 7950 and getting 280kH/s or so but the pool is only showing 30 kH/s??
Without more info, there's not much anybody can do except recommend some settings. How long have you been mining on the pool at that speed? Are you getting hardware errors? What's your accepted:rejected ratio?
I have two 7950 cards running @ ~ 343 Kh/s each. My settings can be found here:
https://bitcointalksearch.org/topic/m.5597962
Hey, it's working.
I tried these settings.
I just changed the memclock from 1500 to 900
I'm getting 132 kh/s, and I imagine that's low for two 290x, but I don't care. I'm just glad it's working.
Thank you for everyone who helped. I honestly truly appreciate it.
Someone may have already asked but how much dram memory do you have installed? Also try removing the -d 0 tag from your config file If you have onboard graphics go into the device manager and disable it uless your using it to run your monitor.I tried these settings.
Code:
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_USE_SYNC_OBJECTS 1
COLOR 0A
vertminer.exe --scrypt-vert -o stratum+tcp://gpu.oakpool.com:3355 -u j23a.1 -p x -I 12 --thread-concurrency 6000 -d 0 --
gpu-platform 1 -w 256 -I 13 --gpu-engine 1000 --gpu-memclock 900 --thread-
concurrency 8193 -g 2 --auto-fan --lookup-gap 2
setx GPU_USE_SYNC_OBJECTS 1
COLOR 0A
vertminer.exe --scrypt-vert -o stratum+tcp://gpu.oakpool.com:3355 -u j23a.1 -p x -I 12 --thread-concurrency 6000 -d 0 --
gpu-platform 1 -w 256 -I 13 --gpu-engine 1000 --gpu-memclock 900 --thread-
concurrency 8193 -g 2 --auto-fan --lookup-gap 2
I just changed the memclock from 1500 to 900
I'm getting 132 kh/s, and I imagine that's low for two 290x, but I don't care. I'm just glad it's working.
Thank you for everyone who helped. I honestly truly appreciate it.
I have 6 GB.
Edit: I thought you said Damn Memory. But I have 6gb of ram, and plus what the 290x has, which is 6gb in all I think for two.
Ive struggeled ALL day with different miners and other poblems regarding NFactor and scrypt-jane. Everything resulted in a driver crash, black screen, BSOD etc.. you name it
I then tried different types of drivers and versions which also didnt help at all. I have 5 R9 290 running in two machines, one with 24gb ram and one with 6. Both ended up with the same problem whatsoever.
I came to a conclution that ive been pushing it too hard... you might try this
{
"pools" : [
{
"url" : "http://x-pool.org:3334",
"user" : "j.2",
"pass" : "x"
}
]
,
"intensity" : "17",
"worksize" : "256",
"kernel" : "zuikkis",
"lookup-gap" : "2",
"thread-concurrency" : "20841",
"gpu-threads" : "1",
"gpu-engine" : "1000",
"gpu-memclock" : "1300",
"gpu-memdiff" : "0",
"gpu-powertune" : "10",
"temp-cutoff" : "95",
"temp-overheat" : "93",
"temp-target" : "87",
"auto-fan" : true,
"nfactor" : "11",
"kernel-path" : "/usr/local/bin"
}
Using http://sgminerwindows.com/sgminer-nfactor-zuikkis.php
Thanks. I'll try it in an hour or so. Right now my head is overwhelmed, and will try to lay down for a little.
or get someone to do it who 'knows' what they are doing.
I ran it with the settings that you gave me and this is what I got: https://dl.dropboxusercontent.com/u/4012234/sgm.PNG
There has to be a reason, just can't think of any. I've troubled shooted this hard, including reinstalling the OS. I should mentioned that last week, during the 1st GPUCoin launch, Vertminer completely messed up my GPUs for like an hour. Not even restarting it would fix it, and the computer would go blank. So perhaps that's related.
I read that Vertminer could mess up GPUs. I guess because of the voltage.
Which pool here are base in Europe?
CrunchHarder pools are UK/EU based https://gpu.crunchharder.net. We've also got a dedicated support helpdesk https://helpdesk.crunchharder.net and we actively welcome and support new miners.
Please add http://gpu.dogemoon.com to the pool list. Not sure why it was taken off.
No offence guys. But you would have thought that if this coin had launched on sat morning we might not be mining for 1 coin per day right now.
Unless that was only decided last minute.
Unless that was only decided last minute.
in solo mode, who will start? and at what rate?
http://GPU.leetpools.com
DDOS PROTECTED
USA
PROP/VARDIFF
0% FEE PROMO
POOL'S Running Like A Champ:
Come chill in IRC #Leetpools on quakenet
Time to start mining like a boss.
DDOS PROTECTED
USA
PROP/VARDIFF
0% FEE PROMO
POOL'S Running Like A Champ:
Come chill in IRC #Leetpools on quakenet
Time to start mining like a boss.
Which pool here are base in Europe?
Anyone know what the n-factor is set to? Is it 11 like vertcoin or something else. Only asking since the newer sgminer that supports n-scrypt now allows us to set it and I would like to have it match.
yes, same algo as vert, so, set n=11 in sgminer fork
waltsmith
Thanks for the info.
Spread the hash rate and come on over and mine at the CrunchHarder GPUCoin pool.
https://gpu.crunchharder.net
https://crunchharder.net/images/logo-sm.jpg
Our dedicated Support Helpdesk is https://helpdesk.crunchharder.net and we actively welcome and
support both novice and experienced miners!
https://gpu.crunchharder.net
https://crunchharder.net/images/logo-sm.jpg
Our dedicated Support Helpdesk is https://helpdesk.crunchharder.net and we actively welcome and
support both novice and experienced miners!
URL: http://www.xhash.net
Pool info:
- VARDIFF / Stratum / Prop
- 0% fee for all our pools
- 1% default donation (removable)
UP and Running
http://ultrapool.org/ultralogosmall.png
PROP payout!
Fast, reliable server
DDOS Protected
Trusted Pool
Best MPOS Web Interface: See Below
http://gpuc.ultrapool.org
Up NOW and hashing blocks! Join us today.
PROP payout!
Fast, reliable server
DDOS Protected
Trusted Pool
Best MPOS Web Interface: See Below
http://gpuc.ultrapool.org
Up NOW and hashing blocks! Join us today.
You are on block 1202?
O.o
That is a screenshot from the last launch.
Announcing another p2pool node:
http://gpuc.coinpools.de:9404/static/
Location Germany, 0.5% fee
Just waiting for your hash
http://gpuc.coinpools.de:9404/static/
Location Germany, 0.5% fee
Just waiting for your hash
I'm currently mining with a single 7950 and getting 280kH/s or so but the pool is only showing 30 kH/s??
Code:
color 0A
setx GPU_MAX_ALLOC_PERCENT 200
setx GPU_USE_SYNC_OBJECTS 1
del *.bin
vertminer.exe -o stratum+tcp://gpuc.allpoolz.com:8080 -u jollyriffic.1 -p x -I 19 -w 256 --thread-concurrency 19712 -g 1 --gpu-powertune 20
setx GPU_MAX_ALLOC_PERCENT 200
setx GPU_USE_SYNC_OBJECTS 1
del *.bin
vertminer.exe -o stratum+tcp://gpuc.allpoolz.com:8080 -u jollyriffic.1 -p x -I 19 -w 256 --thread-concurrency 19712 -g 1 --gpu-powertune 20
getting on average 320kh with my 7950 with those settings.
so far only had 1 hw error.
have core at 1100 and ram at 1500.
i've read countless times that ram speed doesn't matter for -n but i'm not changing my settings.
Not Troll! just trying to make sense of one coin promising to supply all of the worlds mining community! free loaders will see this as an opportunity to get something for nothing whereas you will be wasting your precious mining time.
last time i checked, miners dont mine for free, we pay bills, pay for parts, pay pool and exchange fees. when the backend shop comes online, we will pay for gpu's with hard earned coin. mining isnt simply setting and forgetting, i spend hours maintaining, tweaking, and upgrading my rig, you must be overlooking these facts for some reason.Especially if you have a farm, the power bill is significant. Nothing is free for the non-privileged.
Not Troll! just trying to make sense of one coin promising to supply all of the worlds mining community! free loaders will see this as an opportunity to get something for nothing whereas you will be wasting your precious mining time.
last time i checked, miners dont mine for free, we pay bills, pay for parts, pay pool and exchange fees. when the backend shop comes online, we will pay for gpu's with hard earned coin. mining isnt simply setting and forgetting, i spend hours maintaining, tweaking, and upgrading my rig, you must be overlooking these facts for some reason. Jump to: