[GROUP BUY WORLDWIDE]BTMine v1 Miner 200GH/s BTC 2.4 - page 32.

Professoruss

member

Activity: 64

Merit: 10

Just opened one of the boxes up, looks like i got some free PSU's at least for this unit. Should I just toss them? Connections look ok inside.

mtnminer

sr. member

Activity: 294

Merit: 250

CGMiner 3.10.0 is having problems connecting to some pools
https://www.btcguild.com/index.php?page=home

Mtnminer

Quote from: Pistachio on January 21, 2014, 07:58:58 PM

Quote from: slavo on January 21, 2014, 07:33:19 PM

someone knows how to mine by pluggin the usb to my laptop ? Version of cgminer / .bat to use ?

i pm'd btmine, if they can ship the defective part and I can mine connected to a computer I'll be happy.

Are you sure it's not your PSU? I had the same screen issue when I tried to run it from a blown PSU. The intro screen popped up and then went dead. Does the loud fan come on?

If the FPGA module is not working, use a laptop and control it with cgminer via USB. cgminer 3.9.0 should work fine.

Pistachio

legendary

Activity: 1456

Merit: 1000

Quote from: slavo on January 21, 2014, 07:33:19 PM

someone knows how to mine by pluggin the usb to my laptop ? Version of cgminer / .bat to use ?

i pm'd btmine, if they can ship the defective part and I can mine connected to a computer I'll be happy.

Are you sure it's not your PSU? I had the same screen issue when I tried to run it from a blown PSU. The intro screen popped up and then went dead. Does the loud fan come on?

If the FPGA module is not working, use a laptop and control it with cgminer via USB. cgminer 3.9.0 should work fine.

miaviator

donator

Activity: 686

Merit: 519

It's for the children!

Quote from: slavo on January 21, 2014, 07:33:19 PM

someone knows how to mine by pluggin the usb to my laptop ? Version of cgminer / .bat to use ?

i pm'd btmine, if they can ship the defective part and I can mine connected to a computer I'll be happy.

Why not let someone team viewer in and help you.

robbcarpdm

member

Activity: 89

Merit: 10

Well I had a very good tech guy get my miners online.... going to pay him to watch my farm.

They are bouncing betweeen 200 -240 will see the avg after 24 hrs.

NO OC ......I am stopping by microcenter tonight to a bunch of heatsink supplies etc....and will let the units burn in before I take the chances the rest you like to do.

I dont want to lose my warranty until I know these are not the pieces of crap the rest of you got.....laughing,

Cheers,

udt89

member

Activity: 98

Merit: 10

12 days since order and not a thing.

This thing arrives with anything DOA I'm filing a claim. Screw them

slavo

hero member

Activity: 784

Merit: 500

someone knows how to mine by pluggin the usb to my laptop ? Version of cgminer / .bat to use ?

i pm'd btmine, if they can ship the defective part and I can mine connected to a computer I'll be happy.

slavo

hero member

Activity: 784

Merit: 500

already done watch last page

nothing happens that's all, the connection miner/laptop is working fine, just no interface.

robbcarpdm

member

Activity: 89

Merit: 10

Quote from: slavo on January 21, 2014, 06:15:32 PM

in the browser i see

LuCI - Lua Configuration Interface

then

problem, can't reach page 192.168.0.55. (or sth like that i have a french version)

It seems as a defective firmware then no ? I can see every piece. the blades can connect the laptop, and the laptop sees the wifi and eth connection from the miner.

any reboot button ? or a way to flash firmware from a computer ?

For give me if you are past this but...... have you tried switching your router so that it is 192.168.0.1 so that the nodes are in the same network?

Your first post you have 192.168.1.1 for your router but the device is 192.168.0.174

IE the 1 and 0 need to match I think

babaji.ca

full member

Activity: 184

Merit: 100

it's official....it's the.....

FarmerOak

full member

Activity: 231

Merit: 100

Quote from: sikke on January 21, 2014, 06:35:00 PM

Quote from: twib2 on January 21, 2014, 05:49:53 PM

1) Sorry, I should have described the location better, but perhaps you don't have any modules with FUSE1 silk-screened? All but one of mine did, but I think I got an early version. I did not take pics, but using another user's pics I'll point out where that single fuse is on his dual-fuse (newer?) version. Top left component right next to far left large capacitor, the fuses in parallel which don't seem to be a problem (so far) are marked with a single "P". At that same location on the boards with FUSE1, there will be a single FUSE1 fuse, with two other small components just below it. Hope that helps.

Thanks man! I was waiting this info. I just replaced 2x stock psu with two Thermaltake 850w 70A single rail psu and overclocked to 1500. i will do shorting of thoes fuses tomorrow.

Two Thermaltake 850w with 5 cold chips not hashing
1400 stock 878w
1500 OC 947w

it's hashing 222.64 GH/s to BTCGuild with 5 cold chips. Temps are no issue my location is cold.

Seems like most of us have at least 1 set of 5 chips that are dead (I don't mean the FUSE1 issue). I hope we can come up with a solution that doesn't involve reflowing the whole board... or a way to get BTmine to send us all an additional module to make up for the busted ones. I'd even settle for buying one at a reasonable cost.

sikke

sr. member

Activity: 504

Merit: 250

Quote from: twib2 on January 21, 2014, 05:49:53 PM

1) Sorry, I should have described the location better, but perhaps you don't have any modules with FUSE1 silk-screened? All but one of mine did, but I think I got an early version. I did not take pics, but using another user's pics I'll point out where that single fuse is on his dual-fuse (newer?) version. Top left component right next to far left large capacitor, the fuses in parallel which don't seem to be a problem (so far) are marked with a single "P". At that same location on the boards with FUSE1, there will be a single FUSE1 fuse, with two other small components just below it. Hope that helps.

Thanks man! I was waiting this info. I just replaced 2x stock psu with two Thermaltake 850w 70A single rail psu and overclocked to 1500. i will do shorting of thoes fuses tomorrow.

Two Thermaltake 850w with 5 cold chips not hashing
1400 stock 878w
1500 OC 947w

it's hashing 222.64 GH/s to BTCGuild with 5 cold chips. Temps are no issue my location is cold.

slavo

hero member

Activity: 784

Merit: 500

ok but how can i ssh Grin

no i'm dead. It's connecting. Just receiving nothing.

mtnminer

sr. member

Activity: 294

Merit: 250

Here are a couple of commands that might help

/etc/init.d/uhttpd start

then enter

/etc/init.d/uhttpd enable

Mtnminer

mtnminer

sr. member

Activity: 294

Merit: 250

Just a stab in the dark, clear your browsers cache & cookies and try connecting again

Mtnminer

Quote from: slavo on January 21, 2014, 06:15:32 PM

in the browser i see

LuCI - Lua Configuration Interface

then

problem, can't reach page 192.168.0.55. (or sth like that i have a french version)

It seems as a defective firmware then no ? I can see every piece. the blades can connect the laptop, and the laptop sees the wifi and eth connection from the miner.

any reboot button ? or a way to flash firmware from a computer ?

Topic: [GROUP BUY WORLDWIDE]BTMine v1 Miner 200GH/s BTC 2.4 - page 32. (Read 97274 times)