Pages:

Author

Topic: [GROUP BUY WORLDWIDE]BTMine v1 Miner 200GH/s BTC 2.4 - page 30. (Read 97046 times)

sikke

sr. member

Activity: 504

Merit: 250

Quote from: slavo on January 22, 2014, 08:28:03 AM

so I am stuck with a bad setup for my wifi connection. I can access the interface without problem, but I can't apply change to cgminer.

I've got

Applying changes
Loading /etc/config/cgminer

with the wheel rolling forever...

Is that a port problem ? can anyone help ? Someone was talking about a teamviewer help, that'd be super cool

That will keep rolling forever if you setup pool server for CGminer and dont have working internet connection settings.
working Gateway
working DNS

cgminer will try to connect the pool but fails and wont startup.

you have to powercycle the unit, check you internet connection settings then try cgminer setup again. if yo u get that wheel rolling forever again your internet connection settings fail.
---> Fix internet first.

slavo

hero member

Activity: 784

Merit: 500

Quote from: slavo on January 21, 2014, 09:41:45 PM

Quote from: Pistachio on January 21, 2014, 08:58:58 PM

Quote from: slavo on January 21, 2014, 08:33:19 PM

someone knows how to mine by pluggin the usb to my laptop ? Version of cgminer / .bat to use ?

i pm'd btmine, if they can ship the defective part and I can mine connected to a computer I'll be happy.

Are you sure it's not your PSU? I had the same screen issue when I tried to run it from a blown PSU. The intro screen popped up and then went dead. Does the loud fan come on?

If the FPGA module is not working, use a laptop and control it with cgminer via USB. cgminer 3.9.0 should work fine.

yes the fan are ultra loud 80 or 100% i'd say.

ok i'll check this tomorrow and i'll ask another module.

thanks.

first, thanks everybody for help.

I found the reset button and it worked. I can now access the interface ! 18 hours later finally.

So I setup the wifi, that's currently working fine on a new ip.

Now my problem is :

[Firmware Version] => 20130821
cgminer-70bc62c
luci-d854edc+
cgminer-openwrt-packages-800cc58
Socket connect failed: Connection refused

any ideas ?

zoltrix

newbie

Activity: 29

Merit: 0

I have the same problem with three PSU... 630W thermaltake and 650W seasonic... Both of them are declared to have higher current on 12V then their "original" PSU. Second on, Seasonic 850W works without problems, it runs also fans, that's why I put stronger one

trinsic

full member

Activity: 205

Merit: 100

Unplug the power for the blades and see if it's a power issue. You can access the webUI without the blades plugged in.

grumpy619

sr. member

Activity: 546

Merit: 255

Quote from: sikke on January 22, 2014, 05:05:34 AM

Quote from: Professoruss on January 22, 2014, 12:00:47 AM

10-12 days seems about on par with what's been happening lately.

Can anyone confirm or deny if I should just trash the included PSU's in the US?

They are 170-230Vac you need 220v connection for them. See pictures few pages back.

They will work fine as long as they don't blow up.

Now New problem I purchased 2 coolmax PSU and they are rated for 750w @57a and for some reason they are not powering up when connected to the power distribution board. Does both PSU have to match for it to work? are the 2 6 pins are inter changeable? Not sure what's going wrong but it does not power up. I can do the paperclip trick and it runs but it will not power the blade. I'm halfway there just need to get power to the other blade. Anyone know this answer?

macher

newbie

Activity: 45

Merit: 0

Quote from: c2391118 on January 22, 2014, 05:02:43 AM

Quote from: macher on January 22, 2014, 04:28:15 AM

I received DHL number from 1/8/2014 order today... just 12 days later.

If not a secret, where are you from and you paid with Paypal or BTC?

Just received ems tracking number. But how track it?

Paid with BTC and from Europe.

DHL tracking number can be set on the dhl webpage.

Středa, Leden 22, 2014 Místo Čas Kusy
1 Přijata data o zásilce HONG KONG - HONG KONG 00:56

sikke

sr. member

Activity: 504

Merit: 250

Quote from: Professoruss on January 22, 2014, 12:00:47 AM

10-12 days seems about on par with what's been happening lately.

Can anyone confirm or deny if I should just trash the included PSU's in the US?

They are 170-230Vac you need 220v connection for them. See pictures few pages back.

c2391118

newbie

Activity: 58

Merit: 0

Quote from: macher on January 22, 2014, 04:28:15 AM

I received DHL number from 1/8/2014 order today... just 12 days later.

If not a secret, where are you from and you paid with Paypal or BTC?

Just received ems tracking number. But how track it?

macher

newbie

Activity: 45

Merit: 0

I received DHL number from 1/8/2014 order today... just 12 days later.

mchu168

full member

Activity: 188

Merit: 100

Need some help guys removing Fuse1 on my dead Avalon modules. I've confirmed that several of my Fuse1's are blown using a multimeter but I can't figure out how to remove them from the board. I tried to heat them up to melt the solder joints by using a solding iron, but they didn't budge. I also tried putting extra solder on the joints to improve heat transfer but instead made a big mess on the board.

Do I need to get a heat gun to remove these fuses or is there any other way to get them off with a solding iron?

Thanks... and sorry for the technical incompetency here.

hellohelo

newbie

Activity: 16

Merit: 0

this is the PSU model:
http://www.coolermaster-usa.com/product.php?product_id=3083

Quote from: grumpy619 on January 22, 2014, 03:37:28 AM

Quote from: hellohelo on January 22, 2014, 03:29:24 AM

Here's a screenshot:

http://s13.postimg.org/dg73xn1tv/avalon200gh.jpg

Running 2 Cooler Master 625w PSU. Might need to change the fan, running like a vacumm sound.

How many amps?

grumpy619

sr. member

Activity: 546

Merit: 255

Quote from: hellohelo on January 22, 2014, 03:29:24 AM

Here's a screenshot:

Running 2 Cooler Master 625w PSU. Might need to change the fan, running like a vacumm sound.

How many amps?

hellohelo

newbie

Activity: 16

Merit: 0

Here's a screenshot:

http://s13.postimg.org/dg73xn1tv/avalon200gh.jpg

Running 2 Cooler Master 625w PSU. Might need to change the fan, running like a vacumm sound.

grumpy619

sr. member

Activity: 546

Merit: 255

Quote from: FarmerOak on January 22, 2014, 03:10:37 AM

Quote from: grumpy619 on January 22, 2014, 03:00:06 AM

Quote from: grumpy619 on January 22, 2014, 02:57:47 AM

Okay that worked. How did you set it up so that it worked?

I changed the pool and got this

[Firmware Version] => 20131110
cgminer: 176747f
cgminer-openwrt-packages: 0e12b1b
luci: 346e3e7
Socket connect failed: Connection refused

Give it time to connect, it usually says this for the first 30-60sec. If it never connects, try opening the ports on your router of the pools you're connecting to (3333 or 3334 for example). Also make sure your credentials (worker/pass) are right

You were right. Its going now next to get a power supply that works. What are the recommendations?

FarmerOak

full member

Activity: 231

Merit: 100

Quote from: grumpy619 on January 22, 2014, 03:00:06 AM

Quote from: grumpy619 on January 22, 2014, 02:57:47 AM

Okay that worked. How did you set it up so that it worked?

I changed the pool and got this

[Firmware Version] => 20131110
cgminer: 176747f
cgminer-openwrt-packages: 0e12b1b
luci: 346e3e7
Socket connect failed: Connection refused

grumpy619

sr. member

Activity: 546

Merit: 255

Quote from: grumpy619 on January 22, 2014, 02:57:47 AM

Okay that worked. How did you set it up so that it worked?

I changed the pool and got this

[Firmware Version] => 20131110
cgminer: 176747f
cgminer-openwrt-packages: 0e12b1b
luci: 346e3e7
Socket connect failed: Connection refused

grumpy619

sr. member

Activity: 546

Merit: 255

Okay that worked. How did you set it up so that it worked?

sacskate

hero member

Activity: 994

Merit: 500

Np, I reset the tplink plugged it into my router. Then logged into my router and viewed devices and found the ip that way.

grumpy619

sr. member

Activity: 546

Merit: 255

Quote from: sacskate on January 22, 2014, 02:44:42 AM

Did you try 192.168.0.100? That's the default
I reset mine with the little button on the front and it just reset to that ip.

I will try that next Thank you.

sacskate

hero member

Activity: 994

Merit: 500

Did you try 192.168.0.100? That's the default
I reset mine with the little button on the front and it just reset to that ip.