[GROUP BUY WORLDWIDE]BTMine v1 Miner 200GH/s BTC 2.4 - page 46.

BeerPimp

member

Activity: 94

Merit: 10

Quote from: r1senfa17h on January 17, 2014, 09:51:49 AM

Quote from: BeerPimp on January 17, 2014, 09:34:42 AM

Quote from: r1senfa17h on January 17, 2014, 09:13:36 AM

I received confirmation through Skype that 7 of the 14 units I purchased on 1/9 (their time) shipped today and that the rest will ship tomorrow.

Do they have you listed on the batches for 1/08 or 1/09 on the front page?

They had me listed as 1/9, but I paid 1/8.

Thanks for the info. As stated it is the time difference. But in the end we just want info on when miners are shipping.

Pistachio

legendary

Activity: 1470

Merit: 1000

I don't have a good link but I can explain pretty quickly. Download cgminer and zadig (for windows). Plug in your Avalon directly from the main control board to your PC. Change the driver to winUSB. Click install and then run cgminer with
--avalon-options 115200:24:10:D:1500:55 from the command prompt.

mchu168

full member

Activity: 188

Merit: 100

Quote from: Pistachio on January 17, 2014, 10:08:17 AM

Quote from: Bhosted on January 17, 2014, 09:44:42 AM

Quote from: ?? on ??

I got cgminer to recognize the Avalon after the dead tp-link. The problem I am seeing is it keeps saying 32 miners idle and then sending reset sequence. It shows all zeros and no fan turns on.

Any ideas?

You need to add the following line to your bat file

--avalon-options 115200:24:10:D:1500:55

Thanks, got this working but the main problem turned out to still be power related. It really does need a single rail with 50+ amps. It turns out I killed up three power supplies that just couldn't hack it. I plugged in a 750w single rail with 63a and one module fired right up. Two more 750w ordered and hopefully this will fix this problem. This is what I ordered http://www.amazon.com/NZXT-Hale82N-240-Pin-Non-modular-np-1bn-0750a-us/dp/B008RK9V46/ref=sr_1_3?ie=UTF8&qid=1389971266&sr=8-3&keywords=nzxt+750.

Are you running this off the USB port? If so, could you point to a link on how to set this up. I would love to run this off a Minepeon. Sorry - feeling lazy today.

Pistachio

legendary

Activity: 1470

Merit: 1000

Quote from: Bhosted on January 17, 2014, 09:44:42 AM

Quote from: ?? on ??

I got cgminer to recognize the Avalon after the dead tp-link. The problem I am seeing is it keeps saying 32 miners idle and then sending reset sequence. It shows all zeros and no fan turns on.

Any ideas?

You need to add the following line to your bat file

--avalon-options 115200:24:10:D:1500:55

Thanks, got this working but the main problem turned out to still be power related. It really does need a single rail with 50+ amps. It turns out I killed up three power supplies that just couldn't hack it. I plugged in a 750w single rail with 63a and one module fired right up. Two more 750w ordered and hopefully this will fix this problem. This is what I ordered http://www.amazon.com/NZXT-Hale82N-240-Pin-Non-modular-np-1bn-0750a-us/dp/B008RK9V46/ref=sr_1_3?ie=UTF8&qid=1389971266&sr=8-3&keywords=nzxt+750.

madao

full member

Activity: 126

Merit: 100

For those of you still looking to get your machines, I just got off Skype with Jenny and had my January 9th order stricken.. Good news for anyone still looking to mine

jacoo

full member

Activity: 181

Merit: 100

Quote from: r1senfa17h on January 17, 2014, 09:51:49 AM

Quote from: BeerPimp on January 17, 2014, 09:34:42 AM

Quote from: r1senfa17h on January 17, 2014, 09:13:36 AM

I received confirmation through Skype that 7 of the 14 units I purchased on 1/9 (their time) shipped today and that the rest will ship tomorrow.

Do they have you listed on the batches for 1/08 or 1/09 on the front page?

They had me listed as 1/9, but I paid 1/8.

Time difference

r1senfa17h

full member

Activity: 226

Merit: 100

Quote from: BeerPimp on January 17, 2014, 09:34:42 AM

Quote from: r1senfa17h on January 17, 2014, 09:13:36 AM

I received confirmation through Skype that 7 of the 14 units I purchased on 1/9 (their time) shipped today and that the rest will ship tomorrow.

Do they have you listed on the batches for 1/08 or 1/09 on the front page?

They had me listed as 1/9, but I paid 1/8.

Bhosted

full member

Activity: 328

Merit: 100

Quote from: ?? on ??

I got cgminer to recognize the Avalon after the dead tp-link. The problem I am seeing is it keeps saying 32 miners idle and then sending reset sequence. It shows all zeros and no fan turns on.

Any ideas?

You need to add the following line to your bat file

--avalon-options 115200:24:10:D:1500:55

BeerPimp

member

Activity: 94

Merit: 10

Quote from: r1senfa17h on January 17, 2014, 09:13:36 AM

I received confirmation through Skype that 7 of the 14 units I purchased on 1/9 (their time) shipped today and that the rest will ship tomorrow.

Do they have you listed on the batches for 1/08 or 1/09 on the front page?

r1senfa17h

full member

Activity: 226

Merit: 100

I received confirmation through Skype that 7 of the 14 units I purchased on 1/9 (their time) shipped today and that the rest will ship tomorrow.

Gologuzan

full member

Activity: 161

Merit: 100

got mine tracking today. ordered on 07.

as i mentioned earlyer they have taken big bite, and now they are struggling with it. but on a way to win.

robbcarpdm

member

Activity: 89

Merit: 10

I get it

Paypal has most of their money if not all of it on freeze given the number for refunds....Paypal is making sure they dont get screwed.

So they have no working capital but our BTC.

Hence its gone.

If they ship the miners today then that works but they should be compensating everyone for two weeks o lost hashing.

On the poster with too bad chips.....the floating probably didnt go eveningly on the board and or simply you fried two chips......consider yourself luckiing if it was one FC you would be down much more than 20 gh

It probably doenst hurt for folks to check the thermal paste on heatsink given the rushed manufacturing.....any bear spots can be deadly now that they went from two heatsinks down to one.

Cheers

MaZo360

newbie

Activity: 14

Merit: 0

Quote from: MaZo360 on January 17, 2014, 01:30:10 AM

Quote from: sailem09 on January 17, 2014, 01:18:45 AM

Jenny is awesome ! 1-8-14 orders will ship out today there time apparently tracking will be available in 24 hours.

now is 2014-01-17 13:53,you will receive a ship number at about 2014-01-18 14:00

I have asked about the status of my 8/1 order yesterday, and was told it might still be in HK for some days. Email contact when very smooth until I asked for a refund (PayPal). Yet to hear back.

I'd be fine if I can be sure I get the miner within a few days, but I'm a bit fed up with the false promises / lack of communication.

Yesterday evening I was told they can refund PayPal users, but that they're short on Bitcoins. Today I'm being told no refund is possible and that I have to open a dispute with PayPal, as "their money is unavailable".

FarmerOak

full member

Activity: 231

Merit: 100

Just a fair warning guys: I ran one of my miners at 1500Mhz for a few minutes and it blew two modules (of the 16). I'm hashing at 14/16 the rate, and two modules remain cold. No physical damage, they just don't fire up. If anyone knows how to diagnose or fix them, I'd love to hear it.

I'm sure I was dumb to try it, but I do find it strange that it blew out 2 modules.

grumpy619

sr. member

Activity: 546

Merit: 255

Thanks. I'm kind of antsy now long does DHL take. The crazy part is once I get it running and its hashing away it won't make me feel any better I would just know I'm mining for bitcoin.

MaZo360

newbie

Activity: 14

Merit: 0

Quote from: sailem09 on January 17, 2014, 01:18:45 AM

Jenny is awesome ! 1-8-14 orders will ship out today there time apparently tracking will be available in 24 hours.

now is 2014-01-17 13:53,you will receive a ship number at about 2014-01-18 14:00

I have asked about the status of my 8/1 order yesterday, and was told it might still be in HK for some days. Email contact when very smooth until I asked for a refund (PayPal). Yet to hear back.

I'd be fine if I can be sure I get the miner within a few days, but I'm a bit fed up with the false promises / lack of communication.

madao

full member

Activity: 126

Merit: 100

When I tried messaging btmine.cs, message status just says pending...
What am I doing wrong?

sailem09

newbie

Activity: 27

Merit: 0

Jenny is awesome ! 1-8-14 orders will ship out today there time apparently tracking will be available in 24 hours.

now is 2014-01-17 13:53,you will receive a ship number at about 2014-01-18 14:00

twib2

sr. member

Activity: 280

Merit: 250

Helperizer

Quote from: grumpy619 on January 17, 2014, 12:49:50 AM

What kind of PCU would you recommend to over clock the blades?

Overkill would be the best way to go. Really, I've got two single-rail 1000W in there now, and I'll probably try 1600 assuming this goes well (been 8+ hours so far). OTOH, I had two cheapo single-rail 750W's that didn't fare so well. And as Gamer67 said, trying to OC with the btmine PSUs would be a non-starter (at best!).

grumpy619

sr. member

Activity: 546

Merit: 255

What kind of PCU would you recommend to over clock the blades?

Topic: [GROUP BUY WORLDWIDE]BTMine v1 Miner 200GH/s BTC 2.4 - page 46. (Read 97274 times)