[GROUP BUY WORLDWIDE]BTMine v1 Miner 200GH/s BTC 2.4 - page 43.

Bhosted

full member

Activity: 328

Merit: 100

Quote from: sailem09 on January 18, 2014, 02:46:12 PM

Quote from: Bhosted on January 18, 2014, 01:41:48 PM

Quote from: sailem09 on January 18, 2014, 12:58:35 PM

I am a bit confused they said that 1-8-14 orders where in HK on thursday and they where leaving thursday night through DHL its saturday now and yet still no progress on getting tracking numbers or even answers if they have left HK yet.

I got tracking last night on my order from 1/8

3556xxxxx1 DHL

Around what time did you get your tracking number because I requested one around 9pm PST and all I got was =

Quote from: Guava on January 18, 2014, 02:36:18 PM

Stock PSU is actually multi-rail.
600W 80 plus Bronze
Draws about 930W@220V at the wall with freq@1400 with the stock PSUs.

Thank you for confirming the rail amp requirement Guava. I guess I should be good in that department once it gets here.

Fri 1/17/2014 10:45 PM

udt89

member

Activity: 98

Merit: 10

Quote from: Guava on January 18, 2014, 02:36:18 PM

Stock PSU is actually multi-rail.
http://imgur.com/a/C9ZoD#18

600W 80 plus Bronze

Draws about 930W@220V at the wall with freq@1400, stock PSUs.

Is it possible to use one PSU or just stick with two

sailem09

newbie

Activity: 27

Merit: 0

Quote from: Bhosted on January 18, 2014, 01:41:48 PM

Quote from: sailem09 on January 18, 2014, 12:58:35 PM

I am a bit confused they said that 1-8-14 orders where in HK on thursday and they where leaving thursday night through DHL its saturday now and yet still no progress on getting tracking numbers or even answers if they have left HK yet.

I got tracking last night on my order from 1/8

3556xxxxx1 DHL

Around what time did you get your tracking number because I requested one around 9pm PST and all I got was =

Quote from: Guava on January 18, 2014, 02:36:18 PM

Stock PSU is actually multi-rail.
600W 80 plus Bronze
Draws about 930W@220V at the wall with freq@1400 with the stock PSUs.

Thank you for confirming the rail amp requirement Guava. I guess I should be good in that department once it gets here.

r1senfa17h

full member

Activity: 226

Merit: 100

Quote from: Guava on January 18, 2014, 02:36:18 PM

Stock PSU is actually multi-rail.
http://imgur.com/a/C9ZoD#18

600W 80 plus Bronze

Draws about 930W@220V at the wall with freq@1400, stock PSUs.

Thanks! I was looking for exactly this.

Guava

member

Activity: 70

Merit: 10

Stock PSU is actually multi-rail.
http://imgur.com/a/C9ZoD#18

600W 80 plus Bronze

Draws about 930W@220V at the wall with freq@1400, stock PSUs.

r1senfa17h

full member

Activity: 226

Merit: 100

Quote from: pinwc4 on January 18, 2014, 11:02:57 AM

So is anyone else who ordered on the 7th's tracking number still showing a status of only Shipping Information Received? I got my tracking number Thursday but there has been no movement all. I see other people posting that their package is showing movement so maybe I am just that unlucky or is it possible DHL is not updating the tracking information for my package?

Mine just shows "shipment information received". You're not alone.

sailem09

newbie

Activity: 27

Merit: 0

Quote from: Pistachio on January 18, 2014, 01:36:21 PM

Quick warning to anyone switching out the PSUs. You must have at least 60a on a single rail for this to work. I have now blown four PSUs trying to get this thing working. It just swallowed up two 750w 53a PSUs.

Pistachio thank you for the info I have a quick question. Is it 60 amps per 12volt connection or 60 amps as a whole. The reason I am asking is because I purchased two 1350 Watt Enermax Platimax power supply's for the avalon but the 12 volt rails are individually split to 30 amps each. Will this be a problem.

Slander

full member

Activity: 171

Merit: 100

Quote from: Pistachio on January 18, 2014, 01:36:21 PM

Quick warning to anyone switching out the PSUs. You must have at least 60a on a single rail for this to work. I have now blown four PSUs trying to get this thing working. It just swallowed up two 750w 53a PSUs.

Thanks for the info. Is there an easy way to determine this by looking at the specs for the psu?

BeerPimp

member

Activity: 94

Merit: 10

Quote from: Pistachio on January 18, 2014, 01:36:21 PM

Quick warning to anyone switching out the PSUs. You must have at least 60a on a single rail for this to work. I have now blown four PSUs trying to get this thing working. It just swallowed up two 750w 53a PSUs.

I bought two Corsair AX860's after I purchased them I though it was a bit overkill and was thinking of finding cheaper ones. I wanted ax870 but amazon did not have them in stock for prime.

Bhosted

full member

Activity: 328

Merit: 100

Quote from: sailem09 on January 18, 2014, 12:58:35 PM

I am a bit confused they said that 1-8-14 orders where in HK on thursday and they where leaving thursday night through DHL its saturday now and yet still no progress on getting tracking numbers or even answers if they have left HK yet.

I got tracking last night on my order from 1/8

3556xxxxx1 DHL

Pistachio

legendary

Activity: 1470

Merit: 1000

Quick warning to anyone switching out the PSUs. You must have at least 60a on a single rail for this to work. I have now blown four PSUs trying to get this thing working. It just swallowed up two 750w 53a PSUs.

bobsag3

hero member

Activity: 546

Merit: 500

Owner, Minersource.net

Quote from: BeerPimp on January 18, 2014, 12:52:48 PM

Quote from: bobsag3 on January 18, 2014, 12:28:55 PM

I do not have tracking for my 2 orders yet as well.

Bob what date do they have you listed?

1/9

sailem09

newbie

Activity: 27

Merit: 0

I am a bit confused they said that 1-8-14 orders where in HK on thursday and they where leaving thursday night through DHL its saturday now and yet still no progress on getting tracking numbers or even answers if they have left HK yet.

MaZo360

newbie

Activity: 14

Merit: 0

Quote from: greenbtc on January 18, 2014, 10:58:02 AM

Anyone had any luck getting a refund or ahold of these guys? This is ridiculous, totally should've pulled a maviator when I had the chance.

Within 24 hours after opening the PayPal claim it was set to resolved, and I will get my money refunded within 7 days.

BeerPimp

member

Activity: 94

Merit: 10

Quote from: bobsag3 on January 18, 2014, 12:28:55 PM

I do not have tracking for my 2 orders yet as well.

Bob what date do they have you listed?

bobsag3

hero member

Activity: 546

Merit: 500

Owner, Minersource.net

I do not have tracking for my 2 orders yet as well.

pinwc4

member

Activity: 100

Merit: 10

Quote from: cxboyminer on January 18, 2014, 11:33:37 AM

Quote from: pinwc4 on January 18, 2014, 11:02:57 AM

So is anyone else who ordered on the 7th's tracking number still showing a status of only Shipping Information Received? I got my tracking number Thursday but there has been no movement all. I see other people posting that their package is showing movement so maybe I am just that unlucky or is it possible DHL is not updating the tracking information for my package?

Maybe yours is stuck in the customs?

Hopefully not, it is shipping to the US and I did not ask for any unique declarations to evade taxes, fees etc. so it should clear customs quickly.

macher

newbie

Activity: 45

Merit: 0

Quote from: Professoruss on January 17, 2014, 11:51:13 PM

Meanwhile, my 1/8 still doesn't have tracking.

me too. i am angry now.

btmine only do promises, but no real result.

mchu168

full member

Activity: 188

Merit: 100

Quote from: mchu168 on January 18, 2014, 10:25:44 AM

Quote from: BeerPimp on January 18, 2014, 10:15:58 AM

Quote from: mchu168 on January 18, 2014, 10:09:06 AM

HELP!!!

I think I may have blown something in my miner. I was moving my miners around to different outlets, and after that I powered up one of my BTMine Avalons and now my hashrate is ~130Gh/s instead of the 200Gh/s I was getting before. I tried all the obvious things such as moving the miner back to the original outlet, swapping both power supplies around including trying a new PSU, etc. Nothing seems to help.

I also did a visual inspection to see if anything was obviously damaged/loose/etc and nothing seems unusual. Unfortunately I'm not an electrical guy so I can't whip out a meter and start probing the boards, although I do have a multimeter if someone could tell me what to check.

Any ideas?

Are both power supplies powering up?

Yep - they are both running. I've swapped them between both sides and tried to substitute each with another higher rated PSU (I only have one spare so I had to alternate). Nothing seems to matter. Still get 130Gh/s. I also put a killowatt meter on it, and the miner is only sucking ~700 watts or so, instead of 950-1000 watts before. It seems like either something is limiting the power to the Avalon chips or ~30% of the Avalon chips are not hashing and therefore the miner is drawing less power. I don't really know how to isolate the problem.

I just took the whole damn thing apart and isolated the problem to one of the Avalon boards. It's only hashing at ~30Gh/s, while the other board is still doing a solid 100-120Gh/s.

I guess I'm going to try to contact BTMine to get a replacement. We'll see how that goes....

cxboyminer

hero member

Activity: 896

Merit: 500

Quote from: pinwc4 on January 18, 2014, 11:02:57 AM

So is anyone else who ordered on the 7th's tracking number still showing a status of only Shipping Information Received? I got my tracking number Thursday but there has been no movement all. I see other people posting that their package is showing movement so maybe I am just that unlucky or is it possible DHL is not updating the tracking information for my package?

Maybe yours is stuck in the customs?

Topic: [GROUP BUY WORLDWIDE]BTMine v1 Miner 200GH/s BTC 2.4 - page 43. (Read 97274 times)