Topic: GTX 1050ti Ethereum Mining Rig - page 3. (Read 52768 times)

Can a standard 1000W Power supply with 6 Sata Connectors, supply to 6 1050 Ti's.
Considering that my MSI Geforce GTX 1050 Ti do not have 6 pin Connector.
Will it be able to take all the power from the PCIE 1x to 16x Extender.
Any help would be appreciated...  

Nice sharing, and especially the quoted sentence. I never tried upgraded windows 10 before, but I heard a lot of people are having problem with it.

A new installed windows 10 should generate better hashrate than windows 8.1, not much but maybe you can try out.

I have a rig for 1060 x4.
All the cards on the hynix memory, I was very sorry that I did not collect the rig on 6 cards 1050ti

Good info thx. I love 1050ti.

What about Nicehash? Have you tried to hew through it? I'm on it at the moment and it turns out more profitable than to mine on the pool.

I have the same question.

QUESTION??   Where are you located that you can get power that cheap?

Thanks in advance....

Can you tell me how to set +850 value on ubuntu 16.06 ?

I don't know if it's because of the manufacturer but I have one Gigabyte GTX 1050ti overclocked to Core +180 and Memory +850 (Samsung) and I'm getting arround 14.9 MH/s in NiceHash (DaggerPascal algorithm).

How hard is it to get electronics from Hungary to Serbia? I'm in Budapest, but I love the electricity prices there.

I am having a 12 card rigx2 of inno3d NVidia gtx 1050 ti currently mining etc and sia is very stable at present but per card mhs is 12.5 max(which is btw always) can I increase the mhs per card?

Can you tell me more about the powered risers you used?
I am confused as to what I would need. PCIe 2 female on the mobo to the PCIe 3 male on the GPU

Brothers help me out,
here in my country almost all gpus are sold out or available at 4x price,
so ended up with a decison that i will use 1050ti or rx560

i am going to buy below items please guide me if this will work or not (dont worry about power consumption and gpu prices)

12 x  1050ti or rx560 suggest me which is great after full overclocking and for reselling after a year or two.
asrock H110 pro btc or biostar TB250-BTC-PRO will buy any according to availability.
2 x 650watt psu.
12 x riser .
intel g4400.
8gb ram and 120gb ssd.

please guide me is this build will work or not will it freeze in windows 10? can i use it in ethos?
thanks in advance waiting for reply.......
 

Hi,

I must be the dumbest person on the planet, but I have to ask something here as I'm super frustrated after 2 weeks of constant troubleshooting without getting any results...
I've gotten me some cards as well, and set up a rig of my own. I've been fiddling around for days on end to even just get any system to boot (rediculous, I know...) and show me my damn card! Today I finally managed to see one of my cards appear, yeeeey, so I fumbled around some with the rest of the settings I hadn't set up yet and I've run several tests on whether or not my card actually did any good mining. It's hashing away at 15.6/15.7 Mh/s, so I'm pleased, hashing goal has been reached!

Now for the main problem, and this here I really don't understand! When I remove my card from the MB and attach a riser to it, it vanishes from existence. Whenever I add 2 cards on risers, I don't even get any screen. It just stays black whether I plug it into the MB or the GC.
A bad riser, perhaps, but I don't buy not getting any results on any card I use a riser on, so what's the deal?
It's MSI GTX 1050 ti's with Samsung memory, on a AsRock H81 Pro BTC motherboard, using a 650W Platinum PSU (which is severe overkill on just 2 cards, so it's not a lack of general power). It's specifically designed to be used in this manner, I don't understand what it is I'm doing wrong...

I do have to say that I have the risers powered with a molex pinned cable that's usually used to power HDD's. Could that be it? Does it have to be an 8-pin to molex cable in order to work?
I was already shocked to actually see these cards have no power connectors, so I could throw away the extra extension cables I ordered. But how to then power these cards when they're not in the MB? This cable is the only option I have...

No need to worry about, there will be no time to that happen.

As to the price, it'll depend in which country you live, where I live 2 x 1050Ti is not equal one 1060 GTX.

Yeah, but not with graphics hardware. That's what I meant

ETC will still be mineable after PoS.

Which miner software are you using to mine ZEC?

And there is always Zcash, with the right overclock settings , my Gigabyte GTX 1050 ti reaches easily +1000 memory and +65 core, while lowering temperature limit to 72 degrees and does about 189 Sol/s per second.

So with the milosx data he should be able to pull 6.xx dollars in a day as the picture below shows for the actual moment with the settings I suggested.