Some BIOS settings, Above 4G decoding set to enabled, Top of low drain to 3.5GB.
This fixed me and allowed me to run my PC with 6 cards
Topic: GTX 1050ti Ethereum Mining Rig - page 5. (Read 52768 times)
I do not understand what you mean
Thanks for the reply. I mean what caused your other card to break down? I am planning to do the same set up as yours and was curious of possible issues that may arise.
I do not understand what you mean
bro what is the cause?
Finally was able to make all 6 cards work! I have updated the Hash Rates I'm getting right now. Jesus finally that was a real pain to set up
Heres my rig. I have built this s#itty case, my uncle is a carpenter so he will make a better one very soon, it's just temporary.
I couldn't get the 6th GPU to run. 5 work fine, but plugging the 6th in the system and powering the rig on, only the fans spin, my keyboard / mouse don't light up, and monitor stays in sleep mode.
Then I am forced to unplug all GPUs, along with the CMOS battery, then plug back only CMOS after 2-3 minutes and power the RIG, configure the BIOS, turn off the PC, plug 5 of my GPUs back in and it's working.
I have contacted ASRock to see if this can be resolved.
Anyone here however has any idea what's causing this?
The PSU is an overkill. I doubt these GPUs can drain more than 600w under full load along with all the other components. But yeah you can always sell em later and invest the money you mined into 1070. 1070 is a monster for ZCash mining. ETH too, I've seen 32MH/s on a card on youtube, then your 1000w PSU wont be an overkill. All in all, I couldn't get the 6th GPU to load. At first my PC wouldn't start and I had to do various configuration in BIOS, disable and modify lots of options... If you can help me get the 6th GPU running you can. However I will be looking on a fix online for today, I was very busy yesterday getting the rig to run and got tierd. So my job for today is to get the 6th GPU to run, and see whats the max OC i can get with them.
The items just got shipped today, will let you know when I assemble and configure the rig.
Nice, please take a picture of the rig and post here to the btctalk community.
Equihash is the best algorithm to load at those 1050tis, it's the current best mining option for nvidia cards.
The PSU is an overkill. I doubt these GPUs can drain more than 600w under full load along with all the other components. But yeah you can always sell em later and invest the money you mined into 1070. 1070 is a monster for ZCash mining. ETH too, I've seen 32MH/s on a card on youtube, then your 1000w PSU wont be an overkill. All in all, I couldn't get the 6th GPU to load. At first my PC wouldn't start and I had to do various configuration in BIOS, disable and modify lots of options... If you can help me get the 6th GPU running you can. However I will be looking on a fix online for today, I was very busy yesterday getting the rig to run and got tierd. So my job for today is to get the 6th GPU to run, and see whats the max OC i can get with them.
The items just got shipped today, will let you know when I assemble and configure the rig.
Nice, I started a rig based on your:
- MSI Pro Solution Intel Z170A LGA 1151 DDR4 USB 3.1 ATX Motherboard
- Intel G4400 3.3 GHz LGA1151
- Kingston HyperX FURY Black 4GB 2133MHz DDR4 Non-ECC
- Corsair RM1000x, 80Gold
- ASUS Geforce GTX 1050Ti 4GB ROG STRIX OC Edition [x3]
Cost: 956$
Planning to order 3+ when the first got shipped. I'll update and share the performance too.
- MSI Pro Solution Intel Z170A LGA 1151 DDR4 USB 3.1 ATX Motherboard
- Intel G4400 3.3 GHz LGA1151
- Kingston HyperX FURY Black 4GB 2133MHz DDR4 Non-ECC
- Corsair RM1000x, 80Gold
- ASUS Geforce GTX 1050Ti 4GB ROG STRIX OC Edition [x3]
Cost: 956$
Planning to order 3+ when the first got shipped. I'll update and share the performance too.
The PSU is an overkill. I doubt these GPUs can drain more than 600w under full load along with all the other components. But yeah you can always sell em later and invest the money you mined into 1070. 1070 is a monster for ZCash mining. ETH too, I've seen 32MH/s on a card on youtube, then your 1000w PSU wont be an overkill. All in all, I couldn't get the 6th GPU to load. At first my PC wouldn't start and I had to do various configuration in BIOS, disable and modify lots of options... If you can help me get the 6th GPU running you can. However I will be looking on a fix online for today, I was very busy yesterday getting the rig to run and got tierd. So my job for today is to get the 6th GPU to run, and see whats the max OC i can get with them.
Hii
I have 2*gtx 1060 3gb GPUs and planning to add 5 more gtx 1050ti 4gb. I'm using Windows 10 anniversary update for gtx 1060 GPUs. So will it be possible to mine that gtx 1050 ti using Windows 10 anniversary?
I have 2*gtx 1060 3gb GPUs and planning to add 5 more gtx 1050ti 4gb. I'm using Windows 10 anniversary update for gtx 1060 GPUs. So will it be possible to mine that gtx 1050 ti using Windows 10 anniversary?
I think you can add whatever card you want. You MIGHT have troubles getting them to load, but It's possible. You can even mix AMD and NVIDIA cards, I've seen it on youtube, so mixing only NVIDIA cards should be quite easy to accomplish. But yes, you can do that.
Hii
I have 2*gtx 1060 3gb GPUs and planning to add 5 more gtx 1050ti 4gb. I'm using Windows 10 anniversary update for gtx 1060 GPUs. So will it be possible to mine that gtx 1050 ti using Windows 10 anniversary?
I have 2*gtx 1060 3gb GPUs and planning to add 5 more gtx 1050ti 4gb. I'm using Windows 10 anniversary update for gtx 1060 GPUs. So will it be possible to mine that gtx 1050 ti using Windows 10 anniversary?
Nice, I started a rig based on your:
- MSI Pro Solution Intel Z170A LGA 1151 DDR4 USB 3.1 ATX Motherboard
- Intel G4400 3.3 GHz LGA1151
- Kingston HyperX FURY Black 4GB 2133MHz DDR4 Non-ECC
- Corsair RM1000x, 80Gold
- ASUS Geforce GTX 1050Ti 4GB ROG STRIX OC Edition [x3]
Cost: 956$
Planning to order 3+ when the first got shipped. I'll update and share the performance too.
- MSI Pro Solution Intel Z170A LGA 1151 DDR4 USB 3.1 ATX Motherboard
- Intel G4400 3.3 GHz LGA1151
- Kingston HyperX FURY Black 4GB 2133MHz DDR4 Non-ECC
- Corsair RM1000x, 80Gold
- ASUS Geforce GTX 1050Ti 4GB ROG STRIX OC Edition [x3]
Cost: 956$
Planning to order 3+ when the first got shipped. I'll update and share the performance too.
So you get about 165 sol with max overclock on ZCash?
And what is your profit on ETH + Sia?
And what is your profit on ETH + Sia?
I have JUST NOW received 4 more cards, waiting for risers.
I will update you on my monthly profits as soon as I set everything up and running smoothly
I have 3 cards in my system now (I cant fit anymore without risers)
Currently getting 41 MH/s on ETH and 410 MH/s on Sia.
So you get about 165 sol with max overclock on ZCash?
And what is your profit on ETH + Sia?
And what is your profit on ETH + Sia?
Should i mine on claymore? I am currently mining on genoil.
I won't dual mine and if i do dual mine, how much + am i looking to earn + if i had the same mh/s/gpu power as you do?
Greetings.
I won't dual mine and if i do dual mine, how much + am i looking to earn + if i had the same mh/s/gpu power as you do?
Greetings.
Welp, I sacrificed 1 MH/s on ETH, which is -5$ / month, and got +20$ a month with Siacoin. So it's very worth it.
Should i mine on claymore? I am currently mining on genoil.
I won't dual mine and if i do dual mine, how much + am i looking to earn + if i had the same mh/s/gpu power as you do?
Greetings.
I won't dual mine and if i do dual mine, how much + am i looking to earn + if i had the same mh/s/gpu power as you do?
Greetings.
How much W does it pull at the wall? and what's the equihash performance (for example Zcash)?
I got around 165 Sol/s on Zcash. I haven't played around Zcash to see the maximum I can get out of them because I don't intent to mine it (I plan to switch on ETC when ETH goes to PoS).
GPUz displays ~92% TDP. So if the cards TDP is 75w, with my clock settings it's drawing ~70w (IF my calculations are right)
How much W does it pull at the wall? and what's the equihash performance (for example Zcash)?
I want to set up a rig for eth/etc and i found 6 gtx 1050ti cards at a reasonable price here in europe (140€ each) , here are the specs:
- VGA 4GB MSI GTX1050 TI 4GT OC
- Base Core Clock 1341 MHz
- Boost 1455 MHz
- Memory Clock Speed 7008 MHz
- Power consumption 75w
How many MH/s do you think i can reach with this card? Do you think it's worth it? What software would you recommend?
- VGA 4GB MSI GTX1050 TI 4GT OC
- Base Core Clock 1341 MHz
- Boost 1455 MHz
- Memory Clock Speed 7008 MHz
- Power consumption 75w
How many MH/s do you think i can reach with this card? Do you think it's worth it? What software would you recommend?
Read my first post I have done some research and I've updated it. I'm getting ~14.8 MH/s with my GTX 1050ti.
Nope, I was too lazy to set up a wallet. I'll try to uninstall drivers for my GPU today again, and put the GPUs in PCI-e 1x slots, one in the first, and second in the last, to set them more apart to see if I can get a better cooling, and install the driver again (Reseating the GPUs without reinstalling the driver seems to cause problems) . I have tried mining ZCash, Getting around 165 Sols with EWFB's miner (I think that's the miner name).Nevertheless I'll as soon as I reseat my cards, I'll play around ZCash to see whats the maximum sols/s I can get.
I'll also try dual-mining and post results on my first post. (I will update it every time I improve something)
I want to set up a rig for eth/etc and i found 6 gtx 1050ti cards at a reasonable price here in europe (140€ each) , here are the specs:
- VGA 4GB MSI GTX1050 TI 4GT OC
- Base Core Clock 1341 MHz
- Boost 1455 MHz
- Memory Clock Speed 7008 MHz
- Power consumption 75w
How many MH/s do you think i can reach with this card? Do you think it's worth it? What software would you recommend?
- VGA 4GB MSI GTX1050 TI 4GT OC
- Base Core Clock 1341 MHz
- Boost 1455 MHz
- Memory Clock Speed 7008 MHz
- Power consumption 75w
How many MH/s do you think i can reach with this card? Do you think it's worth it? What software would you recommend?
Read my first post I have done some research and I've updated it. I'm getting ~14.8 MH/s with my GTX 1050ti.
I want to set up a rig for eth/etc and i found 6 gtx 1050ti cards at a reasonable price here in europe (140€ each) , here are the specs:
- VGA 4GB MSI GTX1050 TI 4GT OC
- Base Core Clock 1341 MHz
- Boost 1455 MHz
- Memory Clock Speed 7008 MHz
- Power consumption 75w
How many MH/s do you think i can reach with this card? Do you think it's worth it? What software would you recommend?
- VGA 4GB MSI GTX1050 TI 4GT OC
- Base Core Clock 1341 MHz
- Boost 1455 MHz
- Memory Clock Speed 7008 MHz
- Power consumption 75w
How many MH/s do you think i can reach with this card? Do you think it's worth it? What software would you recommend?
Read my first post I have done some research and I've updated it. I'm getting ~14.8 MH/s with my GTX 1050ti.
Jump to: