GTX 1060 discussion thread - page 27.

Sn1p3r

newbie

Activity: 48

Merit: 0

Quote from: RealSwissMiner on December 16, 2017, 12:29:24 PM

Quote from: Sn1p3r on December 16, 2017, 12:11:08 PM

http://ss.kikimon.net/39Rmvw.png

http://ss.kikimon.net/mh9kqPA.png

http://ss.kikimon.net/4xPMe5h.png

How am I doing?

I assume you are mining ETH? No need to run the cards with 100% PL.
Decrease it to 80% and you will see that it has basically no impact on the hashrate. They will consume less and run cooler. You can thank me later.
From 80% PL onwards decrease in 5% steps and observe the hashrate. You will be able to figure out the best performance/consumption setting - usually somehwere below 70% PL with the core clocked around 1500 Mhz.

For sure I'm gonna give it a try then!
I would do it when I get on location, if I make something wrong so I'm there to restart it Tongue

Thanks!

RealSwissMiner

member

Activity: 336

Merit: 15

Quote from: Sn1p3r on December 16, 2017, 12:11:08 PM

How am I doing?

I assume you are mining ETH? No need to run the cards with 100% PL.
Decrease it to 80% and you will see that it has basically no impact on the hashrate. They will consume less and run cooler. You can thank me later.
From 80% PL onwards decrease in 5% steps and observe the hashrate. You will be able to figure out the best performance/consumption setting - usually somehwere below 70% PL with the core clocked around 1500 Mhz.

Sn1p3r

newbie

Activity: 48

Merit: 0

http://ss.kikimon.net/39Rmvw.png

http://ss.kikimon.net/mh9kqPA.png

http://ss.kikimon.net/4xPMe5h.png

How am I doing?

timbereagle

hero member

Activity: 881

Merit: 502

I got 23.3 MHS on ETHhash and 310 sols on Zcash.
If I give more power zcash can be up to 325 sols but no need to make cards run hot.

meligo

newbie

Activity: 10

Merit: 1

Since I'm working with the Community build of this Ubuntu mining OS , I no longer need to worry about the correct OC settings.. It has it owns auto clock.. https://nvoc-mining-os.com/downloads/community-builds/ , it seeks it's own sweet spot and stays on it..

AlteregoX

full member

Activity: 246

Merit: 100

I stopped dual mining ETH + SIA today

Would you recommend me to mine ETH +DCR , ETH + LBRY or ETH + PASC?

RealSwissMiner

member

Activity: 336

Merit: 15

Quote from: Lenorag on December 14, 2017, 03:38:14 AM

300 sol on equihash Palit Jetstream 1060 3 GB
no powerlimit, core +125

Seems legit, i got the same on a Gigabyte. I normally dont run the cards at full power to increase the efficiency and reduce the power costs as electricity is not that cheap around here.

Deimos030

member

Activity: 71

Merit: 12

500-580 h/S XMR

Lenorag

member

Activity: 104

Merit: 12

300 sol on equihash Palit Jetstream 1060 3 GB
no powerlimit, core +125

rockie

newbie

Activity: 4

Merit: 0

https://imgur.com/a/5CJeZ

Mining lux on ccminer 2.2.3 with 6 card colorful GTX 1060. Hashrate about 69MH/s
Core : +175
Mem : +440

preda

sr. member

Activity: 756

Merit: 250

Quote from: RealSwissMiner on December 14, 2017, 01:40:59 AM

Quote from: preda on December 13, 2017, 07:36:06 PM

Quote from: Jobez on December 13, 2017, 06:53:42 PM

ETH+DCR

Gigabyte WF 1060 3gb 23mhs/304mhs
Asus dual 1060 6gb 23.5mhs/310mhs

Both with samsung memory

Core:+125
Mem:+900

-dcri 40

the tdp?

i have your same cards samsung memory and after i am mining after about 20 min one card goes in block and disappear
if i mine just eth its all ok just i have hasrate drop sometimes.

Did you guys made the calculation what you gain from dual mining? (also considering the higher fee on ETH in claymore)
What I read here is that people face stability issues, cards run much hotter and problems of that kind. Also you stress the cards more which reduces their lifetime.

yes i know but decred is very profitable and it is growing day by day so it is good to mine..
but you are right it stress too much the nvidia cards amd is more easy with this dual and the fees arent a problem

RealSwissMiner

member

Activity: 336

Merit: 15

Quote from: preda on December 13, 2017, 07:36:06 PM

Quote from: Jobez on December 13, 2017, 06:53:42 PM

ETH+DCR

Gigabyte WF 1060 3gb 23mhs/304mhs
Asus dual 1060 6gb 23.5mhs/310mhs

Both with samsung memory

Core:+125
Mem:+900

-dcri 40

the tdp?

i have your same cards samsung memory and after i am mining after about 20 min one card goes in block and disappear
if i mine just eth its all ok just i have hasrate drop sometimes.

Did you guys made the calculation what you gain from dual mining? (also considering the higher fee on ETH in claymore)
What I read here is that people face stability issues, cards run much hotter and problems of that kind. Also you stress the cards more which reduces their lifetime.

preda

sr. member

Activity: 756

Merit: 250

Quote from: Jobez on December 13, 2017, 06:53:42 PM

ETH+DCR

Gigabyte WF 1060 3gb 23mhs/304mhs
Asus dual 1060 6gb 23.5mhs/310mhs

Both with samsung memory

Core:+125
Mem:+900

-dcri 40

the tdp?

i have your same cards samsung memory and after i am mining after about 20 min one card goes in block and disappear
if i mine just eth its all ok just i have hasrate drop sometimes.

Jobez

newbie

Activity: 3

Merit: 0

ETH+DCR

Gigabyte WF 1060 3gb 23mhs/304mhs
Asus dual 1060 6gb 23.5mhs/310mhs

Both with samsung memory

Core:+125
Mem:+900

-dcri 40

Victorio

full member

Activity: 281

Merit: 100

Quote from: farkest on December 13, 2017, 04:36:54 PM

But what I dont understand is that the actually same card when minning alone can overclock more then when is mining with other.

Long story short: GPU and CPU crystals are carved out of round silicon wafers. It is considered that crystals cut from the center are better in performance and stability than those from the outer edge.
A lower grade crystal will take higher voltage to achieve the same frequency and will generate more errors outside of its standard frequency.
https://www.reddit.com/r/overclocking/comments/7iw1w3/what_causes_the_silicon_lottery/
http://www.techradar.com/news/computing-components/graphics-cards/how-gpus-are-made-1000923/2

farkest

newbie

Activity: 40

Merit: 0

Crazy world of hardwares/software Cheesy

But what I dont understand is that the actually same card when minning alone can overclock more then when is mining with other.

klintistwood

full member

Activity: 157

Merit: 100

Out of the box is where I live

Quote from: Victorio on December 13, 2017, 01:18:31 PM

Quote from: farkest on December 13, 2017, 01:03:56 PM

With my first I could run +900 memory clock, but now with 2 GPU im running them with +600~700 memory clock, both with Samsung memory.

Silicon lottery. The overclocking potential is individual for every piece of GPU.
You might have bought 2 identical GPUs - same model, same memory, same production batch, yet one will handle +900 and the second +600.

Got the same, all Samsung memory, exactly the same card model and all bought in the same batch but not a single one has the same performance.

RealSwissMiner

member

Activity: 336

Merit: 15

Quote from: Victorio on December 13, 2017, 01:18:31 PM

Quote from: farkest on December 13, 2017, 01:03:56 PM

With my first I could run +900 memory clock, but now with 2 GPU im running them with +600~700 memory clock, both with Samsung memory.

Silicon lottery. The overclocking potential is individual for every piece of GPU.
You might have bought 2 identical GPUs - same model, same memory, same production batch, yet one will handle +900 and the second +600.

Also putting +200 on the GPU clock and lowering the PL too much will not have an effect as the card doesn’t receive enough power. Worst case it will even create stability issues.

Victorio

full member

Activity: 281

Merit: 100

Quote from: farkest on December 13, 2017, 01:03:56 PM

With my first I could run +900 memory clock, but now with 2 GPU im running them with +600~700 memory clock, both with Samsung memory.

Silicon lottery. The overclocking potential is individual for every piece of GPU.
You might have bought 2 identical GPUs - same model, same memory, same production batch, yet one will handle +900 and the second +600.

farkest

newbie

Activity: 40

Merit: 0

Hi guys,

I just received my second 1060 and it feels like with just one GPU it was more easy to overclock the memory without crash. Is it normal with more than one GPU?
With my first I could run +900 memory clock, but now with 2 GPU im running them with +600~700 memory clock, both with Samsung memory.

Topic: GTX 1060 discussion thread - page 27. (Read 289435 times)