GTX 1060 discussion thread - page 3.

crypto.lawyer.187

full member

Activity: 210

Merit: 100

Quote from: whotheff on June 30, 2018, 02:43:59 AM

Quote from: KriptoGuruTR on June 29, 2018, 02:37:42 PM

1060 6GB, Samsung. Ubuntu 18.04 LTS 390 Nvidia. Dstm miner. +135 core +100 mem.

301 Sol/s at 80 watts. That is very respectable performance. I no longer buy 1050 ti. 1060 is my new bottom-end GPU.

1060 is a great GPU for mining unless you want ethash performance.

The strenght of 1060 is not the hashrate, it's the low power consumption per mh/s.

Any 1060 can keep up with +150 core and +500 mem

What are people mining with 1060 3GB ??

I have over 100 GPUS in my basement

50 1060 3gb

27 gtx 1070

18 rx 580

12 gtx 1060 6gb

am i right that ETHASH is still the best to mine? i cant mine ether because of dag

whotheff

member

Activity: 762

Merit: 35

Quote from: Dragstar on July 16, 2018, 03:46:56 AM

I see people suggesting lyra2z but every calculator I used saying eth is best

If you benchmark your card's power usage and productivity on different algos,
you can insert more accurate numbers in the calculators. But in general they are correct.
And remember that profit which calcs show is based on current crypto price.
And your actual profit is based on the price at which you sell.

Dragstar

newbie

Activity: 77

Merit: 0

I see people suggesting lyra2z but every calculator I used saying eth is best

RealSwissMiner

member

Activity: 336

Merit: 15

Quote from: Dragstar on July 15, 2018, 05:09:01 AM

What’s the best algo for 1060 cards now?still eth?

Just read a couple of the posts above yours it will give you some hints. But for sure you cant make a fortune with it

Dragstar

newbie

Activity: 77

Merit: 0

What’s the best algo for 1060 cards now?still eth?

preda

sr. member

Activity: 756

Merit: 250

Quote from: miningchamp93 on July 14, 2018, 07:41:53 AM

Description
The Gigabyte GeForce GTX 1060 3 GB provides hashrate of 23.6 MHash/s for Lyra2REv2 at Coreclock 1850 MHz and Memoryclock 4151 MHz while consuming 95W watts.

Gpu Specs

The Nvidia GeForce GTX 1060 3 GB is a graphics card by Nvidia. It comes with GDDR5 memory and has 192 bit memory interface or bus width.

https://miningchamp.com/gpus/197/Gigabyte-GeForce-GTX-1060-3-GB-hashrate

mine do 28mh lyra2v2 with cryptodredge

Sikkan666

member

Activity: 240

Merit: 11

I am more than happy with my 1060 3 gbs.. can still mine about any coin out there and works great on x16r, lyra2z, lyra2v2, zhash and other algos

miningchamp93

newbie

Activity: 84

Merit: 0

Description
The Gigabyte GeForce GTX 1060 3 GB provides hashrate of 23.6 MHash/s for Lyra2REv2 at Coreclock 1850 MHz and Memoryclock 4151 MHz while consuming 95W watts.

Gpu Specs

The Nvidia GeForce GTX 1060 3 GB is a graphics card by Nvidia. It comes with GDDR5 memory and has 192 bit memory interface or bus width.

https://miningchamp.com/gpus/197/Gigabyte-GeForce-GTX-1060-3-GB-hashrate

ALF01

newbie

Activity: 28

Merit: 0

Quote from: Bousarha on July 05, 2018, 07:21:56 AM

Quote from: hatshepsut93 on August 04, 2016, 02:41:01 PM

Tried to search on different topics and blogs and couldn't find the exact results.

So, what is the hashrate of GTX 1060 on different algos? Especially on Ether.

I currently run my cards on windows.
Card: Powercolour gtx 1060 6g (hynix)
Miner: ethminer 0.15.0.dev4
Hashrate: 23.55 Mh/s (each)
Temperature: 58
Coin: ETC/ETH

I used some powerlimit and clock options in afterburner.

This is 99% the hash rate with the LYRA2rev2 algorithm with an gtx 1060 with hynix memory, or the card has a samsung or micron brand memory.

whotheff

member

Activity: 762

Merit: 35

Quote from: Bousarha on July 05, 2018, 07:21:56 AM

Quote from: hatshepsut93 on August 04, 2016, 02:41:01 PM

Tried to search on different topics and blogs and couldn't find the exact results.

So, what is the hashrate of GTX 1060 on different algos? Especially on Ether.

I currently run my cards on windows.
Card: Powercolour gtx 1060 6g (hynix)
Miner: ethminer 0.15.0.dev4
Hashrate: 23.55 Mh/s (each)
Temperature: 58
Coin: ETC/ETH

I used some powerlimit and clock options in afterburner.

I've never seen Hynix pass the 20.5 barrier. How did you chieve 23.55 on Hynix mem?

Bousarha

newbie

Activity: 28

Merit: 0

Quote from: hatshepsut93 on August 04, 2016, 02:41:01 PM

Tried to search on different topics and blogs and couldn't find the exact results.

So, what is the hashrate of GTX 1060 on different algos? Especially on Ether.

I currently run my cards on windows.
Card: Powercolour gtx 1060 6g (hynix)
Miner: ethminer 0.15.0.dev4
Hashrate: 23.55 Mh/s (each)
Temperature: 58
Coin: ETC/ETH

I used some powerlimit and clock options in afterburner.

Dragstar

newbie

Activity: 77

Merit: 0

Let’s see this

Thently

newbie

Activity: 3

Merit: 0

running 1060 3g on nice hash is getting me 80 cents to a dollar a day running dagger with Kec 20% so not bad for now. Also Taxes can be almost mitigated buying gold tax free. No tax implication or irs reporting unless purchase is over 10,000. You can hold as investment or sell at pot.. I use JM Bullion but not really an advertisement just what I have found easy they take bitcoin payments directly.

Thent

heavyarms1912

full member

Activity: 729

Merit: 114

Quote from: Rasanders22 on July 01, 2018, 01:17:01 PM

Quote from: RentGPU on June 30, 2018, 02:28:09 PM

What time you think the best time to let the 1060 3g go for gamers and leave the mining rigs, i have alot of that card and thinking of selling in the near future to upgrade , what do you think?

Well currently 1060 3gb are getting bids of about 120$ on ebay. At current prices, 1 10603gb wil make 58 cents a day, (22mh/s, 70 watts, 0.10$ kw/h). Thats 206 days of mining to equal what you can see on your card. Ethereum wont hit 3gb dag size until may 2019, so if nothing changes, Casper isn't implemented before then, and you stop mining with the cards now and sold them for $120, you would loose out on about 4-5 months of mining, or 60-70$. Again, this is all at current prices and difficulty and expecting Casper to not be implemented.

Now if Casper is implemented, which no one can say when, you will mostly likely see a flood of cheap GPUs on ebay, Kijijji, whatever. You will also see all the other alt-coins get flooded with hashing power. No one knows which network will become the new home for 236 TH/s of power that is currently powering Ethereum network.

Personally, I am going to stay in until the bitter end. Im willing to take the risk since most of my GPU's have paid themselves off.

you also need to consider heat and taxes if one plans to sell crypto.

Rasanders22

jr. member

Activity: 67

Merit: 3

Quote from: RentGPU on June 30, 2018, 02:28:09 PM

What time you think the best time to let the 1060 3g go for gamers and leave the mining rigs, i have alot of that card and thinking of selling in the near future to upgrade , what do you think?

Well currently 1060 3gb are getting bids of about 120$ on ebay. At current prices, 1 10603gb wil make 58 cents a day, (22mh/s, 70 watts, 0.10$ kw/h). Thats 206 days of mining to equal what you can see on your card. Ethereum wont hit 3gb dag size until may 2019, so if nothing changes, Casper isn't implemented before then, and you stop mining with the cards now and sold them for $120, you would loose out on about 4-5 months of mining, or 60-70$. Again, this is all at current prices and difficulty and expecting Casper to not be implemented.

Now if Casper is implemented, which no one can say when, you will mostly likely see a flood of cheap GPUs on ebay, Kijijji, whatever. You will also see all the other alt-coins get flooded with hashing power. No one knows which network will become the new home for 236 TH/s of power that is currently powering Ethereum network.

Personally, I am going to stay in until the bitter end. Im willing to take the risk since most of my GPU's have paid themselves off.

Thently

newbie

Activity: 3

Merit: 0

Well just bepends on how hard core you are 1060 3 gig will be out when dag is over 3 gigs not really a processing issue yet. If you are just trying to make 5 bucks a day or so a rig on 1060 3gb 6 of them are right about in that range give or take. I’m not sure what most people consider worth it to mine really. 1800 bucks is big money to some and chump change to others. Well good luck all happy mining..

Thent

swogerino

legendary

Activity: 3318

Merit: 1247

Bitcoin Casino Est. 2013

Quote from: RentGPU on June 30, 2018, 02:28:09 PM

What time you think the best time to let the 1060 3g go for gamers and leave the mining rigs, i have alot of that card and thinking of selling in the near future to upgrade , what do you think?

Well you should sell the faster the better. The reason is even miners will not be happy with this card and even gamers , real gamers don't care about any GPU with less than 6 GB VRAM.

The only true cards that I think will serve mining for 1 or 2 more years are only the GTX 1070 ti, 1080 and 1080 ti.

RentGPU

sr. member

Activity: 661

Merit: 258

What time you think the best time to let the 1060 3g go for gamers and leave the mining rigs, i have alot of that card and thinking of selling in the near future to upgrade , what do you think?

swogerino

legendary

Activity: 3318

Merit: 1247

Bitcoin Casino Est. 2013

Quote from: Thently on June 30, 2018, 08:22:43 AM

i Have a EVGA 1060 3gb it sits at 24mh at +150 and +800 no issues I did see 25.5 at +1000 men but that crashed after about an hour. The 800 has been up for a long time stable no issues 80% power 70% fan. Only annoying thing is claymore picked sia and it shows no value like 0 I am going to turn sia off I think.

I believe you are mining on Linux or Windows 7 if you referring to Eth with 24 mhs at +150 and +800 which based on the clock data it seems you are referring to Eth. Unfortunately it does not work on Windows 10 but it is doing well in Zec with 310-320 sol/s with dstm miner. Also behaves well in Lyra2Rev and temporarily with Cryptonight V7.

Not many other coins can be mined with this card anymore.

Thently

newbie

Activity: 3

Merit: 0

i Have a EVGA 1060 3gb it sits at 24mh at +150 and +800 no issues I did see 25.5 at +1000 men but that crashed after about an hour. The 800 has been up for a long time stable no issues 80% power 70% fan. Only annoying thing is claymore picked sia and it shows no value like 0 I am going to turn sia off I think.

Topic: GTX 1060 discussion thread - page 3. (Read 289435 times)