[Guide] Dogie's Comprehensive ASICMiner Blade Setup - page 50.

soy

legendary

Activity: 1428

Merit: 1013

Quote from: bbxx on September 08, 2013, 02:17:23 AM

Quote from: svojoe on September 07, 2013, 07:46:35 PM

Um...
proxy.exe error: argument -p/--port: invalid int value 'password'

Doh,

I might have it!

its -cu and -cp

And...

It still doesn't work. hmmm. port 3333, just never fully connects and no port, it scrolls crazy fast.

I'm getting a "transport exception" and a ERROR proxy Client_service on timeout.

Use this guide/faq

Faq:
....
4. Stratum proxy czyli bramka dla blade na swiat

- pobieramy ze strony https://github.com/slush0/stratum-minin ... /downloads
- pomocny opis tutaj http://mining.bitcoin.cz/mining-proxy-howto
- ustawiamy na wybrana kopalnie np. Polmine
- zmieniamy w panelu blade ip docelowe na ip komputera z proxy

przykladowa konfiguracja

- wrzucamy do autostartu pliczek z pulpitu ktory ma taka np. skladnie polecenia
C:\Users\uzytkownik\Downloads\mining_proxy.exe -o api.polmine.pl -p 8361

- ustawiamy blade tak np.

IP 192.168.1.201
Mask   255.255.255.0
Gateway 192.168.1.1
WEB Port 8000
Primary DNS 192.168.1.1
Secondary DNS 8.8.8.8
Ports   8332,8332
Server addresses   192.168.1.100,192.168.1.100 (.100 to nr ip komputera z proxy)
user:pass   uzytkownikeb201:x,uzytkownikeb201:x

....
https://forum.bitcoin.pl/asicminer-blade-faq-pomoc-techniczna-i-zdjecia-koparek-t9303.html

Do you need two user:pass? You might be addressing two servers of a single pool and the user pass would be the same on any server of that pool.

bbxx

hero member

Activity: 728

Merit: 500

cryptoshark

Quote from: svojoe on September 07, 2013, 07:46:35 PM

Um...
proxy.exe error: argument -p/--port: invalid int value 'password'

Doh,

I might have it!

its -cu and -cp

And...

It still doesn't work. hmmm. port 3333, just never fully connects and no port, it scrolls crazy fast.

I'm getting a "transport exception" and a ERROR proxy Client_service on timeout.

Use this guide/faq

Faq:
....
4. Stratum proxy czyli bramka dla blade na swiat

- pobieramy ze strony https://github.com/slush0/stratum-minin ... /downloads
- pomocny opis tutaj http://mining.bitcoin.cz/mining-proxy-howto
- ustawiamy na wybrana kopalnie np. Polmine
- zmieniamy w panelu blade ip docelowe na ip komputera z proxy

przykladowa konfiguracja

- wrzucamy do autostartu pliczek z pulpitu ktory ma taka np. skladnie polecenia
C:\Users\uzytkownik\Downloads\mining_proxy.exe -o api.polmine.pl -p 8361

- ustawiamy blade tak np.

IP 192.168.1.201
Mask   255.255.255.0
Gateway 192.168.1.1
WEB Port 8000
Primary DNS 192.168.1.1
Secondary DNS 8.8.8.8
Ports   8332,8332
Server addresses   192.168.1.100,192.168.1.100 (.100 to nr ip komputera z proxy)
user:pass   uzytkownikeb201:x,uzytkownikeb201:x

....
https://forum.bitcoin.pl/asicminer-blade-faq-pomoc-techniczna-i-zdjecia-koparek-t9303.html

svojoe

legendary

Activity: 968

Merit: 1000

einc.io

Quote from: dogie on September 07, 2013, 09:45:25 PM

Quote from: svojoe on September 07, 2013, 08:41:52 PM

Quote from: dogie on September 07, 2013, 08:10:27 PM

Use ctrl+s to stop it scrolling, same to resume and see what it says.

This is what I got on first break:

or this link:
https://www.dropbox.com/s/nbu22qrn70lv9oo/dos_error.jpg

Make any sense of it?

I don't know enough of the tech but looks like its accepting the blade as a client, rejecting it, trying again (hence sometimes you have two 'active' clients). Its config somewhere.

I hope if you are right, that this is a easy fix. I'm pretty bummed about this. At these hashrates I would be smart to sell these blades right now and just take the losses and reinvest in bTC itself.

dogie

legendary

Activity: 1666

Merit: 1185

dogiecoin.com

Quote from: svojoe on September 07, 2013, 08:41:52 PM

Quote from: dogie on September 07, 2013, 08:10:27 PM

Use ctrl+s to stop it scrolling, same to resume and see what it says.

This is what I got on first break:

or this link:
https://www.dropbox.com/s/nbu22qrn70lv9oo/dos_error.jpg

Make any sense of it?

I don't know enough of the tech but looks like its accepting the blade as a client, rejecting it, trying again (hence sometimes you have two 'active' clients). Its config somewhere.

svojoe

legendary

Activity: 968

Merit: 1000

einc.io

Quote from: dogie on September 07, 2013, 08:10:27 PM

Use ctrl+s to stop it scrolling, same to resume and see what it says.

This is what I got on first break:

or this link:
https://www.dropbox.com/s/nbu22qrn70lv9oo/dos_error.jpg

Make any sense of it?

dogie

legendary

Activity: 1666

Merit: 1185

dogiecoin.com

Use ctrl+s to stop it scrolling, same to resume and see what it says.

svojoe

legendary

Activity: 968

Merit: 1000

einc.io

Quote

On config page,
ports = Same as pool?
serveraddress = localhost (with or without the ports?!)
userpass = pool user and pass

this seems simple, but obviously because I am showing no hashrate, there is a pool-connection glitch or something I assume. I just averaged the performance of the last several hours, and they are only averaging 5ghash on the pool. Why would they restart every 2 minutes if it was pool problems though?

Me = confused...

I think I see something:

-o http://us2.eclipsemc.com:3333 -u Username -p pass p is password not port,correct Huh

correct
[/quote]

Um...
proxy.exe error: argument -p/--port: invalid int value 'password'

Doh,

I might have it!

its -cu and -cp

And...

It still doesn't work. hmmm. port 3333, just never fully connects and no port, it scrolls crazy fast.

I'm getting a "transport exception" and a ERROR proxy Client_service on timeout.

bcp19

hero member

Activity: 532

Merit: 500

Quote from: Unacceptable on September 07, 2013, 04:05:17 PM

Quote from: svojoe on September 06, 2013, 01:09:39 PM

Quote from: dogie on September 06, 2013, 11:02:14 AM

Quote from: svojoe on September 06, 2013, 10:45:17 AM

Now I am trying a much stronger PSU on a different blade, When set to port 3333 for Eclipse (not sure where I got it) the proxy scrolls so fast I can't make out what it is doing, but the miner does not hash and the pool shows no work. hhmmm Sad

Sounds like login/pool info is wrong.

I agree, but I just can't find squat for info on this. I've tried a hundred combinations now and nothing seems to work. There is only a few variables here so I'm not sure how I am messing it up.

-o us2.eclipsemc.com -p 3333 (or 8337, or 8332)

On config page,
ports = Same as pool?
serveraddress = localhost (with or without the ports?!)
userpass = pool user and pass

this seems simple, but obviously because I am showing no hashrate, there is a pool-connection glitch or something I assume. I just averaged the performance of the last several hours, and they are only averaging 5ghash on the pool. Why would they restart every 2 minutes if it was pool problems though?

Me = confused...

I think I see something:

-o http://us2.eclipsemc.com:3333 -u Username -p pass p is password not port,correct Huh

correct

Unacceptable

legendary

Activity: 2212

Merit: 1001

Quote from: svojoe on September 06, 2013, 01:09:39 PM

Quote from: dogie on September 06, 2013, 11:02:14 AM

Quote from: svojoe on September 06, 2013, 10:45:17 AM

Now I am trying a much stronger PSU on a different blade, When set to port 3333 for Eclipse (not sure where I got it) the proxy scrolls so fast I can't make out what it is doing, but the miner does not hash and the pool shows no work. hhmmm Sad

Sounds like login/pool info is wrong.

I agree, but I just can't find squat for info on this. I've tried a hundred combinations now and nothing seems to work. There is only a few variables here so I'm not sure how I am messing it up.

-o us2.eclipsemc.com -p 3333 (or 8337, or 8332)

On config page,
ports = Same as pool?
serveraddress = localhost (with or without the ports?!)
userpass = pool user and pass

this seems simple, but obviously because I am showing no hashrate, there is a pool-connection glitch or something I assume. I just averaged the performance of the last several hours, and they are only averaging 5ghash on the pool. Why would they restart every 2 minutes if it was pool problems though?

Me = confused...

I think I see something:

-o http://us2.eclipsemc.com:3333 -u Username -p pass p is password not port,correct Huh

aleph

newbie

Activity: 10

Merit: 0

Does anyone have a link to a compiled Windows mining_proxy.exe file? Slush's link is down. Thanks in advance.

svojoe

legendary

Activity: 968

Merit: 1000

einc.io

Quote from: brogramer on September 07, 2013, 09:13:25 AM

Hey guys, I've been absolutely pulling my hair out with my blade. I can get it to connect every now as if by effing magic but generally it hangs on the initial hit of my stratum proxy and then the blade sends an ack/reset tcp packet on every one of it's ports.... and then resets cuz it hasn't hashed in two minutes...

Has anyone else seen this issue? Is it just a faulty ethernet plug? Is there anything I can do?

- the power is right. The voltage is tuned. It's worked for at least a day before. I've gone through this whole thread but no one has really asked a question like mine... (maybe no one else wiresharked their stuff? I have the packet capture if anyone wants it..)

I've tried many different versions of the stratum proxy and on windows / osx. No dice :/.

I'm having similar problems, Mine are hashing while connected directly to the pools, but only about half the speed, and they still reset every 2 minutes. The config pages show zero hashrate, only received shares, which get up to about 300 before it restarts. I've tried the proxy on several pools and I still can't figure it out also.

brogramer

newbie

Activity: 15

Merit: 0

Hey guys, I've been absolutely pulling my hair out with my blade. I can get it to connect every now as if by effing magic but generally it hangs on the initial hit of my stratum proxy and then the blade sends an ack/reset tcp packet on every one of it's ports.... and then resets cuz it hasn't hashed in two minutes...

Has anyone else seen this issue? Is it just a faulty ethernet plug? Is there anything I can do?

- the power is right. The voltage is tuned. It's worked for at least a day before. I've gone through this whole thread but no one has really asked a question like mine... (maybe no one else wiresharked their stuff? I have the packet capture if anyone wants it..)

I've tried many different versions of the stratum proxy and on windows / osx. No dice :/.

svojoe

legendary

Activity: 968

Merit: 1000

einc.io

Quote from: west17m on September 06, 2013, 01:45:00 PM

Quote from: svojoe on September 06, 2013, 01:09:39 PM

Quote from: dogie on September 06, 2013, 11:02:14 AM

Quote from: svojoe on September 06, 2013, 10:45:17 AM

Now I am trying a much stronger PSU on a different blade, When set to port 3333 for Eclipse (not sure where I got it) the proxy scrolls so fast I can't make out what it is doing, but the miner does not hash and the pool shows no work. hhmmm Sad

Sounds like login/pool info is wrong.

I agree, but I just can't find squat for info on this. I've tried a hundred combinations now and nothing seems to work. There is only a few variables here so I'm not sure how I am messing it up.

-o us2.eclipsemc.com -p 3333 (or 8337, or 8332)

On config page,
ports = Same as pool?
serveraddress = localhost (with or without the ports?!)
userpass = pool user and pass

this seems simple, but obviously because I am showing no hashrate, there is a pool-connection glitch or something I assume. I just averaged the performance of the last several hours, and they are only averaging 5ghash on the pool. Why would they restart every 2 minutes if it was pool problems though?

Me = confused...

My blades worked fine with eclipsemc but I had to set up a stratum proxy and go through that.

What strings did you use? I've tried so many combinations I'm not sure what I'm missing at this point.

west17m

member

Activity: 61

Merit: 10

Quote from: svojoe on September 06, 2013, 01:09:39 PM

Quote from: dogie on September 06, 2013, 11:02:14 AM

Quote from: svojoe on September 06, 2013, 10:45:17 AM

Now I am trying a much stronger PSU on a different blade, When set to port 3333 for Eclipse (not sure where I got it) the proxy scrolls so fast I can't make out what it is doing, but the miner does not hash and the pool shows no work. hhmmm Sad

Sounds like login/pool info is wrong.

I agree, but I just can't find squat for info on this. I've tried a hundred combinations now and nothing seems to work. There is only a few variables here so I'm not sure how I am messing it up.

-o us2.eclipsemc.com -p 3333 (or 8337, or 8332)

On config page,
ports = Same as pool?
serveraddress = localhost (with or without the ports?!)
userpass = pool user and pass

this seems simple, but obviously because I am showing no hashrate, there is a pool-connection glitch or something I assume. I just averaged the performance of the last several hours, and they are only averaging 5ghash on the pool. Why would they restart every 2 minutes if it was pool problems though?

Me = confused...

My blades worked fine with eclipsemc but I had to set up a stratum proxy and go through that.

svojoe

legendary

Activity: 968

Merit: 1000

einc.io

Quote from: dogie on September 06, 2013, 11:02:14 AM

Quote from: svojoe on September 06, 2013, 10:45:17 AM

Now I am trying a much stronger PSU on a different blade, When set to port 3333 for Eclipse (not sure where I got it) the proxy scrolls so fast I can't make out what it is doing, but the miner does not hash and the pool shows no work. hhmmm Sad

Sounds like login/pool info is wrong.

I agree, but I just can't find squat for info on this. I've tried a hundred combinations now and nothing seems to work. There is only a few variables here so I'm not sure how I am messing it up.

-o us2.eclipsemc.com -p 3333 (or 8337, or 8332)

On config page,
ports = Same as pool?
serveraddress = localhost (with or without the ports?!)
userpass = pool user and pass

this seems simple, but obviously because I am showing no hashrate, there is a pool-connection glitch or something I assume. I just averaged the performance of the last several hours, and they are only averaging 5ghash on the pool. Why would they restart every 2 minutes if it was pool problems though?

Me = confused...

dogie

legendary

Activity: 1666

Merit: 1185

dogiecoin.com

Quote from: svojoe on September 06, 2013, 10:45:17 AM

Now I am trying a much stronger PSU on a different blade, When set to port 3333 for Eclipse (not sure where I got it) the proxy scrolls so fast I can't make out what it is doing, but the miner does not hash and the pool shows no work. hhmmm Sad

Sounds like login/pool info is wrong.

svojoe

legendary

Activity: 968

Merit: 1000

einc.io

Now I am trying a much stronger PSU on a different blade, When set to port 3333 for Eclipse (not sure where I got it) the proxy scrolls so fast I can't make out what it is doing, but the miner does not hash and the pool shows no work. hhmmm Sad

atmclikk

newbie

Activity: 30

Merit: 0

Quote from: Trongersoll on September 06, 2013, 05:07:21 AM

Quote from: svojoe on September 06, 2013, 01:18:32 AM

Quote from: atmclikk on September 06, 2013, 12:52:19 AM

Does anyone know where I can download the precompiled Windows Stratum proxy at? The link from Slush's pool has been broken for a few days....-

A cool dude passed this to me earlier: http://btc.anapaapps.com/mining_proxy.php

This link does an automatic download.

Thanks!!!

Trongersoll

hero member

Activity: 490

Merit: 501

Quote from: svojoe on September 06, 2013, 01:18:32 AM

Quote from: atmclikk on September 06, 2013, 12:52:19 AM

Does anyone know where I can download the precompiled Windows Stratum proxy at? The link from Slush's pool has been broken for a few days....-

A cool dude passed this to me earlier: http://btc.anapaapps.com/mining_proxy.php

This link does an automatic download.

svojoe

legendary

Activity: 968

Merit: 1000

einc.io

Quote from: atmclikk on September 06, 2013, 12:52:19 AM

Does anyone know where I can download the precompiled Windows Stratum proxy at? The link from Slush's pool has been broken for a few days....-

A cool dude passed this to me earlier: http://btc.anapaapps.com/mining_proxy.php

Topic: [Guide] Dogie's Comprehensive ASICMiner Blade Setup - page 50. (Read 580775 times)