Topic: [Guide] Dogie's Comprehensive ASICMiner Cube Setup [HD] - page 24. (Read 187363 times)

command line syntax
cd C:\Proxy
mining_proxy.exe -o stratum.btcguild.com -p 3333 -gp 8332

http://s30.postimg.org/ra3wlqlwx/202.jpg

http://s28.postimg.org/f5e13m2xp/204.jpg

I've since experimented with both cubes and have found that one of them (202) will mine, but the other one (204) will not mine at all and throws the errors previously posted. I'm currently mining at BTC with stratum with the working cube and am experimenting with the get work protocol on the non-functional cube. So far I haven't been able to get the second cube to mine at all. I've tried them both separately, so it isn't a power issue, it's the cube itself. When I try to use both cubes to mine, the working cube cuts way down on hash rate and the non-working one does not hash at all. I'm confounded. I have no idea what to try next.

something I noticed is the knock-off nib is not removed from the relay not sure if its required but i think its supposed to be done after the circuit board is cleaned

this guy seems to have some avail http://www.napl.co.uk/Tianbo-TRS-12VDC-L-S-Z--PCB-power-switch-relay.html

TRS L-S -Z . Full specs at http://www.tianbo-relay.com/bigimg/45.pdf

heres a .ru site with them too http://www.voltmaster.ru/cgi-bin/qwery.pl?id=66741942&group=31502

ok here's some detailed pictures

pic of relay - K1


yellow box is supposedly for temp short fix red box are removal/replacement points [I have not tested this just providing pictures]

How would one Short these two pins? Wire and electric tape or a solder job? I ask because I have no solder experience.  Thanks!

ive seen this with 2 of my cubes looks like its some sort of power relay issue
check this post for a possible fix https://bitcointalksearch.org/topic/m.5385162
maybe someone has a like to a reliable part replacement looks like a easy desolder/solder job

The deal with "Zope" is a mess, from the Zope 4 site:


So, Zope 3 was a fork of Zope 2 but they did not change the name. What it went on to become was not Zope but BlueBream. It was so confusing that Zope 3 was renamed BlueBream and Zope 2 was renamed Zope 4. Thus Zope 3 and Zope 4 are completely different projects, not just different versions. These guys make usb.org look brilliant when it comes to confusing naming (Quick, which is faster "Full Speed" or "High Speed"?)!

So I guess I give up, I knew better than to try but did anyway.

In the BE, what is the black box on the board right behind the fuse and why would it be "buzzing" or "bizzing".  Now it won't mine, and it has that sound coming out.
Any info would be appreciated.

~D

This is good advice.  This is how I do it myself, but I refrain from recommending it that way anymore.  Why?  

I told a local friend of mine to do that very thing.  I wasn't there in person to help him along.  So, he took the back plate off and then proceeded to lift the cube and turn it over about 4 inches above the table.  

So now I recommend sliding instead.  Gravity sucks, but it's the law!  

Do you have any other versions of Python in:
/Library/Python/

I have other folders with older Python versions but
only a readme file in the folder.
Perhaps move any older versions of Python somewhere else.

I sit in front of my Mac while in a recliner all day.
It took me MANY days and countless hours to get it going.

Good Luck!!!

Ken

I have Python 2.7.5, OSX 10.9.2.

This is why I did not even try earlier, I figured it was going to be a big ball of hurt.

I got the same message about Zope.
I don't remember how I got past it.

I have Zope 4.0.5 in this location:
/Library/Python/2.7/site-packages/zope.interface-4.0.5-py2.7-macosx-10.8-intel.egg
I don't remember what an egg is though
I remember Google does.

Somehow I was able to install it.
Many hours of Googling ...

Perhaps upgrading Python 2.7 did it.

What version of Python is currently installed?
I remember a version is part of 10.8.5.

Just don't bother, literally it won't happen.

There is a 0.16% chance of it happening this week, then 0.11 the next, 0.07 the next etc... cumulatively there is less than a 1 in 200 chance.

Yeah, I did all that.
But step 6 failed

I ran "sudo python setup.py install" again and I get:
"Error: The required version of setuptools (>=2.1) is not available"
So I sudo installed a new version of setup tools.
Then ran "sudo python setup.py install" again and I get:
"Error: Installed distribution zope.interface 3.8.0 conflicts with requirement zope.interface>=4.0.2"

As much as I love python the update mechanisms are killing it, ruby does a much better job updating it's libraries.

Tried on three other Macs, all running current release 10.9.2. One failed with the above error, the other two failed with yet different error messages. What a mess.

So I think: "If someone wrote the instructions why didn't they provide the result for download?" I guess because the dependencies in Python are just to much of a mess to insure functionality on any given system. Good thing they don't build bridges with the same care we build software.

I just wanted to stick it on the side and use it as a lottery ticket tbh

Probably, but I don't know. Its so statistically impossible for one to ever pick up a block, you might as well pool mine and donate it to charity.

Hi,

Using a BE Cube in a Pool and just wanted to know if there's any way mining locally ?

Thank you in advance

I installed it w/o any compiling but I had to install heavens knows what and the kitchen sink to do it. That may not have been the instructions I followed. I will look closer.
I have no idea why compiling a program requires a PHD?
Perhaps some Dr can explain why?
Google was no help.

Here are the steps I followed.
It worked w/o any hicups except
an update that I had to install
later. But wasn't hard:

Installation on Mac
   1.   Download TGZ file from https://github.com/slush0/stratum-mining-proxy/tarball/master
   2.   Unpack it by typing "tar xf slush0-stratum-mining-proxy*.tar.gz"
***I just dbl clicked it and my unpacker "Archiver" unpacked it.

   3.   On Mac OS X you already have Python installed on your system, but you lack the llvm-gcc-4.2 binary required to run the setup.py file, so:
   4.   a) If you don't want to install Xcode, get gcc here: https://github.com/kennethreitz/osx-gcc-installer
   5.   b) OR download Xcode (free) from the App Store, Open it up (it's in your applications folder) and go to preferences, to the downloads section and download/install the 'command line tools'. This will install llvm-gc-4.2.
   6.   Type "sudo python setup.py install" in the unpacked directory from step 2.
***In the terminal type CD space (drag the folder here and it will auto populate the path) return.
***Your now in that directory.

   7.   You can start the proxy by typing "./mining_proxy.py" in the terminal window. Using default settings, proxy connects to Slush's pool interface.
***You need to be in the directory where mining_proxy.py is located.

   8.   If you want to connect to another pool or change other proxy settings, type "mining_proxy.py --help".

N.B. Once Apple releases Xcode 4.7 they will remove the optional install of gcc (they want you to use clang). When that happens you can either choose not to upgrade, or return to the aforementioned https://github.com/kennethreitz/osx-gcc-installer and download the specific gcc binary for your version of Mac OS.

Its a redundant tech, only ASICMiner uses it [on this gen]. No reason to build support for something already dead.

Typical OpenSource crapola, devs spend thousands of hours developing the software but little to none on the final bit to make it usable. Somehow I knew the build would not work and was staying away from trying to compile and install. But I tried anyway andnd I had to install gcc to boot.

Error: The required version of setuptools (>=2.1) is not available

Error: Installed distribution zope.interface 3.8.0 conflicts with requirement zope.interface>=4.0.2

Whatever "setuptools"  is. And how many other things will I find are not available.

I't all like a game, if I wanted to play a game I would get Angry Birds.


I do wonder why there is no pre-compiled version available for the Mac--like for Windows.

tldr, no. You'll need to buy a PSU without that protection. Lots of links in the OP.