[Guide] Dogie's Comprehensive ASICMiner Cube Setup [HD] - page 25.

jeppe

sr. member

Activity: 434

Merit: 251

Quote from: jeppe on February 26, 2014, 12:24:32 PM

Hi,
I have a asic miner cube and have tried 3 different power supplies and the cube powers up for ~2-3 sec then shuts off again (runs for 2 sec with fan spinning then shuts of and makes a click noise)
The psu then dose not respond for some time. After waiting a bit the psu can power back on but crashes again after the 2 sec window, this repeats again and again.
I have read some where that some psu's have load protection, but i think this is not the problem as i have tried with different psu's.
What am i doing wrong Huh

The Main psu I was planing to use was the x-viper 750 watt but dont know why its not working like it should :/
Thanks,
JT

Having problems :/
Please help
https://bitcointalksearch.org/topic/asic-miner-cube-will-not-power-on-help-489015
Thanks,
JT

sgginc

newbie

Activity: 15

Merit: 0

Quote from: DanZaph on February 26, 2014, 10:32:55 AM

Quote from: sgginc on February 26, 2014, 09:47:19 AM

The Cube is hashing at ~32GHs on low clock so everything seems to be OK.

I'm on a Mac 10.8.5 using Stratum Proxy.

Where did you get the Stratum Proxy or did you compile it yourself? Does it support 'Long Poll"? I would really like to try that.

https://github.com/slush0/stratum-mining-proxy

Scroll down to Mac install section.

My cube is showing LP Requests as 164 for a term of 16-20 hrs.

Ken

DanZaph

member

Activity: 104

Merit: 10

Quote from: sgginc on February 26, 2014, 09:47:19 AM

The Cube is hashing at ~32GHs on low clock so everything seems to be OK.

I'm on a Mac 10.8.5 using Stratum Proxy.

Where did you get the Stratum Proxy or did you compile it yourself? Does it support 'Long Poll"? I would really like to try that.

sgginc

newbie

Activity: 15

Merit: 0

I've been reading this forum for over a week.
I'm up to page 38.
Thanks to all for helping.

I have a question about this "WARNING" that keeps repeating:

2014-02-26 06:40:19,176 WARNING proxy getwork_listener._on_submit # [0ms] Share from 'sgginc.worker2' accepted, diff 25
2014-02-26 06:40:19,189 INFO proxy jobs.submit # Submitting cb3abb19
2014-02-26 06:40:19,189 WARNING proxy getwork_listener._on_submit # [0ms] Share from 'sgginc.worker2' accepted, diff 25
2014-02-26 06:40:19,244 INFO proxy getwork_listener._on_authorized # Worker 'sgginc.worker2' asks for new work
2014-02-26 06:40:19,266 INFO proxy getwork_listener._on_authorized # Worker 'sgginc.worker2' asks for new work
2014-02-26 06:40:19,289 INFO proxy getwork_listener._on_authorized # Worker 'sgginc.worker2' asks for new work
2014-02-26 06:40:19,443 INFO proxy jobs.submit # Submitting 8bf5d231
2014-02-26 06:40:19,443 WARNING proxy getwork_listener._on_submit # [0ms] Share from 'sgginc.worker2' accepted, diff 25
...

The Cube is hashing at ~32GHs on low clock so everything seems to be OK.

I'm on a Mac 10.8.5 using Stratum Proxy.
The output above is from my Terminal program.

Thanks ... Ken

Johnshpon3

newbie

Activity: 10

Merit: 0

Quote from: DanZaph on February 24, 2014, 03:58:53 PM

Quote from: Johnshpon3 on February 24, 2014, 06:20:32 AM

Anyway I was in contact with seller and they sent me picture which contact of relay I should shortened.
Problem solved, safety decreased but hashing...for now.

Care to share that information and image?

OK...I hope now it will work...imgur and inserting images here is killing me.
Image:
https://i.imgur.com/9eMElsi.jpg

Best regards

DanZaph

member

Activity: 104

Merit: 10

Quote from: dogie on February 26, 2014, 05:28:39 AM

Sounds like cheap PSU. 500W isn't 500W.

To bolster what dogie states here are a couple of things:

1) What is needed is power at 12 volts, the advertised rating of a PSU is total, here is an example PSU spec:

Notice that the 600W PSU has a lower 12V rating than the 500W model! Yeah, the image doesn't make sense but it is a true copy.
The image is from my witeup on the cube at: http://zaph.com/cube

2) There is an in-rush current on power-up or change to high power, that is something that's not specified, the way around that is a high quality PSU and a rating substantially higher than the minimum required.

One more hint on JLebowskiTheDude's post: Instead of "Slide the main board out." I suggest placing the cube fan end up and removing the case, this helps provide support to the heavy electronics by the table it is resting on. It eliminates doe juggling of the main board and cards. The same applies to reassembling.

dogie

legendary

Activity: 1666

Merit: 1185

dogiecoin.com

Quote from: iameric on February 25, 2014, 11:09:02 PM

Quote from: IanMac91 on February 12, 2014, 06:26:50 PM

When I switch it on with one pcie cable in, the light comes on and the fan doesn't.

When I plug the second pcie cable in, the light and fan comes on and it quickly switches off.

In either case, I cannot connect through the router and use it.

I am using a 500w psu connected without a motherboard.

I read 500w was enough. If I bought a better psu, would it definitely work?

I am having a similar problem I have two of these Erupter cubes.

One works no problem but I'm working on getting the second one functional. If I unplug my working Erupter cube and plug the PCI connectors into the cube giving me trouble it turns on for just a second but then turns off.

Any ideas? Does it need to be reseated or something?
.

Sounds like cheap PSU. 500W isn't 500W.

JLebowskiTheDude

member

Activity: 98

Merit: 10

Quote from: iameric on February 25, 2014, 11:09:02 PM

I am having a similar problem I have two of these Erupter cubes.

One works no problem but I'm working on getting the second one functional. If I unplug my working Erupter cube and plug the PCI connectors into the cube giving me trouble it turns on for just a second but then turns off.

Any ideas? Does it need to be reseated or something?

You should open any new or "new to you" Cube upon arrival. Blades can move during shipping, and the screws on the heatsinks can loosen as well.

Remove the fuse.
Open the Cube. Be careful of the fan and the ports on the back during removal of the casing.
Slide the main board out. Be mindful of the weight. The main board can bow under the weight of the blades/heatsinks.
Make sure the screws to the heatsinks are tightened on each blade and then make sure each blade is firmly seated to the main board.
Move everything back into the Cube. Carefully align each blade into its appropriate slot as you slide the main board back in.
Reconnect the fan and replace the casing. Again be careful of the ports on the back.
Replace the fuse.
Reconnect cables and power up to test.

iameric

newbie

Activity: 28

Merit: 0

Quote from: IanMac91 on February 12, 2014, 06:26:50 PM

When I switch it on with one pcie cable in, the light comes on and the fan doesn't.

When I plug the second pcie cable in, the light and fan comes on and it quickly switches off.

In either case, I cannot connect through the router and use it.

I am using a 500w psu connected without a motherboard.

I read 500w was enough. If I bought a better psu, would it definitely work?

I am having a similar problem I have two of these Erupter cubes.

One works no problem but I'm working on getting the second one functional. If I unplug my working Erupter cube and plug the PCI connectors into the cube giving me trouble it turns on for just a second but then turns off.

Any ideas? Does it need to be reseated or something?

JLebowskiTheDude

member

Activity: 98

Merit: 10

Quote from: stex2009 on February 25, 2014, 07:05:01 PM

This happens with me after every few days. I restart and it all works good. Wonder, what must be causing this!

Often when you start seeing the actual python or C source code spit back from the executable it's a connectivity issue of some kind.

Generally due to mining_proxy.exe not communicating with the stratum server effectively for one reason or another. It can be a result of a temporary issue of internet connectivity on the users end. Or it can also happen during some load balancing on the server end amongst a collection of IP addresses or if pool server changes IP due to some sort of conflict/attacked.

When mining_proxy.exe and the Cube(s) are connecting to a specific server IP and that server IP stops being used, it can fail. When mining_proxy.exe and the Cube gets restarted, it points to a new/fresh IP of the pool and the stratum so everything gets "fixed".

stex2009

legendary

Activity: 1134

Merit: 1000

Quote from: shinaj on February 25, 2014, 04:06:05 PM

For the past two months I have been mining, without incident, using the stratrum proxie on my block cubes. I run the proxie, alternating, from two different systems so I don't believe anything has changed on the PC side, or I would expect one of them to still work. The only thing that I have done, that is different, is try to change pools to a PPC pool to diversify my earnings. Since I attempted to change pools I am no longer able to mine on any pool (including BTCGuild, which I have never had a problem with before. I am receiving error messages, that I cannot decipher and I'm not sure what to do about this. Has anyone else dealt with this problem before, and if so did you find a solution? I will be in your debt, if you can help me with this.
img removed
img removed

This happens with me after every few days. I restart and it all works good. Wonder, what must be causing this!

JLebowskiTheDude

member

Activity: 98

Merit: 10

Quote from: shinaj on February 25, 2014, 04:06:05 PM

For the past two months I have been mining, without incident, using the stratrum proxie on my block cubes. I run the proxie, alternating, from two different systems so I don't believe anything has changed on the PC side, or I would expect one of them to still work. The only thing that I have done, that is different, is try to change pools to a PPC pool to diversify my earnings. Since I attempted to change pools I am no longer able to mine on any pool (including BTCGuild, which I have never had a problem with before. I am receiving error messages, that I cannot decipher and I'm not sure what to do about this. Has anyone else dealt with this problem before, and if so did you find a solution? I will be in your debt, if you can help me with this.

Post your mining_proxy.exe command line syntax. Also post a screenshot of your Cube configuration page(s). A sample of one or two should suffice.

DanZaph

member

Activity: 104

Merit: 10

Quote from: shinaj on February 25, 2014, 04:06:05 PM

For the past two months I have been mining, without incident, using the stratrum proxie on my block cubes. I run the proxie, alternating, from two different systems so I don't believe anything has changed on the PC side, or I would expect one of them to still work. The only thing that I have done, that is different, is try to change pools to a PPC pool to diversify my earnings. Since I attempted to change pools I am no longer able to mine on any pool (including BTCGuild, which I have never had a problem with before. I am receiving error messages, that I cannot decipher and I'm not sure what to do about this. Has anyone else dealt with this problem before, and if so did you find a solution? I will be in your debt, if you can help me with this.

Have you checked that the IP addresses have not changed? If you are running DHCP they could have changed.

BTW, it is possible to "pin" IP addresses under DHCP to the MAC address or Client ID.

shinaj

newbie

Activity: 6

Merit: 0

For the past two months I have been mining, without incident, using the stratrum proxie on my block cubes. I run the proxie, alternating, from two different systems so I don't believe anything has changed on the PC side, or I would expect one of them to still work. The only thing that I have done, that is different, is try to change pools to a PPC pool to diversify my earnings. Since I attempted to change pools I am no longer able to mine on any pool (including BTCGuild, which I have never had a problem with before. I am receiving error messages, that I cannot decipher and I'm not sure what to do about this. Has anyone else dealt with this problem before, and if so did you find a solution? I will be in your debt, if you can help me with this.

http://s21.postimg.org/gyw3usxl3/prob1.png

http://s21.postimg.org/qpy0yilfr/prob2.png

allengrad

newbie

Activity: 12

Merit: 0

*side note. put the drum fan on.

allengrad

newbie

Activity: 12

Merit: 0

Quote from: DanZaph on February 24, 2014, 10:53:53 PM

Quote from: JLebowskiTheDude on February 24, 2014, 10:42:44 PM

Ya think?

Congrats dude! Glad you got it working.
Like I said you had a very weird set of issues to start with. Took a while to track them all down!

Great going getting allengrad setup!
I had forgotten how difficult this IP stuff could be for someone new to it. So many variables.

i had done stuff before, and was screwing with this for 3 days and just got to a point of "i'm screwing something up" between not loading the imgur picture correctly to asking another bud for help....networking definitely isn't my forte...i much prefer the building side of computers

and as far as cooling goes, the house stays around 70, and i have a drum fan i can slam on to freeze her up if need be

JLebowskiTheDude

member

Activity: 98

Merit: 10

Quote from: allengrad on February 24, 2014, 10:45:49 PM

All the success =D

i'm a walking disaster, once again thank you guys(and or gals) so much

Looking good now definitely. Congrats again! Cool

Think of it all as a learning opportunity!

Remember to make sure the Cube stays properly cooled and you should be good from here on out.

DanZaph

member

Activity: 104

Merit: 10

Quote from: JLebowskiTheDude on February 24, 2014, 10:42:44 PM

Ya think?

Congrats dude! Glad you got it working.
Like I said you had a very weird set of issues to start with. Took a while to track them all down!

Great going getting allengrad setup!
I had forgotten how difficult this IP stuff could be for someone new to it. So many variables.

allengrad

newbie

Activity: 12

Merit: 0

https://i.imgur.com/KKQKnfK.png

All the success =D

i'm a walking disaster, once again thank you guys(and or gals) so much

JLebowskiTheDude

member

Activity: 98

Merit: 10

Quote from: allengrad on February 24, 2014, 10:37:22 PM

it appears as though my computer's ip changed. changed settings, all good now. (set pc on static ip to prevent issues in future.)

Ya think?

Congrats dude! Glad you got it working.

Like I said you had a very weird set of issues to start with. Took a while to track them all down!

Topic: [Guide] Dogie's Comprehensive ASICMiner Cube Setup [HD] - page 25. (Read 187363 times)