[Guide] Dogie's Comprehensive Avalon Avalon2 Setup [HD] - page 3.

jimrome

sr. member

Activity: 434

Merit: 250

Quote from: dogie on October 01, 2014, 02:09:10 PM

Quote from: dogepls on October 01, 2014, 01:24:44 PM

Quote from: dogie on October 01, 2014, 01:18:10 PM

Quote from: dogepls on October 01, 2014, 12:56:39 PM

Quote from: dogie on October 01, 2014, 06:58:45 AM

Quote from: dogepls on September 30, 2014, 09:19:20 PM

when i try the raspberry pi method i used the image file included and my raspberry pi just load a bunch of stuff then freezes and it wont connect to the router.

You absolutely sure you imaged the SD card rather than just copying the file onto it?

yep i used windiskimager on a formatted sd card

Hmm I'm not sure, its definitely the right file.

i have the raspberry pi b+, do i need the raspberry b or a for it to work? (im a noob with raspberry pi's)

Not a clue if b+s need a different image, sorry.

You need a B. The A doesn't have an Ethernet port, so you'd need a USB-Ethernet adapter. The image should work fine for the B+ (I think)

dogie

legendary

Activity: 1666

Merit: 1185

dogiecoin.com

Quote from: dogepls on October 01, 2014, 01:24:44 PM

Quote from: dogie on October 01, 2014, 01:18:10 PM

Quote from: dogepls on October 01, 2014, 12:56:39 PM

Quote from: dogie on October 01, 2014, 06:58:45 AM

Quote from: dogepls on September 30, 2014, 09:19:20 PM

when i try the raspberry pi method i used the image file included and my raspberry pi just load a bunch of stuff then freezes and it wont connect to the router.

You absolutely sure you imaged the SD card rather than just copying the file onto it?

yep i used windiskimager on a formatted sd card

Hmm I'm not sure, its definitely the right file.

i have the raspberry pi b+, do i need the raspberry b or a for it to work? (im a noob with raspberry pi's)

Not a clue if b+s need a different image, sorry.

dogepls

newbie

Activity: 16

Merit: 0

Quote from: dogie on October 01, 2014, 01:18:10 PM

Quote from: dogepls on October 01, 2014, 12:56:39 PM

Quote from: dogie on October 01, 2014, 06:58:45 AM

Quote from: dogepls on September 30, 2014, 09:19:20 PM

when i try the raspberry pi method i used the image file included and my raspberry pi just load a bunch of stuff then freezes and it wont connect to the router.

You absolutely sure you imaged the SD card rather than just copying the file onto it?

yep i used windiskimager on a formatted sd card

Hmm I'm not sure, its definitely the right file.

i have the raspberry pi b+, do i need the raspberry b or a for it to work? (im a noob with raspberry pi's)

dogie

legendary

Activity: 1666

Merit: 1185

dogiecoin.com

Quote from: dogepls on October 01, 2014, 12:56:39 PM

Quote from: dogie on October 01, 2014, 06:58:45 AM

Quote from: dogepls on September 30, 2014, 09:19:20 PM

when i try the raspberry pi method i used the image file included and my raspberry pi just load a bunch of stuff then freezes and it wont connect to the router.

You absolutely sure you imaged the SD card rather than just copying the file onto it?

yep i used windiskimager on a formatted sd card

Hmm I'm not sure, its definitely the right file.

dogepls

newbie

Activity: 16

Merit: 0

Quote from: dogie on October 01, 2014, 06:58:45 AM

Quote from: dogepls on September 30, 2014, 09:19:20 PM

when i try the raspberry pi method i used the image file included and my raspberry pi just load a bunch of stuff then freezes and it wont connect to the router.

You absolutely sure you imaged the SD card rather than just copying the file onto it?

yep i used windiskimager on a formatted sd card

dogie

legendary

Activity: 1666

Merit: 1185

dogiecoin.com

Quote from: dogepls on September 30, 2014, 09:19:20 PM

when i try the raspberry pi method i used the image file included and my raspberry pi just load a bunch of stuff then freezes and it wont connect to the router.

You absolutely sure you imaged the SD card rather than just copying the file onto it?

dogepls

newbie

Activity: 16

Merit: 0

when i try the raspberry pi method i used the image file included and my raspberry pi just load a bunch of stuff then freezes and it wont connect to the router.

poncawarrior

newbie

Activity: 48

Merit: 0

Thank You Very Much - - - Luke-Jr - I appreciate - Have a Good-One Steve

Luke-Jr

legendary

Activity: 2576

Merit: 1186

Quote from: poncawarrior on September 11, 2014, 11:05:25 PM

I was fooling around and bought this on ebay - - - Avalon2 BitCoin 105G IT comes with the power adapter and usb cable - - - whats the easy way to hook it up through my computer - If their is suck away - I have another power supply to power this. Thanks Steve

Plug it in, install the driver: http://www.prolific.com.tw/US/ShowProduct.aspx?p_id=225&pcid=41
Download BFGMiner 3.8, and run it: bfgminer -S avalonmm:all

poncawarrior

newbie

Activity: 48

Merit: 0

I was fooling around and bought this on ebay - - - Avalon2 BitCoin 105G IT comes with the power adapter and usb cable - - - whats the easy way to hook it up through my computer - If their is suck away - I have another power supply to power this. Thanks Steve

dogie

legendary

Activity: 1666

Merit: 1185

dogiecoin.com

Totally revamped this guide, updated with new HD pictures, updated to latest style and uploaded to dogiecoin.com

dogie

legendary

Activity: 1666

Merit: 1185

dogiecoin.com

Quote from: xR1pp3Rx on August 02, 2014, 11:48:37 AM

ive got a avolon2 and can not for the life of me figure out how to communicate with it. I have changed the ip and gateway on ipv4 and still can not get any were. why is this so hard to do? can some one send me to a video on how to install firmware on a 703n? I see several how to videos on other tp links but not the 703n and that's the only thing I havnt done yet. can anyone help? if not I have some equipment to sell Undecided

Quote from: xR1pp3Rx on August 02, 2014, 11:48:37 AM

ive got a avolon2 and can not for the life of me figure out how to communicate with it. I have changed the ip and gateway on ipv4 and still can not get any were. why is this so hard to do? can some one send me to a video on how to install firmware on a 703n? I see several how to videos on other tp links but not the 703n and that's the only thing I havnt done yet. can anyone help? if not I have some equipment to sell Undecided

Its identical to other tplinks. But seeing as bfgminer just updated, you can use USB to a windows based PC if that's easier for you?

xR1pp3Rx

newbie

Activity: 4

Merit: 0

ive got a avolon2 and can not for the life of me figure out how to communicate with it. I have changed the ip and gateway on ipv4 and still can not get any were. why is this so hard to do? can some one send me to a video on how to install firmware on a 703n? I see several how to videos on other tp links but not the 703n and that's the only thing I havnt done yet. can anyone help? if not I have some equipment to sell Undecided

Luke-Jr

legendary

Activity: 2576

Merit: 1186

BFGMiner 4.6 (just released) can now support Avalon2 devices - even alongside other devices or more Avalon2 devices.

dogie

legendary

Activity: 1666

Merit: 1185

dogiecoin.com

Quote from: jeffie3z on July 24, 2014, 03:18:49 PM

Can you run more than one Avalon2 miner off of one Raspberry Pi?

Probably a few modules, but after that the Pi might start maxing out.

jeffie3z

newbie

Activity: 14

Merit: 0

Can you run more than one Avalon2 miner off of one Raspberry Pi?

jeffie_3

newbie

Activity: 13

Merit: 0

Quote from: dogie on July 11, 2014, 07:23:45 AM

Quote from: jeffie_3 on July 11, 2014, 07:20:32 AM

Quote from: dogie on July 10, 2014, 05:21:59 PM

Quote from: jeffie3z on July 10, 2014, 04:12:58 PM

New question.
Before I thought about it I had bought two Avalon2 miners. The other arrived today. I know the address of the 1 is 192.168.0.100 When you are setting up the miner. The one is running on that address. How would I access the new one? Do I change the address on the 1st one? If so how? Then use the common address for the 2nd one?

Thanks,

Jeff

Change the address of the first one, yes. Easiest way is to set its address type to DCHP, then your router will give it an address.

O.K. When I change the address. Does it give me a new address to use to log in with? How do I log into the old Avalon2 via the web browser?

When you go DCHP, login to your router and find the list of devices to find the IP your router gave the first device. DCHP just means instead of the Avalon going: "IM AT THIS IP FUCK YOU ALL" it gets what its given.

Thank you so much for your help. I run a machine shop. When I learned to program it was back in the 8088 and 286 days. I have been reading up and learning allot.

dogie

legendary

Activity: 1666

Merit: 1185

dogiecoin.com

Quote from: jeffie_3 on July 11, 2014, 07:20:32 AM

Quote from: dogie on July 10, 2014, 05:21:59 PM

Quote from: jeffie3z on July 10, 2014, 04:12:58 PM

New question.
Before I thought about it I had bought two Avalon2 miners. The other arrived today. I know the address of the 1 is 192.168.0.100 When you are setting up the miner. The one is running on that address. How would I access the new one? Do I change the address on the 1st one? If so how? Then use the common address for the 2nd one?

Thanks,

Jeff

Change the address of the first one, yes. Easiest way is to set its address type to DCHP, then your router will give it an address.

O.K. When I change the address. Does it give me a new address to use to log in with? How do I log into the old Avalon2 via the web browser?

When you go DCHP, login to your router and find the list of devices to find the IP your router gave the first device. DCHP just means instead of the Avalon going: "IM AT THIS IP FUCK YOU ALL" it gets what its given.

jeffie_3

newbie

Activity: 13

Merit: 0

Quote from: dogie on July 10, 2014, 05:21:59 PM

Quote from: jeffie3z on July 10, 2014, 04:12:58 PM

New question.
Before I thought about it I had bought two Avalon2 miners. The other arrived today. I know the address of the 1 is 192.168.0.100 When you are setting up the miner. The one is running on that address. How would I access the new one? Do I change the address on the 1st one? If so how? Then use the common address for the 2nd one?

Thanks,

Jeff

Change the address of the first one, yes. Easiest way is to set its address type to DCHP, then your router will give it an address.

O.K. When I change the address. Does it give me a new address to use to log in with? How do I log into the old Avalon2 via the web browser?

dogie

legendary

Activity: 1666

Merit: 1185

dogiecoin.com

Quote from: jeffie3z on July 10, 2014, 04:12:58 PM

New question.
Before I thought about it I had bought two Avalon2 miners. The other arrived today. I know the address of the 1 is 192.168.0.100 When you are setting up the miner. The one is running on that address. How would I access the new one? Do I change the address on the 1st one? If so how? Then use the common address for the 2nd one?

Thanks,

Jeff

Change the address of the first one, yes. Easiest way is to set its address type to DCHP, then your router will give it an address.

Topic: [Guide] Dogie's Comprehensive Avalon Avalon2 Setup [HD] - page 3. (Read 31331 times)