[Guide] Dogie's Comprehensive Avalon Avalon2 Setup [HD] - page 6.

dogie

legendary

Activity: 1666

Merit: 1185

dogiecoin.com

Quote from: cnupo on June 10, 2014, 09:03:34 PM

Quote from: dogie on June 10, 2014, 06:20:59 PM

Quote from: cnupo on June 10, 2014, 02:37:32 PM

Hi Dogie, do you have an idea where to find the avalon2 single modular's tech support. I have the following issue:

Mining stopped, I have restarted the module and the wrt703 together, the lights went up, all on the module and the 2 ones on the controller which the power supply is connected to. When started cgminer
it recognized the module, connects to the pool and when the hashing have to start the lights on the module + one light on the controller get off, hashing doesn't start just one light on the controller remains on ... that's all. Any suggestions ? huh ...

And it has worked previously?

Absolutely.. for 3 months ... the problem is not on the USb controller, I have 3 more modules .. I swapped the module, the PSU, the cables, tried with and w/o WRT703 with no results, have tested the fan assuming some internal overheat protection can cause such a behavior .. no results ...

Are you suggesting the controller or the single module is faulty?

cnupo

full member

Activity: 155

Merit: 100

Quote from: dogie on June 10, 2014, 06:20:59 PM

Quote from: cnupo on June 10, 2014, 02:37:32 PM

Hi Dogie, do you have an idea where to find the avalon2 single modular's tech support. I have the following issue:

Mining stopped, I have restarted the module and the wrt703 together, the lights went up, all on the module and the 2 ones on the controller which the power supply is connected to. When started cgminer
it recognized the module, connects to the pool and when the hashing have to start the lights on the module + one light on the controller get off, hashing doesn't start just one light on the controller remains on ... that's all. Any suggestions ? huh ...

And it has worked previously?

Absolutely.. for 3 months ... the problem is not on the USb controller, I have 3 more modules .. I swapped the module, the PSU, the cables, tried with and w/o WRT703 with no results, have tested the fan assuming some internal overheat protection can cause such a behavior .. no results ...

dogie

legendary

Activity: 1666

Merit: 1185

dogiecoin.com

Quote from: cnupo on June 10, 2014, 02:37:32 PM

Hi Dogie, do you have an idea where to find the avalon2 single modular's tech support. I have the following issue:

Mining stopped, I have restarted the module and the wrt703 together, the lights went up, all on the module and the 2 ones on the controller which the power supply is connected to. When started cgminer
it recognized the module, connects to the pool and when the hashing have to start the lights on the module + one light on the controller get off, hashing doesn't start just one light on the controller remains on ... that's all. Any suggestions ? huh ...

And it has worked previously?

cnupo

full member

Activity: 155

Merit: 100

Hi Dogie, do you have an idea where to find the avalon2 single modular's tech support. I have the following issue:

Mining stopped, I have restarted the module and the wrt703 together, the lights went up, all on the module and the 2 ones on the controller which the power supply is connected to. When started cgminer
it recognized the module, connects to the pool and when the hashing have to start the lights on the module + one light on the controller get off, hashing doesn't start just one light on the controller remains on ... that's all. Any suggestions ? huh ...

gokhansonmz

newbie

Activity: 16

Merit: 0

pool 1 : stratum+tcp://us-west.multipool.us:8888
pool 1 worker : gokhansonmez.1
pool 1 passwrd: x

i'm send pm

dogie

legendary

Activity: 1666

Merit: 1185

dogiecoin.com

Quote from: gokhansonmz on June 04, 2014, 01:36:21 PM

thank you;
but i don't think hardware problem; some think software problem... but i can't found how to fixes software

how to firmware upgrade procedure,

only wr703n upgrade
or reflash raspberry pi bord sd memory ?

I think with the new software update is now not see the cards of avalon

You sure your pool details are correct? That can cause issues. Must be in the right format.

gokhansonmz

newbie

Activity: 16

Merit: 0

thank you;
but i don't think hardware problem; some think software problem... but i can't found how to fixes software

how to firmware upgrade procedure,

only wr703n upgrade
or reflash raspberry pi bord sd memory ?

I think with the new software update is now not see the cards of avalon

dogie

legendary

Activity: 1666

Merit: 1185

dogiecoin.com

Quote from: gokhansonmz on June 04, 2014, 01:06:39 PM

yes i'm tested back to old working firmware but but same problem Sad

Then its likely something hardware based. You're not running the hardware as in the OP so its hard to know what that CN clone is doing.

gokhansonmz

newbie

Activity: 16

Merit: 0

yes i'm tested back to old working firmware but but same problem Sad

dogie

legendary

Activity: 1666

Merit: 1185

dogiecoin.com

You've answered it yourself, the answer is to go back to the old firmware.

gokhansonmz

newbie

Activity: 16

Merit: 0

I actually started again many times.
avalon had on the first firmware and was taking too much reject; For this reason I want to install the new firmware;
am in this situation; I've seen too many complaints about it connetcion refused , but unfortunately no solution has not: (

A few photos from avalon

http://i.hizliresim.com/593nmM.jpg

http://i.hizliresim.com/aqaNMR.jpg
http://i.hizliresim.com/VpGzXq.jpg

is it posible ? connect to avalon2 to usb and mining ?
remove wrt modül
how to fix avalon2

4 days I could not find a solution: (

dogie

legendary

Activity: 1666

Merit: 1185

dogiecoin.com

Quote from: gokhansonmz on June 04, 2014, 07:32:34 AM

[Firmware Version] => 20140526
cgminer: 444d457
cgminer-openwrt-packages: b7b7afe
luci: b66161d
Socket connect failed: Connection refused

avalon 2
Posted from Bitcointa.lk - #In6pMf0TyhkSdDX6

I mean PC, Pi etc. You'll likely get that error if there are no devices connected (or powered) properly, else need to restart a few times. You running custom Avalon package?

gokhansonmz

newbie

Activity: 16

Merit: 0

[Firmware Version] => 20140526
cgminer: 444d457
cgminer-openwrt-packages: b7b7afe
luci: b66161d
Socket connect failed: Connection refused

avalon 2
Posted from Bitcointa.lk - #In6pMf0TyhkSdDX6

dogie

legendary

Activity: 1666

Merit: 1185

dogiecoin.com

Quote from: gokhansonmz on June 04, 2014, 06:54:38 AM

how to fix Connection refused problem after firmware update

Please help;

What type of controller?

gokhansonmz

newbie

Activity: 16

Merit: 0

how to fix Connection refused problem after firmware update

Please help;

dogie

legendary

Activity: 1666

Merit: 1185

dogiecoin.com

Quote from: herbiehasher on May 20, 2014, 09:51:38 AM

Quote from: jimrome on May 17, 2014, 02:27:57 AM

Quote from: herbiehasher on May 16, 2014, 08:18:55 PM

Mr Doggie, I used the RPI image you posted on this thread on the first page, who made it? Who has the pw's and how do you get the www running on it?

On first login pw will be root / blank (blank = no password). It will be set with a pw afterwards.

FW development seems to be handled exclusively by Canaan Creative, and he linked to their software repository in the OP. There is a wiki entry which you may want to read that outlines some of the basics: https://en.bitcoin.it/wiki/Avalon2

Yes, I tried the rpi firmware from there, login as root and pw blank, is not it.

Maybe they compiled the image wrong :/

herbiehasher

member

Activity: 100

Merit: 10

Quote from: jimrome on May 17, 2014, 02:27:57 AM

Quote from: herbiehasher on May 16, 2014, 08:18:55 PM

Mr Doggie, I used the RPI image you posted on this thread on the first page, who made it? Who has the pw's and how do you get the www running on it?

On first login pw will be root / blank (blank = no password). It will be set with a pw afterwards.

FW development seems to be handled exclusively by Canaan Creative, and he linked to their software repository in the OP. There is a wiki entry which you may want to read that outlines some of the basics: https://en.bitcoin.it/wiki/Avalon2

Yes, I tried the rpi firmware from there, login as root and pw blank, is not it.

dogie

legendary

Activity: 1666

Merit: 1185

dogiecoin.com

Quote from: jimrome on May 17, 2014, 02:27:57 AM

Quote from: herbiehasher on May 16, 2014, 08:18:55 PM

Mr Doggie, I used the RPI image you posted on this thread on the first page, who made it? Who has the pw's and how do you get the www running on it?

On first login pw will be root / blank (blank = no password). It will be set with a pw afterwards.

FW development seems to be handled exclusively by Canaan Creative, and he linked to their software repository in the OP. There is a wiki entry which you may want to read that outlines some of the basics: https://en.bitcoin.it/wiki/Avalon2

Yep, and this is Avalon software directly.

jimrome

sr. member

Activity: 434

Merit: 250

Quote from: herbiehasher on May 16, 2014, 08:18:55 PM

Mr Doggie, I used the RPI image you posted on this thread on the first page, who made it? Who has the pw's and how do you get the www running on it?

On first login pw will be root / blank (blank = no password). It will be set with a pw afterwards.

FW development seems to be handled exclusively by Canaan Creative, and he linked to their software repository in the OP. There is a wiki entry which you may want to read that outlines some of the basics: https://en.bitcoin.it/wiki/Avalon2

herbiehasher

member

Activity: 100

Merit: 10

Mr Doggie, I used the RPI image you posted on this thread on the first page, who made it? Who has the pw's and how do you get the www running on it?

Topic: [Guide] Dogie's Comprehensive Avalon Avalon2 Setup [HD] - page 6. (Read 31332 times)