New question.
Before I thought about it I had bought two Avalon2 miners. The other arrived today. I know the address of the 1 is 192.168.0.100 When you are setting up the miner. The one is running on that address. How would I access the new one? Do I change the address on the 1st one? If so how? Then use the common address for the 2nd one?
Thanks,
Jeff
Topic: [Guide] Dogie's Comprehensive Avalon Avalon2 Setup [HD] - page 4. (Read 31331 times)
Looks fine to me. Utility is a bit higher though. You got the difficulty set correctly?
Difficulty? Where is that setting? I haven't changed any setting. All I did was set the password and entered in the miners and address's It is all still factory settings.
It will be at your pool unless it already has auto difficulty.
It's auto I believe.
I really don't understand, but it is now working. Last night I added a small miner I picked up. Want to use it to explore other coins. While the larger miners worked away. It is a Klondike K16. As soon as I added it to the works. The Avalon ramped up to 110 GH/s for the1st time . Been running great since. Thought I would share this. So if knows why this changed everything, it could help them if they are having trouble. I would like to thank Dogie for all of his help.. Thank you..
Jeff
Looks fine to me. Utility is a bit higher though. You got the difficulty set correctly?
Difficulty? Where is that setting? I haven't changed any setting. All I did was set the password and entered in the miners and address's It is all still factory settings.
It will be at your pool unless it already has auto difficulty.
It's auto I believe.
Looks fine to me. Utility is a bit higher though. You got the difficulty set correctly?
Difficulty? Where is that setting? I haven't changed any setting. All I did was set the password and entered in the miners and address's It is all still factory settings.
It will be at your pool unless it already has auto difficulty.
Looks fine to me. Utility is a bit higher though. You got the difficulty set correctly?
Difficulty? Where is that setting? I haven't changed any setting. All I did was set the password and entered in the miners and address's It is all still factory settings.
Looks fine to me. Utility is a bit higher though. You got the difficulty set correctly?
How do I post a screen shot
Upload it to imgur and give me a link.
How do I post a screen shot
I received an Avalon2 105 about a week and a half ago. Just found time to set it up. I'm only getting 25 to 30 GH/s. I have more rejected than accepted. Running a 600 watt supply Raspberry Pi.
Anyone have any idea?
Exactly what PSU is it?Anyone have any idea?
I am running CoolMax 80 Plus ZX series 600 watt.
You'll need to test with another PSU, as its unusual to get some but degraded performance when something isnt working.
Thank you, after lunch I will put another one on it and try it. Will post what I find.
O.K. in the miner status it is reporting 110,861 MHSAV. On eclipse it is reporting 15.8 GH/s. My other miners are reporting close to the same numbers in eclipse as what is reported by the miner. I'm also using MultiMiner to watch the miners. The avalon2 is the only one that doesn't show up in MultiMiner.
Changing the power supply doesn't seem to make any difference.
Try a more standard pool like btcguild.
I will try that one this evening. I tried it on slush's also same results.
Ok. Take me a screenshot of the miner interface then.
Is this the area you need?
I received an Avalon2 105 about a week and a half ago. Just found time to set it up. I'm only getting 25 to 30 GH/s. I have more rejected than accepted. Running a 600 watt supply Raspberry Pi.
Anyone have any idea?
Exactly what PSU is it?Anyone have any idea?
I am running CoolMax 80 Plus ZX series 600 watt.
You'll need to test with another PSU, as its unusual to get some but degraded performance when something isnt working.
Thank you, after lunch I will put another one on it and try it. Will post what I find.
O.K. in the miner status it is reporting 110,861 MHSAV. On eclipse it is reporting 15.8 GH/s. My other miners are reporting close to the same numbers in eclipse as what is reported by the miner. I'm also using MultiMiner to watch the miners. The avalon2 is the only one that doesn't show up in MultiMiner.
Changing the power supply doesn't seem to make any difference.
Try a more standard pool like btcguild.
I will try that one this evening. I tried it on slush's also same results.
Ok. Take me a screenshot of the miner interface then.
I received an Avalon2 105 about a week and a half ago. Just found time to set it up. I'm only getting 25 to 30 GH/s. I have more rejected than accepted. Running a 600 watt supply Raspberry Pi.
Anyone have any idea?
Exactly what PSU is it?Anyone have any idea?
I am running CoolMax 80 Plus ZX series 600 watt.
You'll need to test with another PSU, as its unusual to get some but degraded performance when something isnt working.
Thank you, after lunch I will put another one on it and try it. Will post what I find.
O.K. in the miner status it is reporting 110,861 MHSAV. On eclipse it is reporting 15.8 GH/s. My other miners are reporting close to the same numbers in eclipse as what is reported by the miner. I'm also using MultiMiner to watch the miners. The avalon2 is the only one that doesn't show up in MultiMiner.
Changing the power supply doesn't seem to make any difference.
Try a more standard pool like btcguild.
I will try that one this evening. I tried it on slush's also same results.
I received an Avalon2 105 about a week and a half ago. Just found time to set it up. I'm only getting 25 to 30 GH/s. I have more rejected than accepted. Running a 600 watt supply Raspberry Pi.
Anyone have any idea?
Exactly what PSU is it?Anyone have any idea?
I am running CoolMax 80 Plus ZX series 600 watt.
You'll need to test with another PSU, as its unusual to get some but degraded performance when something isnt working.
Thank you, after lunch I will put another one on it and try it. Will post what I find.
O.K. in the miner status it is reporting 110,861 MHSAV. On eclipse it is reporting 15.8 GH/s. My other miners are reporting close to the same numbers in eclipse as what is reported by the miner. I'm also using MultiMiner to watch the miners. The avalon2 is the only one that doesn't show up in MultiMiner.
Changing the power supply doesn't seem to make any difference.
Try a more standard pool like btcguild.
I received an Avalon2 105 about a week and a half ago. Just found time to set it up. I'm only getting 25 to 30 GH/s. I have more rejected than accepted. Running a 600 watt supply Raspberry Pi.
Anyone have any idea?
Exactly what PSU is it?Anyone have any idea?
I am running CoolMax 80 Plus ZX series 600 watt.
You'll need to test with another PSU, as its unusual to get some but degraded performance when something isnt working.
Thank you, after lunch I will put another one on it and try it. Will post what I find.
O.K. in the miner status it is reporting 110,861 MHSAV. On eclipse it is reporting 15.8 GH/s. My other miners are reporting close to the same numbers in eclipse as what is reported by the miner. I'm also using MultiMiner to watch the miners. The avalon2 is the only one that doesn't show up in MultiMiner.
Changing the power supply doesn't seem to make any difference.
I received an Avalon2 105 about a week and a half ago. Just found time to set it up. I'm only getting 25 to 30 GH/s. I have more rejected than accepted. Running a 600 watt supply Raspberry Pi.
Anyone have any idea?
Exactly what PSU is it?Anyone have any idea?
I am running CoolMax 80 Plus ZX series 600 watt.
You'll need to test with another PSU, as its unusual to get some but degraded performance when something isnt working.
Thank you, after lunch I will put another one on it and try it. Will post what I find.
I received an Avalon2 105 about a week and a half ago. Just found time to set it up. I'm only getting 25 to 30 GH/s. I have more rejected than accepted. Running a 600 watt supply Raspberry Pi.
Anyone have any idea?
Exactly what PSU is it?Anyone have any idea?
I am running CoolMax 80 Plus ZX series 600 watt.
You'll need to test with another PSU, as its unusual to get some but degraded performance when something isnt working.
I received an Avalon2 105 about a week and a half ago. Just found time to set it up. I'm only getting 25 to 30 GH/s. I have more rejected than accepted. Running a 600 watt supply Raspberry Pi.
Anyone have any idea?
Exactly what PSU is it?Anyone have any idea?
I am running CoolMax 80 Plus ZX series 600 watt.
I received an Avalon2 105 about a week and a half ago. Just found time to set it up. I'm only getting 25 to 30 GH/s. I have more rejected than accepted. Running a 600 watt supply Raspberry Pi.
Anyone have any idea?
Exactly what PSU is it? Anyone have any idea?
I received an Avalon2 105 about a week and a half ago. Just found time to set it up. I'm only getting 25 to 30 GH/s. I have more rejected than accepted. Running a 600 watt supply Raspberry Pi.
Anyone have any idea?
Anyone have any idea?
Added anchor links to contents.
Jump to: