Pages:
Author

Topic: [GUIDE] How to rent your rig on LEASERIG.NET - Scrypt & SHA256 - page 5. (Read 33446 times)

E
full member
Activity: 234
Merit: 100
I had been having significant issues with LRP and my machine over the past two days. Luckily it only affected me and not customers.

Anyway, I was using stratum+tcp://stratum.mining.eligius.st:3334 as my default pool in pools.conf, and whenever LRP swtiched back to that after a lease it would start disconnecting from eligius and reconnecting, over and over very rapidly.

In all, this took my production from 3TH to ~1.5 while not leased. I watched LRP carefully during leases and it performed beautifully!

I upgraded to v0.05e, but the same behavior resulted.

Finally, I remembered that my KNC miner had similar problems with eligius, and that eligius has a "KNC Port" at stratum+tcp://stratum.mining.eligius.st:12234

I switched to port 12234 and everything has been great since then (except that I initially forgot to change the port on the leaserig config page and it switched back to 3334 Smiley )


Also, LRP has been reporting my speed at sometimes up to double what is actually hashing. I'm using the api method, and I see speed reports from all the right IPs that look reasonable and add up to 3TH. On leaserig, however, I see ~5-6TH!


Other than that -- this has been great so far! Thanks for creating it.

E
newbie
Activity: 39
Merit: 0
What if I have a Pi?  Then No? No Leaserig proxy?  Sad Sad  Cry

I'll sign a nondisclosure and compile the pos for amd64 and armv61

or just send you directions.   Mostly type make Smiley



miaviator,

I'm running 2 RPI's with the LRP and haven't had any issues.  Just run it from a Linux or Windows box on your LAN (I know you have some dedicated machines around) or even run it as a Service if you don't like having the CMD box open/minimized.  I know you're asking for an installer so you can run it entirely on an RPI, but saying that users with RPI's cant use LRP is slightly innacurate.

FYI, I run mine with the API listening ports enabled so I get accurate hashrates and everything is peachy.  You might need to poke some holes in your local firewall to make things work, but once you point your RPIs at the machine running LRP it makes things actually easier to manage pools and such (especially if you're running more than 1 RPI)

Msg me if you want specifics on my configuration settings.

-EMoomjean
full member
Activity: 126
Merit: 100
Perfect. Thanks!
hero member
Activity: 588
Merit: 520
With 'pools' section, are you referring to LeaseRig pool management on frontend?

If yes, then yes, this is basically a copy of data that is sent from cgminer; using LRP is no different - this is copy of data that LRP holds.

Default pools are only used when lease is over; LeaseRig performs switch, add default pool, switch to them and remove the other pools.

Type of rig is just a method to organize your rig - to let customer know what algo you are hashing so there is no confusion. Pools are not related to that.

You can change priority by pushing pools on top with switch button. You can create any kind of priority list that way.
full member
Activity: 126
Merit: 100
Quick question regarding back up pools. If I'm mining at pool1, as defined in the 'pools' section and it fails, which pool will take over, the next pool in the 'Pools' section or the 'default pools' in the configuration section?

Also does the type of scrypt that the rig is listed as matter when it comes to pools? IE. will it fail over to a scrypt coin when my primary coin in Dark.

By failover I mean when a pool fails and we automatically swap to the next pool without touching the mining config.

Thanks in advance,

M

PS. Is it possible to change the priority within the 'pools' section
legendary
Activity: 1708
Merit: 1036
I wound up using the LRP option as I couldn't figure out the other option quickly. I gave a refund to the first renter. Just hope things are stable from here out. Thanks a lot for your excellent feedback and help

Plagiarizing?  Grin

Just kidding, and welcome!
member
Activity: 63
Merit: 10
I wound up using the LRP option as I couldn't figure out the other option quickly. I gave a refund to the first renter. Just hope things are stable from here out. Thanks a lot for your excellent feedback and help
member
Activity: 84
Merit: 10
PM for journalist,typing,and data entry services.
Do the instructions still apply to antminers as they are configured web interface? just go into there and set the pool info?

Yep, place LRP on one of your computers, then point your antminers to that computers IP, simple as that.

Haha thanks mate, will I be required to place a security deposit? No need to rush, miners won't be acquired till april.
sr. member
Activity: 462
Merit: 250
Lux e tenebris
New LRP version

Quote
v0.05e
- support for unofficial client.reconnect method in stratum protocol

I wasn't able to fully test this one, I don't have SHA rigs so I only tried on single GPU worker. Let me know if there are any issues regarding it.

That's great news. We'll try it out and let you know. Thanks op, you're a star.
hero member
Activity: 588
Merit: 520
Do the instructions still apply to antminers as they are configured web interface? just go into there and set the pool info?

Yep, place LRP on one of your computers, then point your antminers to that computers IP, simple as that.
member
Activity: 84
Merit: 10
PM for journalist,typing,and data entry services.
Do the instructions still apply to antminers as they are configured web interface? just go into there and set the pool info?
hero member
Activity: 588
Merit: 520
What flashing must you do to the antminer? Would like to start doing this, and will be running probably exclusively antminers.

To the latest firmware. Tigggger can tell you more about it.
member
Activity: 84
Merit: 10
PM for journalist,typing,and data entry services.
What flashing must you do to the antminer? Would like to start doing this, and will be running probably exclusively antminers.
hero member
Activity: 588
Merit: 520
New LRP version

Quote
v0.05e
- support for unofficial client.reconnect method in stratum protocol

I wasn't able to fully test this one, I don't have SHA rigs so I only tried on single GPU worker. Let me know if there are any issues regarding it.
donator
Activity: 686
Merit: 519
It's for the children!
donator
Activity: 686
Merit: 519
It's for the children!
Dick


build it for the Pi or give me some source to compile.

 sudo apt-get install libc6-dev-i386
Reading package lists... Done
Building dependency tree
Reading state information... Done
E: Unable to locate package libc6-dev-i386
donator
Activity: 686
Merit: 519
It's for the children!
Dick


build it for the Pi or give me some source to compile.
hero member
Activity: 588
Merit: 520
You are the only one reporting this issue.
member
Activity: 60
Merit: 10
Might not be till next week, but I'll try Windows. (it hurts to say that you know...)
hero member
Activity: 588
Merit: 520
Can you try Windows version?
Pages:
Jump to: