Topic: [GUIDE][AMD][NVIDIA][CPU][XMR]How to Mine Monero/RYO + Miners Downloads 💲⛏ - page 22. (Read 171785 times)
October 28, 2017, 09:01:08 AM
Thank you for the well written and updated guide! It was very helpful.
October 28, 2017, 06:18:21 AM
Updated: Sumokoin info
October 26, 2017, 06:41:16 AM
Guide updated with Sumokoin
October 23, 2017, 01:19:07 PM
Ok, I have switched back to sgminer from xmr-stak-2.0. Sgminer gives me slightly more hashes (2602h/sec vs 2590h/sec average) and my rig uses a bit less power with sgminer (345 vs 350 Watt). Also it has 0% dev fee vs 1% for xmr-stak.
It's not meant for stable mining. You can disable fees when building in donate-level.h. You might tried 2 threads and also play with intensity, it seems to be different from AMD version. October 22, 2017, 03:04:27 PM
I tried the --nocpu parameter, but it does not exist:
[2017-10-21 19:02:15] : Parameter unknown '--nocpu'
Press any key to exit.
Back to sgminer again
UPDATE: Wow, the correct parameter is '--noCPU' (https://github.com/fireice-uk/xmr-stak/blob/dev/doc/usage.md#command-line-options), case-sensitive... on Windows! What do you know.
I've updated the instructions for XMR-STAK, I haven't tried it without CPU yet [2017-10-21 19:02:15] : Parameter unknown '--nocpu'
Press any key to exit.
Back to sgminer again
UPDATE: Wow, the correct parameter is '--noCPU' (https://github.com/fireice-uk/xmr-stak/blob/dev/doc/usage.md#command-line-options), case-sensitive... on Windows! What do you know.
The hashrate is little bit lower then with XMR-STAK-AMD, but it's only pre-release. I will update Windows binary every week if there will be changes.Ok, I have switched back to sgminer from xmr-stak-2.0. Sgminer gives me slightly more hashes (2602h/sec vs 2590h/sec average) and my rig uses a bit less power with sgminer (345 vs 350 Watt). Also it has 0% dev fee vs 1% for xmr-stak.
October 22, 2017, 11:23:17 AM
I tried the new xmr-stak but not sure how multiple threads work
I tried 6 threads on 3 cards but got weird results followed by crash
3 Vega Fe with 64GB ram
5.6 MH/s , pity it wasn't real!
https://www.imageupload.co.uk/image/DOE7
currently running 3 gpu threads at 2016 for 4350
I played around with other higher numbers but kept locking up
That would be great I tried 6 threads on 3 cards but got weird results followed by crash
3 Vega Fe with 64GB ram
5.6 MH/s
, pity it wasn't real!https://www.imageupload.co.uk/image/DOE7
currently running 3 gpu threads at 2016 for 4350
I played around with other higher numbers but kept locking up
There are VEGA recommended values for XMR-STAK for 2 threads in the VEGA thread.
This is unofficial pre-release... it might not be stable enough.
October 22, 2017, 10:27:35 AM
I tried the new xmr-stak but not sure how multiple threads work
I tried 6 threads on 3 cards but got weird results followed by crash
3 Vega Fe with 64GB ram
5.6 MH/s , pity it wasn't real!
https://www.imageupload.co.uk/image/DOE7
currently running 3 gpu threads at 2016 for 4350
I played around with other higher numbers but kept locking up
I tried 6 threads on 3 cards but got weird results followed by crash
3 Vega Fe with 64GB ram
5.6 MH/s
, pity it wasn't real!https://www.imageupload.co.uk/image/DOE7
currently running 3 gpu threads at 2016 for 4350
I played around with other higher numbers but kept locking up
October 22, 2017, 03:18:29 AM
I tried the --nocpu parameter, but it does not exist:
[2017-10-21 19:02:15] : Parameter unknown '--nocpu'
Press any key to exit.
Back to sgminer again
UPDATE: Wow, the correct parameter is '--noCPU' (https://github.com/fireice-uk/xmr-stak/blob/dev/doc/usage.md#command-line-options), case-sensitive... on Windows! What do you know.
I've updated the instructions for XMR-STAK, I haven't tried it without CPU yet [2017-10-21 19:02:15] : Parameter unknown '--nocpu'
Press any key to exit.
Back to sgminer again
UPDATE: Wow, the correct parameter is '--noCPU' (https://github.com/fireice-uk/xmr-stak/blob/dev/doc/usage.md#command-line-options), case-sensitive... on Windows! What do you know.
The hashrate is little bit lower then with XMR-STAK-AMD, but it's only pre-release. I will update Windows binary every week if there will be changes. October 21, 2017, 12:03:26 PM
Ok, so I tried it, but had some struggles. First it didn't start properly, because there was a part missing in the generated amd.txt about "gpu_thread_num". Luckely I had my old config file so I could add this part to the amd.txt config. But then I noticed that this new miner also uses my CPU and I couldn't find where to turn this off. It also complains about "Memory alloc failed: virtualAlloc failed" errors all the time. I have LARGE PAGE SUPPORT configured properly. Overall my hashrate went down from 2600 h/sec to 1800 h/sec so I am back to sgminer.
Yeah, I will add these instructions. Just make bat file with --nocpu, I wrote about the problem with gpus thread just put the line from instructions here to the AMD.txt and change number of cards or thread if you use 2 threads.[2017-10-21 19:02:15] : Parameter unknown '--nocpu'
Press any key to exit.
Back to sgminer again
UPDATE: Wow, the correct parameter is '--noCPU' (https://github.com/fireice-uk/xmr-stak/blob/dev/doc/usage.md#command-line-options), case-sensitive... on Windows! What do you know.
October 21, 2017, 11:22:04 AM
Ok, so I tried it, but had some struggles. First it didn't start properly, because there was a part missing in the generated amd.txt about "gpu_thread_num". Luckely I had my old config file so I could add this part to the amd.txt config. But then I noticed that this new miner also uses my CPU and I couldn't find where to turn this off. It also complains about "Memory alloc failed: virtualAlloc failed" errors all the time. I have LARGE PAGE SUPPORT configured properly. Overall my hashrate went down from 2600 h/sec to 1800 h/sec so I am back to sgminer.
Yeah, I will add these instructions. Just make bat file with --nocpu, I wrote about the problem with gpus thread just put the line from instructions here to the AMD.txt and change number of cards or thread if you use 2 threads. October 21, 2017, 09:21:11 AM
Did you build this yourself? I switched recently from xmr-stak-amd to sgminer, because xmr-stak-amd was just 'freezing' after a while. It's just like people are mentioning in https://github.com/fireice-uk/xmr-stak-amd/issues/110. Sgminer doesn't seem to crash, at least not since i started it. I really liked xmr-stak-amd because of the webinterface and the statistics. However, i see that issue 110 is still open, so i am not sure if i should try xmr-stak again. It is really annnoying to see that my rig is eating electricity, but no hashes are generated.
Yes I've built it, it has some bugs, this bug occured also in seperate versions sometimes. You may try it now, we fixed some build problems, download again.Ok, so I tried it, but had some struggles. First it didn't start properly, because there was a part missing in the generated amd.txt about "gpu_thread_num". Luckely I had my old config file so I could add this part to the amd.txt config. But then I noticed that this new miner also uses my CPU and I couldn't find where to turn this off. It also complains about "Memory alloc failed: virtualAlloc failed" errors all the time. I have LARGE PAGE SUPPORT configured properly. Overall my hashrate went down from 2600 h/sec to 1800 h/sec so I am back to sgminer.
October 21, 2017, 07:55:54 AM
Did you build this yourself? I switched recently from xmr-stak-amd to sgminer, because xmr-stak-amd was just 'freezing' after a while. It's just like people are mentioning in https://github.com/fireice-uk/xmr-stak-amd/issues/110. Sgminer doesn't seem to crash, at least not since i started it. I really liked xmr-stak-amd because of the webinterface and the statistics. However, i see that issue 110 is still open, so i am not sure if i should try xmr-stak again. It is really annnoying to see that my rig is eating electricity, but no hashes are generated.
Yes I've built it, it has some bugs, this bug occured also in seperate versions sometimes. You may try it now, we fixed some build problems, download again. October 21, 2017, 05:00:59 AM
Added: XMR-STAK - Unified All-in-one Monero miner (AMD,NVIDIA,CPU), release https://github.com/IndeedMiners/xmr-stak/releases/ source https://github.com/fireice-uk/xmr-stak
Updated: Dev fee correction
Updated: Dev fee correction
Did you build this yourself? I switched recently from xmr-stak-amd to sgminer, because xmr-stak-amd was just 'freezing' after a while. It's just like people are mentioning in https://github.com/fireice-uk/xmr-stak-amd/issues/110. Sgminer doesn't seem to crash, at least not since i started it. I really liked xmr-stak-amd because of the webinterface and the statistics. However, i see that issue 110 is still open, so i am not sure if i should try xmr-stak again. It is really annnoying to see that my rig is eating electricity, but no hashes are generated.
October 20, 2017, 02:26:12 PM
Added: XMR-STAK - Unified All-in-one Monero miner (AMD,NVIDIA,CPU), release https://github.com/IndeedMiners/xmr-stak/releases/ source https://github.com/fireice-uk/xmr-stak
Updated: Dev fee correction
Updated: Dev fee correction
October 18, 2017, 01:46:11 PM
Added: XMRig Nvidia
https://github.com/xmrig/xmrig-nvidia/releases
https://github.com/xmrig/xmrig-nvidia/releases
October 15, 2017, 08:59:32 PM
Thanks for this. I just put into consideration to start this set up this coming week. What a valuable insight.
October 15, 2017, 08:28:13 AM
Hi ya all, pardon my ignorance being a newbie in xmr,
Just a curious question, is it normal in sgminer-gm 5.5.5 mining xmr with poworcolor rx470 4g(elpida) clocking 1106@2025 to have such a big difference in hash rate(-20%) in the same hardware different os, same config --rawintensity 752 -w 8 -g 2,
windows10(beta blockchain 11aug)
avg 861h/s each gpu
linux ubuntu 17.04(dagfix installed)
avg 695h/s each gpu
while mining ethereum, I got 30mh/s in windows, a fraction bit lower 29.6mh in linux with the same conditions.
Please lead me to the right direction and point me out what could be wrong?
Thank you so much.
Just a curious question, is it normal in sgminer-gm 5.5.5 mining xmr with poworcolor rx470 4g(elpida) clocking 1106@2025 to have such a big difference in hash rate(-20%) in the same hardware different os, same config --rawintensity 752 -w 8 -g 2,
windows10(beta blockchain 11aug)
avg 861h/s each gpu
linux ubuntu 17.04(dagfix installed)
avg 695h/s each gpu
while mining ethereum, I got 30mh/s in windows, a fraction bit lower 29.6mh in linux with the same conditions.
Please lead me to the right direction and point me out what could be wrong?
Thank you so much.
Having same problem. You can put higher intensity, but gpu threads does nothing in linux, at least for me.
October 15, 2017, 08:24:36 AM
Thank you for your guide and download file. I can download clymore cpu miner . Thx
October 15, 2017, 08:10:26 AM
i get around 925hs 1130/2050 approx 85-90w for the whole gpu for a sapphire 470 8g
That's very good, what miner do you use?sgminer 5.5.5 gm
What parameters do you use under linux? I get 1k on windows with sgminer, but a lot less on linux with same parameters: ri 896, w 8, g 2. Found that gpu threads don't really have an effect in linux (it's like it's stuck to 1).
October 15, 2017, 07:55:39 AM
Hi ya all, pardon my ignorance being a newbie in xmr,
Just a curious question, is it normal in sgminer-gm 5.5.5 mining xmr with poworcolor rx470 4g(elpida) clocking 1106@2025 to have such a big difference in hash rate(-20%) in the same hardware different os, same config --rawintensity 752 -w 8 -g 2,
windows10(beta blockchain 11aug)
avg 861h/s each gpu
linux ubuntu 17.04(dagfix installed)
avg 695h/s each gpu
while mining ethereum, I got 30mh/s in windows, a fraction bit lower 29.6mh in linux with the same conditions.
Please lead me to the right direction and point me out what could be wrong?
Thank you so much.
Just a curious question, is it normal in sgminer-gm 5.5.5 mining xmr with poworcolor rx470 4g(elpida) clocking 1106@2025 to have such a big difference in hash rate(-20%) in the same hardware different os, same config --rawintensity 752 -w 8 -g 2,
windows10(beta blockchain 11aug)
avg 861h/s each gpu
linux ubuntu 17.04(dagfix installed)
avg 695h/s each gpu
while mining ethereum, I got 30mh/s in windows, a fraction bit lower 29.6mh in linux with the same conditions.
Please lead me to the right direction and point me out what could be wrong?
Thank you so much.
Having same problem. You can put higher intensity, but gpu threads does nothing in linux, at least for me.
Jump to: