Topic: [GUIDE][AMD][NVIDIA][CPU][XMR]How to Mine Monero/RYO + Miners Downloads 💲⛏ - page 7. (Read 171785 times)
April 12, 2018, 02:20:05 AM
They are both 8gb, why 580 hash better on sumo and rx 480 hash better on monero , that is what i don~t understand? They are all set to 1170/2100 and 910mv.
April 12, 2018, 01:59:59 AM
I don`t understand why when mining on rx580 monero it hashes with 820h/s but when mining Sumo it hashes 920h/s . When mining with rx480 it hashes on monero 950 , but on sumo 750h , what the hell is going on? I tried it with different miners , what is the logic?
CN-Heavy needs more memory, so 8GB cards have higher hashrate now. April 12, 2018, 01:27:09 AM
I don`t understand why when mining on rx580 monero it hashes with 820h/s but when mining Sumo it hashes 920h/s . When mining with rx480 it hashes on monero 950 , but on sumo 750h , what the hell is going on? I tried it with different miners , what is the logic?
April 11, 2018, 04:27:26 PM
Thanks for answering. I use SMOS and Cast-XMR is not currently supported.
Claymore 11.3 gives me the best speed so far at ~785H/s using stock settings
xmrig-amd-v2.6.0-beta1 with --opencl-launch 896x4 gives ~710H/s
My cards are clocked at 1280/2000.
Any ideas?
Claymore 11.3 gives me the best speed so far at ~785H/s using stock settings
xmrig-amd-v2.6.0-beta1 with --opencl-launch 896x4 gives ~710H/s
My cards are clocked at 1280/2000.
Any ideas?
Try with --opencl-launch 896x8
I tried 896x4 and 1024x4, and the later one gives ~740H/s
I mentioned to try 896x8 not 896x4 (or was that a typo?)
Sorry, my bad. How many threads can you run per gpu?
April 11, 2018, 03:52:51 PM
Thanks for answering. I use SMOS and Cast-XMR is not currently supported.
Claymore 11.3 gives me the best speed so far at ~785H/s using stock settings
xmrig-amd-v2.6.0-beta1 with --opencl-launch 896x4 gives ~710H/s
My cards are clocked at 1280/2000.
Any ideas?
Claymore 11.3 gives me the best speed so far at ~785H/s using stock settings
xmrig-amd-v2.6.0-beta1 with --opencl-launch 896x4 gives ~710H/s
My cards are clocked at 1280/2000.
Any ideas?
Try with --opencl-launch 896x8
I tried 896x4 and 1024x4, and the later one gives ~740H/s
I mentioned to try 896x8 not 896x4 (or was that a typo?)
April 11, 2018, 02:51:24 PM
The settings on SRBminer:
Intensity: 60 (when above: crash).
For the afterburner settings: mem clock 1100 (above 1100: crash).
I don't know why the hash drops after 20 min using!
Intensity: 60 (when above: crash).
For the afterburner settings: mem clock 1100 (above 1100: crash).
I don't know why the hash drops after 20 min using!
April 11, 2018, 02:44:06 PM
Hey there!
Max hashrate with Srbminer per vega64 is 1500h/s (6rig gpu) for haven (cn heavy) wich i think is good.
The problem i have: after 15-20min the hashrate drops from 8500 to 6000, and i don't know why!
Any idea?
Thanks a lot !
Max hashrate with Srbminer per vega64 is 1500h/s (6rig gpu) for haven (cn heavy) wich i think is good.
The problem i have: after 15-20min the hashrate drops from 8500 to 6000, and i don't know why!
Any idea?
Thanks a lot !
April 11, 2018, 01:36:54 PM
Thanks for answering. I use SMOS and Cast-XMR is not currently supported.
Claymore 11.3 gives me the best speed so far at ~785H/s using stock settings
xmrig-amd-v2.6.0-beta1 with --opencl-launch 896x4 gives ~710H/s
My cards are clocked at 1280/2000.
Any ideas?
Claymore 11.3 gives me the best speed so far at ~785H/s using stock settings
xmrig-amd-v2.6.0-beta1 with --opencl-launch 896x4 gives ~710H/s
My cards are clocked at 1280/2000.
Any ideas?
Try with --opencl-launch 896x8
I tried 896x4 and 1024x4, and the later one gives ~740H/s
Another thing...
Same miner, (Claymore 11.3) same settings, same kind of cards:
System #1 - 8 cards, avg ~740 H/s
System #2 - 2 cards, avg ~929 H/s
What is bottlenecking system #1?
April 11, 2018, 01:33:15 PM
Thanks for answering. I use SMOS and Cast-XMR is not currently supported.
Claymore 11.3 gives me the best speed so far at ~785H/s using stock settings
xmrig-amd-v2.6.0-beta1 with --opencl-launch 896x4 gives ~710H/s
My cards are clocked at 1280/2000.
Any ideas?
Claymore 11.3 gives me the best speed so far at ~785H/s using stock settings
xmrig-amd-v2.6.0-beta1 with --opencl-launch 896x4 gives ~710H/s
My cards are clocked at 1280/2000.
Any ideas?
Try with --opencl-launch 896x8
April 11, 2018, 01:29:10 PM
Finally i got the command line for Intensity with XMRig-AMD
getting 750 H/s per card, but RX5xx can reach around 850-900 H/s
If you got reach 850 H/s+ with XMRig , share your config - command line! , thanks!
Code:
--opencl-platform 0 --opencl-devices 0,1,2,3,4,5 --opencl-launch 985x8 --opencl-affinity 0 -o stratum+tcp://[POOL.PORT] -u [WALLET] -p x --donate-level=1 --print-time=5
getting 750 H/s per card, but RX5xx can reach around 850-900 H/s
If you got reach 850 H/s+ with XMRig , share your config - command line! , thanks!
I don't use xmrig but try --opencl-launch 896x8.
Yeah, with XMRig i got 750 H/s per RX... but finally with Claymore 11.3 i am getting 860-870 H/s per card. thanks
Would you mind sharing your settings with Claymore 11.3? Im stuck at ~785H/s with my Rx570 (they do 29mh/s+ with eth)
Yes, i am getting 870-880 H/s with RX570, with Claymore 11.3 (SMOS) , in Windows, you can reach 900-1000 H/s with Cast-XMR.
Code:
-xpool stratum+tcp://[POOL:PORT] -pow7 1 -xwal [WALLET] -xpsw x
Thanks for answering. I use SMOS and Cast-XMR is not currently supported.
Claymore 11.3 gives me the best speed so far at ~785H/s using stock settings
xmrig-amd-v2.6.0-beta1 with --opencl-launch 896x4 gives ~710H/s
My cards are clocked at 1280/2000.
Any ideas?
April 11, 2018, 01:07:48 PM
Someone is having problems with XMR-STAK + Stellite?
I did modify in pools.txt, changed concurrency to "monero7" and pool/wallet. But I'm getting my IP banned from all pools bacause invalid shares. I'm forgetting something? The XMR Stak version is the last one posted here.
Mining with just SRBMiner is working like a charm.
I did modify in pools.txt, changed concurrency to "monero7" and pool/wallet. But I'm getting my IP banned from all pools bacause invalid shares. I'm forgetting something? The XMR Stak version is the last one posted here.
Mining with just SRBMiner is working like a charm.
change currency value to stellite in pools.txt
The original pools.txt doesnt have stellite in concurrency options. Nice tip!
April 11, 2018, 12:37:24 PM
Heavyarm thanks a lot for your answer.
The problem is That the software crash when i put more than 60 of intensity (on the line above the manual gpu config of the config file).
So i cant do it
The problem is That the software crash when i put more than 60 of intensity (on the line above the manual gpu config of the config file).
So i cant do it
Try the below,
Code:
{
/* Type can be : normal, normalv7, lite, litev7, heavy, ultraheavy */
"cryptonight_type" : "heavy",
/* Intensity 0-> auto intensity, or value from 1-300 */
"intensity" : 112,
/* To use 2 threads per card set double_threads to true */
"double_threads" : true,
/* Gpu target temperature, leave it on 0 if you don't want to use this option */
"target_temperature" : 0,
/* If you use a SSL/TLS encrypted pool set this to true*/
"pool_use_tls" : false,
/* Mining pool address WITHOUT the stratum+tcp:// or stratum+tls:// part */
"pool" : "POOL_ADDRESS:PORT",
/* Address of you wallet */
"wallet" : "WALLET_ADDR",
/* Password for your wallet, probably just x */
"password" : "x",
/* Location for devfee servers, to get better latency */
"location" : "europe",
/* Advanced settings for each GPU manually */
/* Put in devices that you want to use, if you for ex. don't want to use gpu 2, just don't insert it,like in this example */
/* Id starts from 0 , not from 1 !! */
/* To get a list of available devices with their id's, use --listdevices parameter */
/* This is just an example, edit it and remove comment lines !! */
/*"gpu_conf" :
[
{ "id" : 0, "intensity" : 0, "worksize" : 8, "threads" : 1},
{ "id" : 1, "intensity" : 20, "worksize" : 16, "threads" : 2},
{ "id" : 3, "intensity" : 30, "worksize" : 16, "threads" : 2},
{ "id" : 4, "intensity" : 0, "worksize" : 8, "threads" : 1},
]*/
}
/* Type can be : normal, normalv7, lite, litev7, heavy, ultraheavy */
"cryptonight_type" : "heavy",
/* Intensity 0-> auto intensity, or value from 1-300 */
"intensity" : 112,
/* To use 2 threads per card set double_threads to true */
"double_threads" : true,
/* Gpu target temperature, leave it on 0 if you don't want to use this option */
"target_temperature" : 0,
/* If you use a SSL/TLS encrypted pool set this to true*/
"pool_use_tls" : false,
/* Mining pool address WITHOUT the stratum+tcp:// or stratum+tls:// part */
"pool" : "POOL_ADDRESS:PORT",
/* Address of you wallet */
"wallet" : "WALLET_ADDR",
/* Password for your wallet, probably just x */
"password" : "x",
/* Location for devfee servers, to get better latency */
"location" : "europe",
/* Advanced settings for each GPU manually */
/* Put in devices that you want to use, if you for ex. don't want to use gpu 2, just don't insert it,like in this example */
/* Id starts from 0 , not from 1 !! */
/* To get a list of available devices with their id's, use --listdevices parameter */
/* This is just an example, edit it and remove comment lines !! */
/*"gpu_conf" :
[
{ "id" : 0, "intensity" : 0, "worksize" : 8, "threads" : 1},
{ "id" : 1, "intensity" : 20, "worksize" : 16, "threads" : 2},
{ "id" : 3, "intensity" : 30, "worksize" : 16, "threads" : 2},
{ "id" : 4, "intensity" : 0, "worksize" : 8, "threads" : 1},
]*/
}
April 11, 2018, 12:29:23 PM
Finally i got the command line for Intensity with XMRig-AMD
getting 750 H/s per card, but RX5xx can reach around 850-900 H/s
https://i.imgur.com/QQpPpZ4.png
If you got reach 850 H/s+ with XMRig , share your config - command line! , thanks!
Code:
--opencl-platform 0 --opencl-devices 0,1,2,3,4,5 --opencl-launch 985x8 --opencl-affinity 0 -o stratum+tcp://[POOL.PORT] -u [WALLET] -p x --donate-level=1 --print-time=5
getting 750 H/s per card, but RX5xx can reach around 850-900 H/s
https://i.imgur.com/QQpPpZ4.png
If you got reach 850 H/s+ with XMRig , share your config - command line! , thanks!
I don't use xmrig but try --opencl-launch 896x8.
Yeah, with XMRig i got 750 H/s per RX... but finally with Claymore 11.3 i am getting 860-870 H/s per card. thanks
Would you mind sharing your settings with Claymore 11.3? Im stuck at ~785H/s with my Rx570 (they do 29mh/s+ with eth)
Yes, i am getting 870-880 H/s with RX570, with Claymore 11.3 (SMOS) , in Windows, you can reach 900-1000 H/s with Cast-XMR.
Code:
-xpool stratum+tcp://[POOL:PORT] -pow7 1 -xwal [WALLET] -xpsw x
April 11, 2018, 09:50:38 AM
Heavyarm thanks a lot for your answer.
The problem is That the software crash when i put more than 60 of intensity (on the line above the manual gpu config of the config file).
So i cant do it
The problem is That the software crash when i put more than 60 of intensity (on the line above the manual gpu config of the config file).
So i cant do it
April 11, 2018, 09:17:14 AM
Finally i got the command line for Intensity with XMRig-AMD
getting 750 H/s per card, but RX5xx can reach around 850-900 H/s
If you got reach 850 H/s+ with XMRig , share your config - command line! , thanks!
Code:
--opencl-platform 0 --opencl-devices 0,1,2,3,4,5 --opencl-launch 985x8 --opencl-affinity 0 -o stratum+tcp://[POOL.PORT] -u [WALLET] -p x --donate-level=1 --print-time=5
getting 750 H/s per card, but RX5xx can reach around 850-900 H/s
If you got reach 850 H/s+ with XMRig , share your config - command line! , thanks!
I don't use xmrig but try --opencl-launch 896x8.
Yeah, with XMRig i got 750 H/s per RX... but finally with Claymore 11.3 i am getting 860-870 H/s per card. thanks
Would you mind sharing your settings with Claymore 11.3? Im stuck at ~785H/s with my Rx570 (they do 29mh/s+ with eth)
April 11, 2018, 09:00:47 AM
Someone is having problems with XMR-STAK + Stellite?
I did modify in pools.txt, changed concurrency to "monero7" and pool/wallet. But I'm getting my IP banned from all pools bacause invalid shares. I'm forgetting something? The XMR Stak version is the last one posted here.
Mining with just SRBMiner is working like a charm.
I did modify in pools.txt, changed concurrency to "monero7" and pool/wallet. But I'm getting my IP banned from all pools bacause invalid shares. I'm forgetting something? The XMR Stak version is the last one posted here.
Mining with just SRBMiner is working like a charm.
change currency value to stellite in pools.txt
April 11, 2018, 08:59:50 AM
Hello everyone!
Thanks to the dev for the great job.
I have some question about Haven mining (cn heavy).
I run a 6 gpu (Vega 64 8mb) rig with srbminer to mine haven.
It seems that my hashrate is not optimal comparing to others reporting 1500+ h/s using Vega 64 or 54 with xmr-stak.
I only get around 950h/s per gpu (max 1400 but drowning quickly)...
I also get some miner crash quite often.
I wonder if i do something wrong with the settings or if it is a miner/gpu limits...
The best hashrate i get comes with this settings.
-algo: heavy
-pool use ssl/tls: false
-target temperature: 0
-"intensity 55"
-i use cryptoknight pool (luckypool gave me the same result).
gpu config
-Intensity 150 for each gpu, double thread "true"
-Virtual memory on my computer 30000-60000
-On afterburner: coreclock 950, memory 1020
I get around 900-950 h/s per card with thoses settings (and was the best i could hit), wich seems to be low according to others Smiley
Does anyone have any idea of what i did wrong, or if it is srbminer limits?
Thanks a lot!
Thanks to the dev for the great job.
I have some question about Haven mining (cn heavy).
I run a 6 gpu (Vega 64 8mb) rig with srbminer to mine haven.
It seems that my hashrate is not optimal comparing to others reporting 1500+ h/s using Vega 64 or 54 with xmr-stak.
I only get around 950h/s per gpu (max 1400 but drowning quickly)...
I also get some miner crash quite often.
I wonder if i do something wrong with the settings or if it is a miner/gpu limits...
The best hashrate i get comes with this settings.
-algo: heavy
-pool use ssl/tls: false
-target temperature: 0
-"intensity 55"
-i use cryptoknight pool (luckypool gave me the same result).
gpu config
-Intensity 150 for each gpu, double thread "true"
-Virtual memory on my computer 30000-60000
-On afterburner: coreclock 950, memory 1020
I get around 900-950 h/s per card with thoses settings (and was the best i could hit), wich seems to be low according to others Smiley
Does anyone have any idea of what i did wrong, or if it is srbminer limits?
Thanks a lot!
Try
1400+ on core frequencies @900mV
Intensity 119, dual threads
April 11, 2018, 08:15:18 AM
Someone is having problems with XMR-STAK + Stellite?
I did modify in pools.txt, changed concurrency to "monero7" and pool/wallet. But I'm getting my IP banned from all pools bacause invalid shares. I'm forgetting something? The XMR Stak version is the last one posted here.
Mining with just SRBMiner is working like a charm.
I did modify in pools.txt, changed concurrency to "monero7" and pool/wallet. But I'm getting my IP banned from all pools bacause invalid shares. I'm forgetting something? The XMR Stak version is the last one posted here.
Mining with just SRBMiner is working like a charm.
April 11, 2018, 05:58:35 AM
Can someone post EthOS config file for mining SUMO?
April 11, 2018, 01:42:20 AM
Hello everyone!
Thanks to the dev for the great job.
I have some question about Haven mining (cn heavy).
I run a 6 gpu (Vega 64 8mb) rig with srbminer to mine haven.
It seems that my hashrate is not optimal comparing to others reporting 1500+ h/s using Vega 64 or 54 with xmr-stak.
I only get around 950h/s per gpu (max 1400 but drowning quickly)...
I also get some miner crash quite often.
I wonder if i do something wrong with the settings or if it is a miner/gpu limits...
The best hashrate i get comes with this settings.
-algo: heavy
-pool use ssl/tls: false
-target temperature: 0
-"intensity 55"
-i use cryptoknight pool (luckypool gave me the same result).
gpu config
-Intensity 150 for each gpu, double thread "true"
-Virtual memory on my computer 30000-60000
-On afterburner: coreclock 950, memory 1020
I get around 900-950 h/s per card with thoses settings (and was the best i could hit), wich seems to be low according to others Smiley
Does anyone have any idea of what i did wrong, or if it is srbminer limits?
Thanks a lot!
Check hashrate in XMR-STAK also, you need to try different intensity maybe.Thanks to the dev for the great job.
I have some question about Haven mining (cn heavy).
I run a 6 gpu (Vega 64 8mb) rig with srbminer to mine haven.
It seems that my hashrate is not optimal comparing to others reporting 1500+ h/s using Vega 64 or 54 with xmr-stak.
I only get around 950h/s per gpu (max 1400 but drowning quickly)...
I also get some miner crash quite often.
I wonder if i do something wrong with the settings or if it is a miner/gpu limits...
The best hashrate i get comes with this settings.
-algo: heavy
-pool use ssl/tls: false
-target temperature: 0
-"intensity 55"
-i use cryptoknight pool (luckypool gave me the same result).
gpu config
-Intensity 150 for each gpu, double thread "true"
-Virtual memory on my computer 30000-60000
-On afterburner: coreclock 950, memory 1020
I get around 900-950 h/s per card with thoses settings (and was the best i could hit), wich seems to be low according to others Smiley
Does anyone have any idea of what i did wrong, or if it is srbminer limits?
Thanks a lot!
This is latest working version for Haven https://github.com/IndeedMiners/xmr-aeon-stak/releases
Jump to: