Topic: [GUIDE][TUTORIAL][XMR,ETH]How To Mod Bios RX470/570/480/580 VEGA Mining 💰⛏ - page 32. (Read 220957 times)

Now I remember what the difference was.
When I reached 13.5MHz at 1020-GPU and 1150-MEM, it was after I increased the memory value gradually through MSI Afterburner during the mining of the video card. And once I enter the high values and then launching Claymore’s Ethereum miner, at the rows

Setting DAG epoch #153 for GPU0
Create GPU buffer for GPU0

the video card crashes.

When I install
Blockchain Drivers August Windows 7/10
Or
FIX for DAG EPOCH hashrates drop BETA drivers
Through device manager I receive the same speed.
Can I install both Blockchain Drivers August Windows 7/10 and FIX for DAG EPOCH hashrates drop BETA drivers?

And which is the highest possible speed for this card:
Radeon RX 560 Pulse MINING Edition 4096MB GDDR5 /one DVI port/ with Hynix memory?
Does anybody know?

Thank you!

Probably because your memory strap is too aggressive

hello guys
i have MSI Gaming X RX 570 4 GB (Elpida) and i get 22 mh in stock bios nad with mod bios polaris 25 and with overclock memory get 28
but i cant increase my memory clock over 1950 i put core clock on 1150 on other dont touch
some user put memory 2100 and core clock 1200 and get 29 or 30 with the same vga
why i cant increas memory clock over 1950?
my driver is blockchain

I mean GUIDES or TUTORIALS how to setup AMD cards.

I'm just wondering how this Saphire rx560 work once and when I restart the computer, videocard crashed with absolutely the same hardware and tuning ...
I use MSI Afterburner, but I want to put the settings in Bios and use the card under Linux.

What directions?

Are you using another OC tool?

Well when i set the lower voltage, it works for 15 sec.. and then go back to normal.. but the numbers in the tool remains the same (mV)

Hello Mattthev,

I have been professionally engaged in computers for 10 years. I assemble and sell them and I have revived a lot of laptops through a reball.
Before 3-4 years ago, I started mining with 3 HD7950 cards. With the few of them I started making arbitrations. But everything stole exchanges – MTGOX, Cryptsy and one chinese exchange.
Now, if I had what I won then, I would have over $ 1500K.

So believe me, I have an idea of how to put drivers and how to deal with crypto-coins, but the directions are very different. That is, it just comes a moment when you just hit one place.

If you don't know how to install drivers you shouldn't do GPU mining...

Thanks for the reply!
Can you give me somewhere for a guide to install these drivers? I have really gone wrong with these various directions. Everywhere is something different.
Where is this setting set:

need to switch to Compute for all GPUs in Radeon settings?

I'm also interested in linux, and there can I put this?

Thank you!

I'm mining with almost 1 week uptime with RX580 and the WHQL 17.11.1 driver on windows 10 fall creators update.
151MH eth + 5120mh DCR @ 1240mhz 912mv
It gives me the best performance and stability on my 5x rx580 system. Don't forget to set the gpu's to "compute" on the amd control panel.
Give those a try! Always run display driver uninstaller before installing a newer driver.

Drivers

For best ETH performance need to use mining drivers (Blockchain) for Windows 7/10 and Linux
Blockchain Drivers August Windows 7/10
FIX for DAG EPOCH hashrates drop BETA drivers
Blockchain Drivers for Linux
Radeon Software Crimson Edition ReLive Graphics Driver 17.10.3 - New gaming and mining drivers in one, need to switch to Compute for all GPUs in Radeon settings.


Guys for my rx 480 what are the best driver to install?

Hello to every one!

I have two problems with Radeon RX 560 Pulse MINING Edition 4096MB GDDR5 /one DVI port/ with Hynix memory. Original BIOS https://1drv.ms/f/s!Aj7gqvseJoQigw6_MDDtpQequ8k_

1st : when the memory frequency increase reaches a maximum value before crushing, then the video card crashes when the values are recorded permanently in the bios.
2nd : under the Xubuntu 16.04 LTS/64bit with AMDGPU-Pro Beta Mining Driver for Linux and under the same pc with the same hardware and settings in Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v10.1, I get a slower speed of about 10%!, from 12 to 11 MHz

On the first point I do the following:
I'm replacing mem.Timings Strap 1750 to 2000 and 2250. If I do from 1500 I get artifacts very soon at a slower speed. I also change MEM max frequency from 2000 to 2200.
I set GPU freq. at 1020 and increase MEM freq. with step of 10.
So I got a maximum speed of 13.5 at GPU-1020 and MEM 2150. I said, ok, this is the maximum speed and I recorded the values permanently in the bios. I have not changed another as voltage or power.
But the video card when it starts digging, right at the start, immediately crashes. Color screen. And very difficult to reach 13 Mhz at 1020 and 2100. MEM mast be at 1950 around and speed 12.5 to start with no problem.
Why once the videokard works without a problem on one values, after the restart do not want it? on the same computer!

On the second point I do the following:
I just change the same type of hard drive with Linux and I get at a slow speed at 11 MHz. Settings of videocard are in the Bios.
At windows 10/64bit with Win10-64Bit-Crimson-ReLive-Beta-Blockchain-Workloads-Aug23 I get 12 MHz...

Thanks in advise!

I don't have VEGA :/ Have you tried newest AB 4.4.0 stable?
Try ask here: https://bitcointalksearch.org/topic/any-word-on-amd-vega-hash-rates-2002025

With Vegas, what can you do if you are using OverdriveN and HWinfo64 still reports a higher voltage than was set?

That's better choice, check voltages in HWinfo64 and GPU-Z if they are applied well.

I couldnt unvervolt the new rx 5xx cards with AB aswell. The only things that allowed me to do so was the OverdriveN tool.. And from now on im only using this

Finally got it working. All my problems were because of the Pitcairn card being in the system. When I use the radeon driver then it won't mine at all, because it says DRM version is 2.50, even though I'm only trying to mine on the 570. When I use the amdgpu driver for the 270 I can mine...but the dag fix doesn't work.

Now after taking that card out of the system I'm getting 28.4MH/s @ 1140/2030 on a 4GB AJR card using Claymore. Haven't tested the same settings in Windows yet but it looks like it should be on par. Now I just gotta try different miners to see what's fastest and optimize the BIOS for each individual card, but the path to Linux rigs is clear now.


Are you using the latest stable afterburner 4.4.0? It should work with the latest drivers and allow up to -200mV. Does for me anyway. Make sure you apply the BIOS signature check patch if you're running a modified BIOS (which you should be doing unless you just don't want a free +7 or more MH/s).

Undervolting the memory controller is not really worth doing. Keep it between 950 and 1000 for stability. You can just set that in the BIOS and forget it.

yep it was 1 card had to many errors i replaced it also lowered abit mem and so far so good 180 hashrate without drop works like charm memclock was 2150 but had to lower since crashed my drivers now with 2140 works like charm... 470 8GB Hynix best thing ever !!

you can just try one, and then the other, and see the difference for yourself