[GUIDE][TUTORIAL][XMR,ETH]How To Mod Bios RX470/570/480/580 VEGA Mining 💰⛏ - page 35.

Branko

sr. member

Activity: 2632

Merit: 328

Quote from: ?? on ??

Quote from: bardacuda on November 09, 2017, 08:23:02 AM

Actually he and greatauror were talking about a specific samsung IC. Although he is no doubt also using a custom kernel whereas everyone else is posting their hashrate reported by claymore in win, so his increases don't necessarily all come from optimized timings.

Like I say I have a few Elpidas and none of mine will even do more than 2020. The lowest 2 only do 1960/1970.

I do benchmarks using Claymore's linux miner for this very reason!

So should I try harder or be happy with 29.7 on elpida?
Card is pretty hot because its in ordinary PC, that probably steals
some hashing power

Branko

sr. member

Activity: 2632

Merit: 328

Quote from: bardacuda on November 09, 2017, 08:23:02 AM

Actually he and greatauror were talking about a specific samsung IC. Although he is no doubt also using a custom kernel whereas everyone else is posting their hashrate reported by claymore in win, so his increases don't necessarily all come from optimized timings.

Like I say I have a few Elpidas and none of mine will even do more than 2020. The lowest 2 only do 1960/1970.

My bad I guess, replied to wrong post a few posts ago

bardacuda

sr. member

Activity: 430

Merit: 254

Actually he and greatauror were talking about a specific samsung IC. Although he is no doubt also using a custom kernel whereas everyone else is posting their hashrate reported by claymore in win, so his increases don't necessarily all come from optimized timings.

Like I say I have a few Elpidas and none of mine will even do more than 2020. The lowest 2 only do 1960/1970.

Branko

sr. member

Activity: 2632

Merit: 328

Quote from: ?? on ??

Quote from: Branko on November 09, 2017, 02:33:56 AM

Quote from: ?? on ??

Really? You can't hit 30 with THAT? It's not only the most performant of the ones I've worked on, it's also the one most tolerant to whack settings... What clocks you at, and what timing set?

I'm at 2030MHz, and even default straps, with no changes at all, won't go over 2050 without errors in hwinfo

After bad experience with Hynix version of Gigabyte RX560, it wouldn't surprise me if I'd remove cooler and find
6GHz instead 7GHz chips there...and your lucky 31+ MH/s maybe even have 8GHz chips, so don't judge Cheesy

You think I need luck to get 31MH/s+? With 8Gbps Samsung, I can clear 34MH/s.

We were talking about Elpida, though...I managed to get 16.3MH/s on RX560 with 7GHz micron, I guess thats close to your
34 on 8GHz Samsung

(relatively speaking, considering is half RX580 in everything)

bardacuda

sr. member

Activity: 430

Merit: 254

Try the ubermix straps. 1900 seems awfully low for samsung.

stef_stef

full member

Activity: 144

Merit: 100

I am trying to get a stable hash rate form an rx 470 nitro+ mining edition with samsung memory.

I have 8 cards running with the same bios (1750 straps copied to 2000), but one is getting waay to many incorrect shares. The cards are running at 1900 mem and 1050 core I have tried different frequencies, but could not find a stable one for that one card.

Any tips on what to try next? Should I maybe try a different bios?

Thanks

bardacuda

sr. member

Activity: 430

Merit: 254

Quote from: m1dz0 on November 08, 2017, 05:34:54 PM

Quote from: ?? on ??

Quote from: m1dz0 on November 08, 2017, 04:09:12 PM

Anyone have modded 'edw4032babg' ? (570 4gb elpida)

It's hella common - I've done it several times, but I've not focused extremely hard on it cause it's not one I've got a lot of.

Most of cheap rx 570's come with elpida :-/

Out of 9 500-series cards, 5 of mine have that. You could say I went for cheap ones, but I bought them all no earlier than late June, so none of them were that cheap Tongue

ronnylov

member

Activity: 276

Merit: 13

The guides are made for Windows. Can this be done in Linux?

I just bought an used XFX RX 460 2GB single fan and if I mod the bios (maybe using a windows machine) will it work in Linux? I see there is a mod of windows driver to bypass bios signature check but there is mo mod required for Linux? It also seems possible to flash it with a RX 560 bios to unlock shaders but maybe not Worth it? I am mining Intense (cryptonight) so mods for Monero should be useful to me.

Branko

sr. member

Activity: 2632

Merit: 328

Quote from: ?? on ??

Really? You can't hit 30 with THAT? It's not only the most performant of the ones I've worked on, it's also the one most tolerant to whack settings... What clocks you at, and what timing set?

I'm at 2030MHz, and even default straps, with no changes at all, won't go over 2050 without errors in hwinfo

After bad experience with Hynix version of Gigabyte RX560, it wouldn't surprise me if I'd remove cooler and find
6GHz instead 7GHz chips there...and your lucky 31+ MH/s maybe even have 8GHz chips, so don't judge Cheesy

greatauror28

full member

Activity: 181

Merit: 101

Ethereum Miner

Quote from: ?? on ??

Quote from: greatauror28 on November 08, 2017, 05:51:41 PM

Quote from: ?? on ??

Quote from: greatauror28 on November 08, 2017, 12:33:58 PM

Quote from: ?? on ??

Quote from: Branko on November 08, 2017, 03:51:11 AM

Quote from: ?? on ??

Quote from: Branko on November 08, 2017, 03:36:44 AM

Quote from: Bitock on November 08, 2017, 03:34:52 AM

How can I reworke the timings? Where can I read about it?

I just found out Cheesy

https://www.jedec.org/system/files/docs/JESD212C.pdf

(beware, its 158 pages full of highly technical info)

Nope - this won't help you rework the timings; my owner & I released that part AGES ago. OhGodADecode.

You need the specification because you need to look at the format of the mode registers, and there is where you'll find what you wanted to know.

You mean

?

You're in the right chapter. Now - which one looks likely to be the format for the one you want?

Hey wolfie, can you throw out a 2000 strap for a samsung that easily clears 30 Mh?

I have a strap found in the GDDR5 timings thread but could only go 29.9 and that's the card with the highest quality. Others only do 29.5 or 29.6.

If you would be so kind Wink

No, because you've not specified WHICH Samsung.

Ooops, sorry Grin

Here - K4G80325FB

Really? You can't hit 30 with THAT? It's not only the most performant of the ones I've worked on, it's also the one most tolerant to whack settings... What clocks you at, and what timing set?

I have the clocks at 1160/~~2050~~2100/900 and the strap i'm using at 2000 is:

Code:

777000000000000022CC1C00106A5D4DD0571016B90D060C0060070014051420FA8900A0030000001011333DC0303A17

greatauror28

full member

Activity: 181

Merit: 101

Ethereum Miner

Quote from: ?? on ??

Quote from: greatauror28 on November 08, 2017, 12:33:58 PM

Quote from: ?? on ??

Quote from: Branko on November 08, 2017, 03:51:11 AM

Quote from: ?? on ??

Quote from: Branko on November 08, 2017, 03:36:44 AM

Quote from: Bitock on November 08, 2017, 03:34:52 AM

How can I reworke the timings? Where can I read about it?

I just found out Cheesy

https://www.jedec.org/system/files/docs/JESD212C.pdf

(beware, its 158 pages full of highly technical info)

Nope - this won't help you rework the timings; my owner & I released that part AGES ago. OhGodADecode.

You need the specification because you need to look at the format of the mode registers, and there is where you'll find what you wanted to know.

You mean

?

You're in the right chapter. Now - which one looks likely to be the format for the one you want?

Hey wolfie, can you throw out a 2000 strap for a samsung that easily clears 30 Mh?

I have a strap found in the GDDR5 timings thread but could only go 29.9 and that's the card with the highest quality. Others only do 29.5 or 29.6.

If you would be so kind Wink

No, because you've not specified WHICH Samsung.

Ooops, sorry Grin

Here - K4G80325FB

Branko

sr. member

Activity: 2632

Merit: 328

Quote from: m1dz0 on November 08, 2017, 05:34:54 PM

Quote from: ?? on ??

Quote from: m1dz0 on November 08, 2017, 04:09:12 PM

Anyone have modded 'edw4032babg' ? (570 4gb elpida)

It's hella common - I've done it several times, but I've not focused extremely hard on it cause it's not one I've got a lot of.

Most of cheap rx 570's come with elpida :-/

My not so cheap Gigabyte Aorus RX580 came with Elpida too...29.7MH/s

m1dz0

newbie

Activity: 15

Merit: 0

Quote from: ?? on ??

Quote from: m1dz0 on November 08, 2017, 04:09:12 PM

Anyone have modded 'edw4032babg' ? (570 4gb elpida)

It's hella common - I've done it several times, but I've not focused extremely hard on it cause it's not one I've got a lot of.

Most of cheap rx 570's come with elpida :-/

m1dz0

newbie

Activity: 15

Merit: 0

Anyone have modded 'edw4032babg' ? (570 4gb elpida)

bardacuda

sr. member

Activity: 430

Merit: 254

Quote from: clems on November 05, 2017, 05:34:27 AM

Hello,

Thanks so much man for this Tutorial !!!!!!!!!

My rig base on AMD NITRO+ RX 580 8G Hynix + Ubuntu 16.04 Server with AMD beta blockchain drivers + Claymore:

Each GPU for "Estash"
30.7 Mh/s
Temp=62C
Fan=36%
120W ( 0.017$ KWh so I don't really work on that ^^)

On Windows the Hash is better 31.4Mh/s but Linux is more stable and...I don't want to work on Windows anyway.

Strange thing is when I start Dual-Mining my hashrate increase to 30.9 Mh/s and 970 for DRE but I will not use Dual mining !! Dual Mining is taking 60W more / Lot more noisy and Fan start to go high...

Someone have the same increasing Hashrate when dual mining?

When you say beta blockchain drivers do you mean amdgpu-pro 17.40? I'm trying to figure out which kernel/firmware combo you need to run on linux with the dag fix but I keep breaking my install lol :p

greatauror28

full member

Activity: 181

Merit: 101

Ethereum Miner

Quote from: ?? on ??

Quote from: Branko on November 08, 2017, 03:51:11 AM

Quote from: ?? on ??

Quote from: Branko on November 08, 2017, 03:36:44 AM

Quote from: Bitock on November 08, 2017, 03:34:52 AM

How can I reworke the timings? Where can I read about it?

I just found out Cheesy

https://www.jedec.org/system/files/docs/JESD212C.pdf

(beware, its 158 pages full of highly technical info)

Nope - this won't help you rework the timings; my owner & I released that part AGES ago. OhGodADecode.

You need the specification because you need to look at the format of the mode registers, and there is where you'll find what you wanted to know.

You mean

?

You're in the right chapter. Now - which one looks likely to be the format for the one you want?

Hey wolfie, can you throw out a 2000 strap for a samsung that easily clears 30 Mh?

I have a strap found in the GDDR5 timings thread but could only go 29.9 and that's the card with the highest quality. Others only do 29.5 or 29.6.

If you would be so kind Wink

Branko

sr. member

Activity: 2632

Merit: 328

Quote from: ?? on ??

Quote from: Branko on November 08, 2017, 03:36:44 AM

Quote from: Bitock on November 08, 2017, 03:34:52 AM

How can I reworke the timings? Where can I read about it?

I just found out Cheesy

https://www.jedec.org/system/files/docs/JESD212C.pdf

(beware, its 158 pages full of highly technical info)

Nope - this won't help you rework the timings; my owner & I released that part AGES ago. OhGodADecode.

You need the specification because you need to look at the format of the mode registers, and there is where you'll find what you wanted to know.

You mean

?

Branko

sr. member

Activity: 2632

Merit: 328

Quote from: Bitock on November 08, 2017, 03:34:52 AM

How can I reworke the timings? Where can I read about it?

I just found out Cheesy

https://www.jedec.org/system/files/docs/JESD212C.pdf

(beware, its 158 pages full of highly technical info)

Bitock

full member

Activity: 213

Merit: 100

Quote from: ?? on ??

Quote from: Bitock on November 08, 2017, 03:04:03 AM

Quote from: ?? on ??

Quote from: Bitock on November 08, 2017, 02:45:47 AM

Quote from: ?? on ??

Quote from: Bitock on November 08, 2017, 01:43:24 AM

Quote from: greatauror28 on November 07, 2017, 11:10:33 PM

Quote from: Bitock on November 07, 2017, 04:55:05 PM

I have msi rx580 8gb with hynix memory. I took timings from here http://indeedminers.czechian.net/timings.html and wrote its to 2:1750, 2:2000, 2:2250. First I tried the first timing, after second. When I run miner my system crashed. What am I doing wrong?

I’m sure his Asic quality is higher than your cards hence the crash.

I suggest doing your own trial-and-error until you find your card’s sweet spot.

How can I get about 30mh/s from my card? I get ~27,7mh/s from original bios and writed timings from 2:1750 to 2:2000, 2:2250 without memory errors.
I read a lot of forums and find topics where suggest mod_bios for my card but only with a lot of memory errors.
Help, please!

I cleared 31MH/s stable, and 32MH/s was unstable at the time... but since I only have like one or two cards with that memory, I said fuck it; it's not worth my time to improve it to 32MH/s+, as it can be a *really* picky bitch.

Cool.
Are you write strap 2:2000, 2:2250 or other yet?
Timings take from 2:1750?

I did 2000 & 2250 - and fuck no I didn't use the shitty timings from the 1750 range, lol.

If I understand you right you write timings from 2:2000 to 2:2250, strap 1:2000 and 1:2250 you left unchanged?

No, I completely reworked the timings myself - not basing them on any that were in the VBIOS before. Then I applied those to both 2000 & 2250.

How can I reworke the timings? Where can I read about it?

Bitock

full member

Activity: 213

Merit: 100

Quote from: ?? on ??

Quote from: Bitock on November 08, 2017, 02:45:47 AM

Quote from: ?? on ??

Quote from: Bitock on November 08, 2017, 01:43:24 AM

Quote from: greatauror28 on November 07, 2017, 11:10:33 PM

Quote from: Bitock on November 07, 2017, 04:55:05 PM

I have msi rx580 8gb with hynix memory. I took timings from here http://indeedminers.czechian.net/timings.html and wrote its to 2:1750, 2:2000, 2:2250. First I tried the first timing, after second. When I run miner my system crashed. What am I doing wrong?

I’m sure his Asic quality is higher than your cards hence the crash.

I suggest doing your own trial-and-error until you find your card’s sweet spot.

How can I get about 30mh/s from my card? I get ~27,7mh/s from original bios and writed timings from 2:1750 to 2:2000, 2:2250 without memory errors.
I read a lot of forums and find topics where suggest mod_bios for my card but only with a lot of memory errors.
Help, please!

I cleared 31MH/s stable, and 32MH/s was unstable at the time... but since I only have like one or two cards with that memory, I said fuck it; it's not worth my time to improve it to 32MH/s+, as it can be a *really* picky bitch.

Cool.
Are you write strap 2:2000, 2:2250 or other yet?
Timings take from 2:1750?

I did 2000 & 2250 - and fuck no I didn't use the shitty timings from the 1750 range, lol.

If I understand you right you write timings from 2:2000 to 2:2250, strap 1:2000 and 1:2250 you left unchanged?

Topic: [GUIDE][TUTORIAL][XMR,ETH]How To Mod Bios RX470/570/480/580 VEGA Mining 💰⛏ - page 35. (Read 220957 times)