Hi Mattthev,
it seems that you have magician hands when it comes to tune the gpu bios. I am interested in your service.
I opened this topic yesterday at bitcointalk https://bitcointalksearch.org/topic/6-x-gigabyte-gaming-rx580-8gb-hynix-135-mhs-only-225-each-2013941
There are some screenshots and the origal bios.rom file.
The GPU is Gigabyte Gaming RX580 8GB Hynix with only 22.5 MH/S
Please take a look and let me know how much you can tune the MH/S up and how much you can tune the watt down.
Thank you!
Topic: [GUIDE][TUTORIAL][XMR,ETH]How To Mod Bios RX470/570/480/580 VEGA Mining 💰⛏ - page 48. (Read 220666 times)
July 12, 2017, 12:09:47 PM
July 09, 2017, 08:56:53 AM
Hi Matthew, what would you charge to mod my bios file? Should I pm you?
Yep, or better write to e-mail. July 09, 2017, 04:16:51 AM
I have the mining version of rx 470 (https://www.newegg.com/Product/Product.aspx?Item=N82E16814202292) and I'm new messing with the bios and flashing GPU's - is it safe to follow these instructions and use UberMix v3.1, or should I wait for more information to come out?
Yes.I was doing bios for this card for one of my client.
https://i.imgur.com/16g4W6Z.jpg
Hi Matthew, what would you charge to mod my bios file? Should I pm you?
July 09, 2017, 03:55:33 AM
I have the mining version of rx 470 (https://www.newegg.com/Product/Product.aspx?Item=N82E16814202292) and I'm new messing with the bios and flashing GPU's - is it safe to follow these instructions and use UberMix v3.1, or should I wait for more information to come out?
Yes.I was doing bios for this card for one of my client.
July 09, 2017, 12:29:56 AM
I have the mining version of rx 470 (https://www.newegg.com/Product/Product.aspx?Item=N82E16814202292) and I'm new messing with the bios and flashing GPU's - is it safe to follow these instructions and use UberMix v3.1, or should I wait for more information to come out?
July 08, 2017, 04:57:58 PM
What about RX 560?
It's same. SRB is working good with RX 460/560.I'm wondering too about sapphire nitro 470 oc 4gb
I know you just wondering 
But what are you asking for? RX 470 is even in my benchmark.I know...I should probably write that like "what about rx 560, did anyone found/made good straps for Hynix/Micron?"
July 08, 2017, 12:27:40 PM
What about RX 560?
It's same. SRB is working good with RX 460/560.I'm wondering too about sapphire nitro 470 oc 4gb
I know you just wondering But what are you asking for? RX 470 is even in my benchmark. July 08, 2017, 10:54:31 AM
What about RX 560?
I'm wondering too about sapphire nitro 470 oc 4gb
July 08, 2017, 10:50:41 AM
What about RX 560?
July 06, 2017, 01:06:40 PM
I want to share my MODS for RX 480 Armor OC 4G (4GB).
22MH/S Stock
27MH/S Modded
29.3MH/S Tuned with afterburner (-50mv, core 1140Mhz, mem 2130Mhz)
There are Mods and Stocks for Samsung and for Hynix memory types.
https://drive.google.com/drive/folders/0B2ieRGP3Yw47THROekRBRkpZdUE?usp=sharing
P.D: Dont forget to monit your GPUs temps, dont be higher than 75°, i recommend to use a manual fan speed from afterburner (start afterburner with the system and keep it open).
So you just took 1500MHz strap and copy it to higher clocks? That's what you get from Anoraks, he at least lower voltages.22MH/S Stock
27MH/S Modded
29.3MH/S Tuned with afterburner (-50mv, core 1140Mhz, mem 2130Mhz)
There are Mods and Stocks for Samsung and for Hynix memory types.
https://drive.google.com/drive/folders/0B2ieRGP3Yw47THROekRBRkpZdUE?usp=sharing
P.D: Dont forget to monit your GPUs temps, dont be higher than 75°, i recommend to use a manual fan speed from afterburner (start afterburner with the system and keep it open).
Copying 1500, 1650, 1750MHz straps isn't good way!. But if you guys really want it at least take the Anoraks.
July 06, 2017, 08:57:09 AM
I also have a Asus Strix RX 580. My hashrate is about 27,5 now (claymore dual mining)
I tried the Uber-mix settings (extreme and the less extreme) but both crash my PC.
I only copied 1750 strap to the 2000 strap and overclock memory with 50 mhz. More makes it instable (reboots etc).
Would love to get a bit higher has rate. Weird that Uber-mix settings don't work at all.
Try Uber-mix 3.2 I tried the Uber-mix settings (extreme and the less extreme) but both crash my PC.
I only copied 1750 strap to the 2000 strap and overclock memory with 50 mhz. More makes it instable (reboots etc).
Would love to get a bit higher has rate. Weird that Uber-mix settings don't work at all.
July 06, 2017, 06:28:08 AM
I also have a Asus Strix RX 580. My hashrate is about 27,5 now (claymore dual mining)
I tried the Uber-mix settings (extreme and the less extreme) but both crash my PC.
I only copied 1750 strap to the 2000 strap and overclock memory with 50 mhz. More makes it instable (reboots etc).
Would love to get a bit higher has rate. Weird that Uber-mix settings don't work at all.
I tried the Uber-mix settings (extreme and the less extreme) but both crash my PC.
I only copied 1750 strap to the 2000 strap and overclock memory with 50 mhz. More makes it instable (reboots etc).
Would love to get a bit higher has rate. Weird that Uber-mix settings don't work at all.
July 05, 2017, 11:08:08 PM
Thought it'd be nice to share here.
Asus Rx580 Dual OC 8GB Samsung
1. out-of-box 24.5 Mh/s 140w
2. copied 1750 to 2000 27.5Mh/s 140w
3. custom strap 1260/2050/-100mV/28.4 Mh/s 119w constant 12+hrs
Weird that the Uber mix timings didn't work in any way for me.
P.S. I don't see any violations here (same as my other post) so I guess this won't get deleted?
Asus Rx580 Dual OC 8GB Samsung
1. out-of-box 24.5 Mh/s 140w
2. copied 1750 to 2000 27.5Mh/s 140w
3. custom strap 1260/2050/-100mV/28.4 Mh/s 119w constant 12+hrs
Weird that the Uber mix timings didn't work in any way for me.
P.S. I don't see any violations here (same as my other post) so I guess this won't get deleted?
same with me
highest hashrate on my asus strix rx 580 is only 28 mh/s July 05, 2017, 01:57:16 PM
Thought it'd be nice to share here.
Asus Rx580 Dual OC 8GB Samsung
1. out-of-box 24.5 Mh/s 140w
2. copied 1750 to 2000 27.5Mh/s 140w
3. custom strap 1260/2050/-100mV/28.4 Mh/s 119w constant 12+hrs
Weird that the Uber mix timings didn't work in any way for me.
P.S. I don't see any violations here (same as my other post) so I guess this won't get deleted?
28MH/s for RX 580 with Samsung is pretty low, Uber-mix would give you much more.Asus Rx580 Dual OC 8GB Samsung
1. out-of-box 24.5 Mh/s 140w
2. copied 1750 to 2000 27.5Mh/s 140w
3. custom strap 1260/2050/-100mV/28.4 Mh/s 119w constant 12+hrs
Weird that the Uber mix timings didn't work in any way for me.
P.S. I don't see any violations here (same as my other post) so I guess this won't get deleted?
Why would anybody delete your post?
July 05, 2017, 11:02:37 AM
Thought it'd be nice to share here.
Asus Rx580 Dual OC 8GB Samsung
1. out-of-box 24.5 Mh/s 140w
2. copied 1750 to 2000 27.5Mh/s 140w
3. custom strap 1260/2050/-100mV/28.4 Mh/s 119w constant 12+hrs
Weird that the Uber mix timings didn't work in any way for me.
P.S. I don't see any violations here (same as my other post) so I guess this won't get deleted?
Asus Rx580 Dual OC 8GB Samsung
1. out-of-box 24.5 Mh/s 140w
2. copied 1750 to 2000 27.5Mh/s 140w
3. custom strap 1260/2050/-100mV/28.4 Mh/s 119w constant 12+hrs
Weird that the Uber mix timings didn't work in any way for me.
P.S. I don't see any violations here (same as my other post) so I guess this won't get deleted?
July 05, 2017, 08:29:05 AM
Hi Mattthew:
Great guide, thx very much, one question, I have already pasted the uber mix on the 1750 and 2000 straps, I have an Asus ROG Strix RX580 O8G with samsung memory, the problem is I can not overclock the memory over 2050 MHz, it hangs my pc, it happens on Claymore, 3DMark and StarCraft 2.
I'm using in AB:
Core Voltage -96mV
CC 1360MHz and 1160MHz (Claymore)
MC 2050MHz
Should I mod the voltages in the bios for it to work fine?, if that's the case I don't get it yet, how must I do it?, for the Memory Voltage seems easy, Core Voltages not so much.
Thx very much.
Carlos
You can try Uber-MIx 3.2, but 2050MHz is good. Not every card can do 2100MHz and more with Uber-mix 3.1. Some of them can't even run 2000MHz.Great guide, thx very much, one question, I have already pasted the uber mix on the 1750 and 2000 straps, I have an Asus ROG Strix RX580 O8G with samsung memory, the problem is I can not overclock the memory over 2050 MHz, it hangs my pc, it happens on Claymore, 3DMark and StarCraft 2.
I'm using in AB:
Core Voltage -96mV
CC 1360MHz and 1160MHz (Claymore)
MC 2050MHz
Should I mod the voltages in the bios for it to work fine?, if that's the case I don't get it yet, how must I do it?, for the Memory Voltage seems easy, Core Voltages not so much.
Thx very much.
Carlos
OK, I reach the same Hashrate than pasting the 1750 strap to the 2000 strap, in that case I can reach 2100 MHz, with 2100 MHz with Uber-mix I get a better Hashrate but its not stable.
How can I get 900 mV in the Core Clock?, its not possible with Afterburner.
Thx again,
Carlos
Follow this to unlock the under volt for afterburner. You will be able to set it to 900 mv after this. https://linustechtips.com/main/topic/89360-cant-adjust-gpu-voltage-msi-afterburner/
Thank you very much. I have modified all the settings in AB, unlocked Voltage control, extended official OC, unlocked unofficial, etc. still the limit is -100 (real -96), do you mean the post about modifiying the Registry?, that is different to the settings in AB?.
July 04, 2017, 04:04:22 PM
thankx guys, could rise my hashrate +20% for my
RX580 Pulse 4GB Hynix
RX580 Pulse 4GB Hynix
July 04, 2017, 12:53:50 PM
Hi Mattthew:
Great guide, thx very much, one question, I have already pasted the uber mix on the 1750 and 2000 straps, I have an Asus ROG Strix RX580 O8G with samsung memory, the problem is I can not overclock the memory over 2050 MHz, it hangs my pc, it happens on Claymore, 3DMark and StarCraft 2.
I'm using in AB:
Core Voltage -96mV
CC 1360MHz and 1160MHz (Claymore)
MC 2050MHz
Should I mod the voltages in the bios for it to work fine?, if that's the case I don't get it yet, how must I do it?, for the Memory Voltage seems easy, Core Voltages not so much.
Thx very much.
Carlos
You can try Uber-MIx 3.2, but 2050MHz is good. Not every card can do 2100MHz and more with Uber-mix 3.1. Some of them can't even run 2000MHz.Great guide, thx very much, one question, I have already pasted the uber mix on the 1750 and 2000 straps, I have an Asus ROG Strix RX580 O8G with samsung memory, the problem is I can not overclock the memory over 2050 MHz, it hangs my pc, it happens on Claymore, 3DMark and StarCraft 2.
I'm using in AB:
Core Voltage -96mV
CC 1360MHz and 1160MHz (Claymore)
MC 2050MHz
Should I mod the voltages in the bios for it to work fine?, if that's the case I don't get it yet, how must I do it?, for the Memory Voltage seems easy, Core Voltages not so much.
Thx very much.
Carlos
OK, I reach the same Hashrate than pasting the 1750 strap to the 2000 strap, in that case I can reach 2100 MHz, with 2100 MHz with Uber-mix I get a better Hashrate but its not stable.
How can I get 900 mV in the Core Clock?, its not possible with Afterburner.
Thx again,
Carlos
Follow this to unlock the under volt for afterburner. You will be able to set it to 900 mv after this. https://linustechtips.com/main/topic/89360-cant-adjust-gpu-voltage-msi-afterburner/
Thank you very much. I have modified all the settings in AB, unlocked Voltage control, extended official OC, unlocked unofficial, etc. still the limit is -100 (real -96), do you mean the post about modifiying the Registry?, that is different to the settings in AB?.
July 04, 2017, 12:12:11 PM
Hi Mattthew:
Great guide, thx very much, one question, I have already pasted the uber mix on the 1750 and 2000 straps, I have an Asus ROG Strix RX580 O8G with samsung memory, the problem is I can not overclock the memory over 2050 MHz, it hangs my pc, it happens on Claymore, 3DMark and StarCraft 2.
I'm using in AB:
Core Voltage -96mV
CC 1360MHz and 1160MHz (Claymore)
MC 2050MHz
Should I mod the voltages in the bios for it to work fine?, if that's the case I don't get it yet, how must I do it?, for the Memory Voltage seems easy, Core Voltages not so much.
Thx very much.
Carlos
You can try Uber-MIx 3.2, but 2050MHz is good. Not every card can do 2100MHz and more with Uber-mix 3.1. Some of them can't even run 2000MHz.Great guide, thx very much, one question, I have already pasted the uber mix on the 1750 and 2000 straps, I have an Asus ROG Strix RX580 O8G with samsung memory, the problem is I can not overclock the memory over 2050 MHz, it hangs my pc, it happens on Claymore, 3DMark and StarCraft 2.
I'm using in AB:
Core Voltage -96mV
CC 1360MHz and 1160MHz (Claymore)
MC 2050MHz
Should I mod the voltages in the bios for it to work fine?, if that's the case I don't get it yet, how must I do it?, for the Memory Voltage seems easy, Core Voltages not so much.
Thx very much.
Carlos
OK, I reach the same Hashrate than pasting the 1750 strap to the 2000 strap, in that case I can reach 2100 MHz, with 2100 MHz with Uber-mix I get a better Hashrate but its not stable.
How can I get 900 mV in the Core Clock?, its not possible with Afterburner.
Thx again,
Carlos
Follow this to unlock the under volt for afterburner. You will be able to set it to 900 mv after this. https://linustechtips.com/main/topic/89360-cant-adjust-gpu-voltage-msi-afterburner/
July 04, 2017, 11:41:40 AM
Hi Mattthew:
Great guide, thx very much, one question, I have already pasted the uber mix on the 1750 and 2000 straps, I have an Asus ROG Strix RX580 O8G with samsung memory, the problem is I can not overclock the memory over 2050 MHz, it hangs my pc, it happens on Claymore, 3DMark and StarCraft 2.
I'm using in AB:
Core Voltage -96mV
CC 1360MHz and 1160MHz (Claymore)
MC 2050MHz
Should I mod the voltages in the bios for it to work fine?, if that's the case I don't get it yet, how must I do it?, for the Memory Voltage seems easy, Core Voltages not so much.
Thx very much.
Carlos
You can try Uber-MIx 3.2, but 2050MHz is good. Not every card can do 2100MHz and more with Uber-mix 3.1. Some of them can't even run 2000MHz.Great guide, thx very much, one question, I have already pasted the uber mix on the 1750 and 2000 straps, I have an Asus ROG Strix RX580 O8G with samsung memory, the problem is I can not overclock the memory over 2050 MHz, it hangs my pc, it happens on Claymore, 3DMark and StarCraft 2.
I'm using in AB:
Core Voltage -96mV
CC 1360MHz and 1160MHz (Claymore)
MC 2050MHz
Should I mod the voltages in the bios for it to work fine?, if that's the case I don't get it yet, how must I do it?, for the Memory Voltage seems easy, Core Voltages not so much.
Thx very much.
Carlos
OK, I reach the same Hashrate than pasting the 1750 strap to the 2000 strap, in that case I can reach 2100 MHz, with 2100 MHz with Uber-mix I get a better Hashrate but its not stable.
How can I get 900 mV in the Core Clock?, its not possible with Afterburner.
Thx again,
Carlos
Jump to: