[GUIDE][TUTORIAL][XMR,ETH]How To Mod Bios RX470/570/480/580 VEGA Mining 💰⛏ - page 47.

Mattthev

sr. member

Activity: 966

Merit: 359

👉MINING-BIOS.eu💲⛏

Quote from: ne0x86 on July 21, 2017, 11:13:29 AM

Hi, in 4gb cards like 580 should y copy 1:1500 and 2:1500 to 2000 or just 1:1750 and 2:1750 like tutorial

Thanks!

Edit only the memory vendor you have.

Quote from: afm on July 24, 2017, 02:48:13 PM

Can anyone help me understand why my GPU's will require 10-30W more power all of a sudden, after changing nothing except the location.

Same hash rate, same temperature - but each card is consuming between 10 to 30 W more power... all of a sudden?

What does this have in common with bios modding?

Mattthev

sr. member

Activity: 966

Merit: 359

👉MINING-BIOS.eu💲⛏

Quote from: pleasures on July 26, 2017, 05:38:55 PM

thanks for this guide Mattthev, it was extremely helpful. i am however experiencing some small caveats.

I went ahead and modded my XFX RX480 8GB OC version (XFX Radeon GTR RX 480 DirectX 12 RX-480P8DBA6 8GB 256-Bit GDDR5) one by one.

went from stock hashrates of ~650's to a range of 859 h/s to 878h/s mining XMR with claymore, and is remaining pretty stable at the moment (maybe i'll have to report back later)

However, its doing ~960W at the wall for 5 cards and the Claymore software doesn't display the temp of the cards and the fanspeed anymore. Also, If i tinker with anything through MSI Afterburner, the hash rates immediately drop to ~250 h/s per card. What do you think the problems might be?

I'll be PMing you as well for additional help!

Use WattTool. Don't use Claymore. XMR-STAK or SGminer is much better. You need to undervolt the cards and also underclock a little.

Q_R_V

sr. member

Activity: 428

Merit: 250

Inactivity: 8963

Quote from: afm on July 15, 2017, 08:43:16 PM

Can anyone explain why I get these dips in GPU Clock speed?

4 x RX 470's
Corsair RM850x PSU
Power cable going to PSU gets very hot - might even start melting if I leave it.

Dips:

Mining:

Your voltage is probably to high and card hits its power limit, decrease core voltage it should do the trick.

pleasures

newbie

Activity: 28

Merit: 0

thanks for this guide Mattthev, it was extremely helpful. i am however experiencing some small caveats.

I went ahead and modded my XFX RX480 8GB OC version (XFX Radeon GTR RX 480 DirectX 12 RX-480P8DBA6 8GB 256-Bit GDDR5) one by one.

went from stock hashrates of ~650's to a range of 859 h/s to 878h/s mining XMR with claymore, and is remaining pretty stable at the moment (maybe i'll have to report back later)

However, its doing ~960W at the wall for 5 cards and the Claymore software doesn't display the temp of the cards and the fanspeed anymore. Also, If i tinker with anything through MSI Afterburner, the hash rates immediately drop to ~250 h/s per card. What do you think the problems might be?

I'll be PMing you as well for additional help!

forato

full member

Activity: 237

Merit: 100

Hi Mattev,

I just send you an e-mail:

Hello,

My name is Forato and got your e-mail at Bitcointalk Fórum.

I have this GPU's model:

8gb · ellesmere rx 480 xxx-xxx-xxxx samsung · k4g80325fb

8gb · hawaii pro r9 390 113-c6792000-x01 sk hynix · h5gc4h24ajr

4gb · ellesmere rx 480 113-d0090101_103 samsung · k4g41325fe

8gb · hawaii pro r9 390 113-grenada_pro_c671_d5_8gb_hy_w81 sk hynix · h5gc4h24ajr

8gb · ellesmere rx 480 113-xfxd009-100 samsung · k4g80325fb

4gb · ellesmere rx 470 113-d0000301_101 sk hynix · h5gc4h24ajr

8gb · hawaii pro r9 390 113-2e3240u-x4a sk hynix · h5gc4h24ajr

4gb · ellesmere rx 480 113-1e353bu.o4r elpida · edw4032babg

Can you sell me bios to this GPU's?

Tks,

Forato

afm

newbie

Activity: 12

Merit: 0

Can anyone help me understand why my GPU's will require 10-30W more power all of a sudden, after changing nothing except the location.

Same hash rate, same temperature - but each card is consuming between 10 to 30 W more power... all of a sudden?

ne0x86

newbie

Activity: 81

Merit: 0

Hi, in 4gb cards like 580 should y copy 1:1500 and 2:1500 to 2000 or just 1:1750 and 2:1750 like tutorial

Thanks!

afm

newbie

Activity: 12

Merit: 0

Can anyone explain why I get these dips in GPU Clock speed?

4 x RX 470's
Corsair RM850x PSU
Power cable going to PSU gets very hot - might even start melting if I leave it.

Dips:
https://image.ibb.co/mSP89a/dips.png

Mining:
https://image.ibb.co/fJywvF/mining.png

drsquall

newbie

Activity: 11

Merit: 0

Hello, do I need to use Pixel Clock Patcher after bios modding my MSI RX 580 Gaming X (Samsung)? Just read some comments that some cards do not need it? Thanks!

Mattthev

sr. member

Activity: 966

Merit: 359

👉MINING-BIOS.eu💲⛏

Quote from: willi9974 on July 14, 2017, 05:37:17 AM

If i have all the Same cards
Is it better to save, edit and flash back the own card bios from euch card or can i mod One bios and flash this to each card?

Better is flash the card with it's own mod bios, but if they are all same there should be no problem flash it with one bios. Atiwinflash wouldn't allow you flash the bios to different card. Check if they are all with same memory vendor, otherwise you need to edit the other vendor too.

willi9974

legendary

Activity: 3654

Merit: 3003

Enjoy 500% bonus + 70 FS

If i have all the Same cards
Is it better to save, edit and flash back the own card bios from euch card or can i mod One bios and flash this to each card?

drsquall

newbie

Activity: 11

Merit: 0

Thank you very much! Will try this

Mattthev

sr. member

Activity: 966

Merit: 359

👉MINING-BIOS.eu💲⛏

Quote from: drsquall on July 14, 2017, 04:21:59 AM

Thank you very much for your response. Sorry for this noob question. But I dont know which straps I will use for my MSI RX580 Gaming X (Samsung). Is it the 2000? Or both 1750 and 2000. I`ve seen the instruction that for 580, just copy the uber mix to both 1750 and 2000. However, I`ve also read some comments that they just copy it to 2000 only. Can you help me which one do I need to do to get the best mining performance on my gpu? Thank you very much.

Like I haven't answered it already... just copy to both.

drsquall

newbie

Activity: 11

Merit: 0

Quote from: Mattthev on July 14, 2017, 04:06:19 AM

Quote from: drsquall on July 13, 2017, 09:46:58 PM

Hi, just want to ask if the Uber mix 3.1 is tested for RX 580 specifically for MSI RX 580 Gaming X (samsung)? And do I need to copy and paste the uber mix 3.1 to both 1750 and 2000 timings and not on the 2000 timing only? And also, will it lower my GPU power consumption even if I just edited the timings and not the voltage in the Bios Editor? Thank you very much.

Edit only those straps you will use. The card has 2000MHz by default, isn't it? No, changing the timings will have same or slightly higher power consumption. You need lower voltages for less power consumption.

Thank you very much for your response. Sorry for this noob question. But I dont know which straps I will use for my MSI RX580 Gaming X (Samsung). Is it the 2000? Or both 1750 and 2000. I`ve seen the instruction that for 580, just copy the uber mix to both 1750 and 2000. However, I`ve also read some comments that they just copy it to 2000 only. Can you help me which one do I need to do to get the best mining performance on my gpu? Thank you very much.

Mattthev

sr. member

Activity: 966

Merit: 359

👉MINING-BIOS.eu💲⛏

Quote from: drsquall on July 13, 2017, 09:46:58 PM

Hi, just want to ask if the Uber mix 3.1 is tested for RX 580 specifically for MSI RX 580 Gaming X (samsung)? And do I need to copy and paste the uber mix 3.1 to both 1750 and 2000 timings and not on the 2000 timing only? And also, will it lower my GPU power consumption even if I just edited the timings and not the voltage in the Bios Editor? Thank you very much.

Edit only those straps you will use. The card has 2000MHz by default, isn't it? No, changing the timings will have same or slightly higher power consumption. You need lower voltages for less power consumption.

Mattthev

sr. member

Activity: 966

Merit: 359

👉MINING-BIOS.eu💲⛏

Quote from: justchil on July 13, 2017, 07:49:35 AM

Is this the 470 11256-31-21G (bios 113-2E353FU.M58) with Samsung K4G41325FC memory? If so I may be interested in some help. I have the cards running 27.7MH's with 1200 clock / 1900 memory using 1750 straps. I can't get any of the cards to run higher than 1900mhz.

It should be 11256-31-10G, but should be same it uses same Samsung memory. Uber-mix 3.1 isn't working very well on some of those cards.

drsquall

newbie

Activity: 11

Merit: 0

Hi, just want to ask if the Uber mix 3.1 is tested for RX 580 specifically for MSI RX 580 Gaming X (samsung)? And do I need to copy and paste the uber mix 3.1 to both 1750 and 2000 timings and not on the 2000 timing only? And also, will it lower my GPU power consumption even if I just edited the timings and not the voltage in the Bios Editor? Thank you very much.

justchil

member

Activity: 92

Merit: 10

Quote from: Mattthev on July 09, 2017, 02:55:33 AM

Quote from: StraabdenDaals on July 08, 2017, 11:29:56 PM

I have the mining version of rx 470 (https://www.newegg.com/Product/Product.aspx?Item=N82E16814202292) and I'm new messing with the bios and flashing GPU's - is it safe to follow these instructions and use UberMix v3.1, or should I wait for more information to come out?

Yes.
I was doing bios for this card for one of my client.

Is this the 470 11256-31-21G (bios 113-2E353FU.M58) with Samsung K4G41325FC memory? If so I may be interested in some help. I have the cards running 27.7MH's with 1200 clock / 1900 memory using 1750 straps. I can't get any of the cards to run higher than 1900mhz.

tiger5000

newbie

Activity: 2

Merit: 0

Hi Mattthev,

it seems that you have magician hands when it comes to tune the gpu bios. I am interested in your service.

I opened this topic yesterday at bitcointalk https://bitcointalksearch.org/topic/6-x-gigabyte-gaming-rx580-8gb-hynix-135-mhs-only-225-each-2013941
There are some screenshots and the origal bios.rom file.
The GPU is Gigabyte Gaming RX580 8GB Hynix with only 22.5 MH/S

Please take a look and let me know how much you can tune the MH/S up and how much you can tune the watt down.

Thank you!

Mattthev

sr. member

Activity: 966

Merit: 359

👉MINING-BIOS.eu💲⛏

Quote from: Justwondering on July 09, 2017, 03:16:51 AM

Hi Matthew, what would you charge to mod my bios file? Should I pm you?

Yep, or better write to e-mail.

Topic: [GUIDE][TUTORIAL][XMR,ETH]How To Mod Bios RX470/570/480/580 VEGA Mining 💰⛏ - page 47. (Read 221013 times)