Topic: GUIMiner - bounty for Phoenix version [finished] (Read 48519 times)

It's in the OP !!! https://bitcointalksearch.org/topic/gui-mining-updated-dec-3-with-7970-bugfix-also-supports-stratum-3878

Ps : This is a two years old thread, Just don't...

And where can this phoenix version be downloaded from ?

Download from here.
http://forum.bitcoin.org/?topic=3878.0
No need to give donation to get miner. But still donations to developer is welcome.
You can find details in the 1st post on that link.

Great, thank you.

Is it still by email or ist there a link for downloading (possibly after donation) ?

This is my MSI 5850 Twin Frozr II.
As you can see, ive pumped my Core Clock up to 1010 Mhz and my Mem Clock down to 300 and my Voltage to max, 1.3V.
This first one was on OpenCL miner with : "-v -w128 -f1" and temps at usualy 84°C



The second one was on Phoenix with : "VECTORS BFI_INT WORKSIZE=128 FASTLOOP=false AGGRESSION=12 -k phatk" and my Temp went up to 89°C.



Thats an aweasome increase of ~14 Mhash/s, but the price is kinda high, Ive order 2 more fans for cool air intake and hope i can get it abit under control.
when i saw the 395 i thought "Damit, i want to break the 400 Mhash/s mark!!!"

Any room for improvments? since im new to mining and got still alot to learn.

Edit1: just now ive read http://bitclockers.com/forums/index.php?topic=9.msg17#msg17 that i should leave FASTLOOP on.

@ kiv, i think you can lock this thread with a link & note to visit your main thread, so no one writes here.

A big thanks to everyone who donated for this! We didn't quite reach the 20 BTC, but the exchange rate went up enough in the meantime that I felt fairly compensated

I've merged the Phoenix code into the main GUIMiner and it's now part of the latest release in the main GUIMiner thread.

I am now using Phoenix GUIminer for my pc(i sent 2 btc & kiv emailed me) & now Phoenix rising for SH pc.
SH pc gets 430-435 Mhash/s for each 5870 card.

I also get the same speed using cmd option.
Its PHATK which gives more hash/s.

I use this as extra flags DEVICE=0 VECTORS BFI_INT BIT_ALIGN FASTLOOP=false AGGRESSION=12 -k phatk
Windows 7 , 32 bit with Aero enabled with core clk 984 & mem clk = core clk/3 thats 328 for 5870 card.
For 6870 card(my pc) i am getting 314 Mhash/s using phatk with core clk 1029 & mem clk = (core clk/3) + 14 = 357.

Are you getting 430+ with poclbm GUIminer or the phoenix one? Would you also care to share what clocks, volts and flags you are using?

I am in no way doubting what you have achieved. I ask because i would like to acheive a similar figure.

I'm currently getting around 420 Mhash/s with 1000 [email protected], 300 mem and -v in the flag section. Not a bad result but I was hoping to squeeze a little more out. I have tried several other flag combinations but I seem to need -v. If I put anything else it either stays the same or makes it worse.

Feature needed in GUIminer.
The CPU usage problem can be controlled by using affinity.
Some one told to set all the miners, ie, all the running instances phoenix.exe to only one core & it will reduce usage. I tried it & its working.
Only way to set affinity now is through task manger & selecting the particular phoenix.exe.
But the affinity setting is temporary & it goes back to all core , if stop mining & start mining used.

This affinity feature, to run every instance of phoenix.exe to particular cpu core must be implemented & it must be saved.
So, no need to change every time, miner start or stops.

@Kiv
Please add the affinity option to phoenix & poclbm.

The maximum speed for 5870 card comes with mem clk=1/3 of core clk.
I am getting 430+ Mhash/s

the donations dropped back to 10 now, apparently someone sent out 4 btc from the ledger O.o

I seem to get much higher % of stale shares with phoenix than with poclbm. Something like 4-5% vs <1%.

Is this common for phoenix, or is it a GUIMiner problem?

How do you know what the right mem speed is?  1/3 gpu clock?

with regards to phatk, you have to change your mem clock speed to the right one. im at 973gpu 325 mem

you get considerably more performance. for 5xxx series, i use w256 and gained more doing that. w128 seems to be the better one for 69xx series

Looks like 14'ish.

http://blockexplorer.com/address/12LE5XsBr3BgdWcgmyV4LHKhFXdHn8UBj6

What's the tally so far for donations?

I do have different cards, but they are all in different systems.  The 6950 is by itself in one box, the 5850's are all together in another box.  I only have one 'mixed' box with 1 5850 and 2 5830's.  They all have the exact same catalyst version since I only installed a single driver on them recently and I can verify that by looking at each GPU individually in MSI afterburner and they all show up with 11.5.  Also, 2.4 is the base stream install for all of them.

I'll still monkey around with them and play around with one box to see if I can tweak it at all.  Thanks for the info...

I think there are some thing you messed up.
I always go same cards in a single pc.
Since you have different cards, you must have installed different catalyst from 10.10 to 11.5.
Install only one catalyst version to all cards. For this go for safe side. Install 11.5 & 2.4 for all the cards.
Uninstall all catalyst drivers & take out all cards.
Put highest card first, thats 6000 series, 6950 & install catalyst.
In catalyst install only these 3 only.
ATI display driver, ATI catalyst install manager, APP 2.4 & if required vc++.

If you have installed by selecting express, uninstall everything & go by custom.
The catalyst control center v1 or v2 completely messes with settings given by other softwares.
It silently kills the setting from Afterburner & uses its own setting, which won't allow you to get more hash & it will always say that card is over clocked, but it doesn't OC.

Then put another card & install above catalyst again & repeat it for all cards.

In MSI Afterburner, go to settings & remove check mark against, "synchronize settings for similar graphics processors"
This makes, you can OC each card individually.
You just have to select the card in the drop down menu above the check box & clicking ok, you will see, everything changed in main window of Afterburner.

I am also getting lot of stales in slush pool, while in others very few. This is not fault in GUIMiner, may be its due to slush so far not supporting LP.

I have another pc & in that 2 cards are running now, both are 5870 & both mining at 430+ Mhash/s using GUIMiner.
In cmd prompt, also i got the same speed using phatk.

Just tweak around & you will get more hash.

Yeah, Kiv does actually say to do File -> New Other Miner in the OP, but I missed it the first time as well.

Doesn't matter on my side, no matter what I do, phoenix just won't give me any better results than poclbm, even with phatk.  Maybe I'm close to the limit I could get already and there's just no headroom, dunno.  Glad it's boosting power for some of you guys though.