Haasonline Simple Trade Bot For BTCe and Bitstamp[Main topic] - page 29.

bigdave

full member

Activity: 224

Merit: 100

Quote from: krach on June 10, 2014, 04:25:01 PM

Quote

Insert Quote
I apologize if it seems like I'm spamming but I've run into another issue. My 0.02BTC deposit on Bitfinex has gone through and I have setup the API keys and put them into the trade bot software. When I entered the API keys it said the connection was successful. However when I try to setup a trade bot for Bitfinex it does not read my current BTC balance nor my USD balance. I would expect it to show 0.02BTC and 0.00USD. In the debug messages window it keeps throwing Trade amount cannot be calculated ....

hi,
Is there any ammount in the "bought invested side" "sold side" ? if so you may need to manualy set the bot coin position to -bought or sold- in order to get it to start. If you have 0 $ in your account but the bot is trying to buy with $ then you might get that message I think.
-krach

It is showing 0 on the bought and sold side. However the website shows I have a BTC balance of 0.02BTC. I have tried changing the coin position to both bought and sold and that did not cause it to update.

krach

legendary

Activity: 1851

Merit: 1020

Get Rekt

Quote

Insert Quote
I apologize if it seems like I'm spamming but I've run into another issue. My 0.02BTC deposit on Bitfinex has gone through and I have setup the API keys and put them into the trade bot software. When I entered the API keys it said the connection was successful. However when I try to setup a trade bot for Bitfinex it does not read my current BTC balance nor my USD balance. I would expect it to show 0.02BTC and 0.00USD. In the debug messages window it keeps throwing Trade amount cannot be calculated ....

hi,
Is there any ammount in the "bought invested side" "sold side" ? if so you may need to manualy set the bot coin position to -bought or sold- in order to get it to start. If you have 0 $ in your account but the bot is trying to buy with $ then you might get that message I think.
-krach

bigdave

full member

Activity: 224

Merit: 100

I apologize if it seems like I'm spamming but I've run into another issue. My 0.02BTC deposit on Bitfinex has gone through and I have setup the API keys and put them into the trade bot software. When I entered the API keys it said the connection was successful. However when I try to setup a trade bot for Bitfinex it does not read my current BTC balance nor my USD balance. I would expect it to show 0.02BTC and 0.00USD. In the debug messages window it keeps throwing Trade amount cannot be calculated ....

I noticed on Bitfinex site they only require 3 confirmations for BTC deposits however now it has been more than 6 confirmations.

Any ideas?

bigdave

full member

Activity: 224

Merit: 100

@Stephan,

I just created an account on Bitfinex and attempted to setup a trade bot with the API keys before my BTC deposit hit (so I had a 0 BTC & USD balance) and when I tried to save the API keys in the trade bot software it would throw a connection error. However once the deposit hit it accepted it and saved it. Just fyi...

bigdave

full member

Activity: 224

Merit: 100

I'm curious what everyone's opinion is... what trade indicators do you like the best?

bigdave

full member

Activity: 224

Merit: 100

So I just purchased the upgrade from the beginner to the simple license. However the website under My Account still shows the license key for the beginner license. What do I need to do to get the upgrade to the simple license version?

gujo82

member

Activity: 71

Merit: 10

Quote from: bigdave on June 09, 2014, 11:55:28 AM

Quote from: gujo82 on June 09, 2014, 11:52:05 AM

Quote from: bigdave on June 09, 2014, 09:32:33 AM

One other thing is I'm using the beginner license which has limited functionality. I'm hoping once I upgrade to the simple license that with the dynamic drop-loss and roof safeties I won't ever have to adjust it. Just let it do its thing and watch the profits.

Ahh i see. So the "trade now" part is only really another frontend for trading directly on each exchange? I have only setup 2 bots sofar, with the percentage earning and avoid fee parameters (using advanced license), but sadly experience with cryptsy is what it is.. it wont cancel orders after the timeout is passed Sad

The buy/sell now buttons are simply to put in an instant order on the exchange.

I have 2 bots setup as well (2 max on beginner). One trades on Bitstamp and then other on BTC-e. Both seem to work well for me so far.

Right right

Have only tried on btc/altcoins sofar, but perhaps i should give btc/usd a try also.

Seems its not possible to use bitfinex currently, server says API is connected but balance still shows 0 Huh

bigdave

full member

Activity: 224

Merit: 100

Quote from: gujo82 on June 09, 2014, 11:52:05 AM

Quote from: bigdave on June 09, 2014, 09:32:33 AM

One other thing is I'm using the beginner license which has limited functionality. I'm hoping once I upgrade to the simple license that with the dynamic drop-loss and roof safeties I won't ever have to adjust it. Just let it do its thing and watch the profits.

Ahh i see. So the "trade now" part is only really another frontend for trading directly on each exchange? I have only setup 2 bots sofar, with the percentage earning and avoid fee parameters (using advanced license), but sadly experience with cryptsy is what it is.. it wont cancel orders after the timeout is passed Sad

The buy/sell now buttons are simply to put in an instant order on the exchange.

I have 2 bots setup as well (2 max on beginner). One trades on Bitstamp and then other on BTC-e. Both seem to work well for me so far.

gujo82

member

Activity: 71

Merit: 10

Quote from: bigdave on June 09, 2014, 09:32:33 AM

One other thing is I'm using the beginner license which has limited functionality. I'm hoping once I upgrade to the simple license that with the dynamic drop-loss and roof safeties I won't ever have to adjust it. Just let it do its thing and watch the profits.

Ahh i see. So the "trade now" part is only really another frontend for trading directly on each exchange? I have only setup 2 bots sofar, with the percentage earning and avoid fee parameters (using advanced license), but sadly experience with cryptsy is what it is.. it wont cancel orders after the timeout is passed Sad

bigdave

full member

Activity: 224

Merit: 100

One other thing is I'm using the beginner license which has limited functionality. I'm hoping once I upgrade to the simple license that with the dynamic drop-loss and roof safeties I won't ever have to adjust it. Just let it do its thing and watch the profits.

bigdave

full member

Activity: 224

Merit: 100

Quote from: gujo82 on June 09, 2014, 07:45:53 AM

Quote from: bigdave on June 08, 2014, 07:32:24 PM

Quote from: bigdave on June 08, 2014, 06:59:47 PM

I am seeing an issue when trying to use the Buy Now button. I have my trade amount set to percentage with bought side set to 75% and the sold side set to 100%. When I hit Buy Now I would expect the trade bot to spend whatever cash is available and buy all the coins it can based on percentage. However I am getting an order failed message.

I am seeing this problem with BTC-e but I imagine I would also see it with Bitstamp and others although I have not tested Bitstamp.

Nevermind I figured it out. Looks like BTC-e has a minimum limit of 0.01btc on buy/sell.

The approach you mention in your posts - can it be used as somewhat of a "manual" tradebot? if you want to initiate trades yourself and still be "in control"...?

Yes you can but it also defeats the purpose of using the bot to trade automatically. I'm still working on fine tuning my setup. My goal is to set it and maybe only have to adjust it once a week. We'll see....

gujo82

member

Activity: 71

Merit: 10

Quote from: bigdave on June 08, 2014, 07:32:24 PM

Quote from: bigdave on June 08, 2014, 06:59:47 PM

I am seeing an issue when trying to use the Buy Now button. I have my trade amount set to percentage with bought side set to 75% and the sold side set to 100%. When I hit Buy Now I would expect the trade bot to spend whatever cash is available and buy all the coins it can based on percentage. However I am getting an order failed message.

I am seeing this problem with BTC-e but I imagine I would also see it with Bitstamp and others although I have not tested Bitstamp.

Nevermind I figured it out. Looks like BTC-e has a minimum limit of 0.01btc on buy/sell.

The approach you mention in your posts - can it be used as somewhat of a "manual" tradebot? if you want to initiate trades yourself and still be "in control"...?

bigdave

full member

Activity: 224

Merit: 100

Quote from: bigdave on June 08, 2014, 06:59:47 PM

I am seeing an issue when trying to use the Buy Now button. I have my trade amount set to percentage with bought side set to 75% and the sold side set to 100%. When I hit Buy Now I would expect the trade bot to spend whatever cash is available and buy all the coins it can based on percentage. However I am getting an order failed message.

I am seeing this problem with BTC-e but I imagine I would also see it with Bitstamp and others although I have not tested Bitstamp.

Nevermind I figured it out. Looks like BTC-e has a minimum limit of 0.01btc on buy/sell.

bigdave

full member

Activity: 224

Merit: 100

I am seeing an issue when trying to use the Buy Now button. I have my trade amount set to percentage with bought side set to 75% and the sold side set to 100%. When I hit Buy Now I would expect the trade bot to spend whatever cash is available and buy all the coins it can based on percentage. However I am getting an order failed message.

I am seeing this problem with BTC-e but I imagine I would also see it with Bitstamp and others although I have not tested Bitstamp.

KS

sr. member

Activity: 448

Merit: 250

Hi Stephan,

When I use http://localhost:8090/exchanges_btcmarketnews.html and do a refresh on the page with Firefox or Waterfox, the HTS Launcher process goes to 100% CPU usage and stays there.

Only workaround I found so far is to exit the server and restart it with HTS Launcher.exe.

Also, no matter what, HTS doesn't start with Windows. I tried the registry run key, start menu startup folder shortcut with admin rights on the exe/shortcut etc. No can do.

Any idea?

bigdave

full member

Activity: 224

Merit: 100

I want to upgrade to the simple license from beginner. Can someone pm me the coupon to use to get the discount for the upgrade? Thanks!

krach

legendary

Activity: 1851

Merit: 1020

Get Rekt

vericoin is pertty new to cryptsy, it should be added at the next update to the bot.

gujo82

member

Activity: 71

Merit: 10

Quote from: krach on June 08, 2014, 02:52:59 PM

Quote

Insert Quote
do i need to change some configuration to be able to trade all coins on for example cryptsy? using the advanced server (latest version), and i only have 10 coins to choose from when configuring a tradebot for cryptsy

Go to "server settings" in the classic interface , or right click the icon that is near the clock in windows.
Then when in the server settings go to the tab "price trackers" tick the box "alt coins"
Then press save and the bot will restart with all of the coins on cryptsy.

Thanks, actually found it at the website and deleted my post

although, for some reason the VRC (vericoin) is missing from the cryptsy config..?

krach

legendary

Activity: 1851

Merit: 1020

Get Rekt

Quote

Insert Quote
do i need to change some configuration to be able to trade all coins on for example cryptsy? using the advanced server (latest version), and i only have 10 coins to choose from when configuring a tradebot for cryptsy

Go to "server settings" in the classic interface , or right click the icon that is near the clock in windows.
Then when in the server settings go to the tab "price trackers" tick the box "alt coins"
Then press save and the bot will restart with all of the coins on cryptsy.

krach

legendary

Activity: 1851

Merit: 1020

Get Rekt

Quote

get this to work with mintpal and bittrex and i will buy

mintpal´s api is still being tested. When they get their api figured out then it should be on the top of the list of exchanges to intergrate.

Topic: Haasonline Simple Trade Bot For BTCe and Bitstamp[Main topic] - page 29. (Read 416810 times)