Topic: Haasonline Simple Trade Bot For BTCe and Bitstamp[Main topic] - page 97. (Read 416703 times)

True, if all goes well then i will be release a new version tomorrow. Everything is ready and tested here, but i am still working on Cryptsy. There is a problem with the API is the last release and i was not able yet to find out the source of the problem.

@krach:
The trade-amount checks 2 things; First if you enter 0 it will turn red and second if you put in more coins then you have then the field will be red turn red too. The amount of coins you can put in is depending on the coin position and on your wallet. So i suggest you take a look at that.

Please note:
A lot of people get also confused by the fact that if you coin position is "Sold" then you are not owning the same type of coins as you can enter into the trade amount. So a conversion is needed, just like you do at the exchange website.

Tip:
Select All-in, wait a few seconds and the all-in will show 90% of the current wallet value at the selected coin position.

Known problems:
I recommend to use a lower trade-amount or to use the all-in option when trading 24/7. Overhead in both wallet sides is recommended to avoid any possible rounding problems.

Known issues:
Some people use 2 trade-bots on the same exchange and currency, of course you need to divide the trade-amount in this case and never use the all-in in this case. (tip: with 2 trade-bots on 1 exchange and 1 currency you can setup 2 different strategies and increase your profit this way)

In the new version no matter what I put in ammount the field is red. In the old versions that meant that you were making a loss due to the exchange fees. I cant change the mininum raise or drop so I dont understand why that is red.  I created a price change indicator well above the exchange costs and left the bot running, no action in the bot siginal, the RSI seem to be working but the bot singal is flat and the price difference indicator is flat. Maybe just not enought market movement? Anyone have an idea?

If it reaches the sell trigger and it doesn't sell, that means the indicator you are using is not giving a Sell signal. This can be 'normal' or it can mean a problem with the indicator.

Then, if the market goes down fast, it might already be out of the sell trigger before the indicator gives a Sell signal, so then it wouldn't sell. It's not cool but it's not a problem of the Bot, sometimes indicators don't respond fast enough to certain market movements, they're not perfect.

Personally it has been working well for me, especially after last update. And next update looks even better with the solutions Stephan is working on for out of scope, which is one of the remaining issues right now.

It works for me. Which version are you using?
Maybe if you post a screenshot of your problems it'll be easier to determine the problem.

For some reason I can't get the bot to make a sell.

It will buy, it will hit the sell trigger, but it won't execute the trade.

Not trying to bash your software but I have never gotten it to work correctly, not once.

The very first time I used this software the functions were reversed and it was selling when it was supposed to be buying, vice versa.

Now it won't even execute trades at the proper triggers.

If the intentions of this bot are to lose money, then it is a success.

I believe a lot of the logic behind this software is incorrect.

Does anyone else have a success story with this bot?

So far everything ok and dev response to my question:
The price difference indicator is working based on the last buy and sell prices. The indicator has a relative relation to the currency. So if you set 400 as last buy and sell values and you enter 10 for sell and -10 for buy the trigger prices will become 410 and 390.

Let's test it

Strangely, given how LTC is going ... the benchmarking seems to show that one indicator works better than having more for me - does this match with anyone else's results?

Also, the historic data will be an incredible godsend, as I think sometimes it's just pot luck on how things work out over a shorter (under 5000 updates) period. 

I know there is no any bots which can trade alone, but it may help me to make open and close orders that I already plan to use.
I miss 1 to 2 good trade moment/day only because It's too risky just open but no close.
My Bot is now active.
My settings are simple: Buy after chrash, sell when pull back 50%
I hold usd and accept the risky, that I may need to stay on btc for longer time, if pull back not happen.

@halibit:
Eur/Usd of BTC-e will be added at the next release. I thought it as present already but is seems i overlooked it.

@nightengale:
The market prices are changing every day, you stated $160, but maybe it lower today. The shareholders of Haasonline do not look at the market prices. They look to the crypto coins and express the profit in crypto coins. So a better question wil be will it be worth the coins? And as developer i can say yes, the reason in simple. This program offers you the capabilities to make high profits. It does the job it promisses, the support is good (at least i hope) and because of continues updates the software stays at a good position in the overall market.

And please post your findings here, everybody will benefit from it.

Just FYI, writing a bot of your own can be done easily in 48 hours or so if you have the skills.

You also have to understand trading bots are very hard to get right, so I'm not sure if you could call buying any bot a good investment. I see them more as play things.

I can tell you on Monday.
First I test it couple days.

I buy it because if I make own api call bot software, it will take few days and then it's way more expensive for me.
But now I can't make any changes to code and I have to trust the dev..
but I hope this is good invest  

... if this sucks, I will make own simple bot code and share it on github... or here 

I'm in the process of reading through this thread. I guess my next question is, is this software really worth $160? And with no refund... I'm hoping to hear about some positive experiences before buying.

I just bought it and learning..

For me,  all indicators are wortheless so far.

I just sent support ticket as follow and will see when I get answer..

I want simple settings:
Example btc/usd price is 400..
If btc goes higer 10usd, I want to sell
and opposite way, if price goes down -10, I want to buy
... and repeat again, but new zeropoint is where trade is closed (I mean when buy and sell orders are both done)

I try to set "price difference" indicator for that, but not working…

Can you tell me what indicator pose to use, and what settings, please.
Thank you

Other ticket I wrote:
There is no btc-e USD/EUR market available.

I will tell if I get answer...

There's 28 pages worth of experience.  

Are there any reviews out there for this software? Considering purchasing, but would like to get some perspective from people who have tried it...

I don't want to spam the site, but can I get opinions on BTCChina for/against? This is the last time I will mention it

The 0% commission means that literally any kind of tiny movement will be easy to profit from.  There are so many manual pricing moves with what appears to be clear momentum on a regular basis as more and more amateur traders jump on.  I'd love a way to set a stop-loss on my manual trading there!  I don't know how long this will last though - I presume they aren't holding it at 0% forever...


With regards to values sliding out of scope - there's a trading method (more 'investment' I guess), which constantly sells a fraction when the value trends a percentage upwards, and buys a fraction when the value trends downwards by that same user-defined percentage.  I'm told that it's better than just buying and holding in the long run.  Do those of you who have a greater trading background want to weigh in on this?

@Stephan224 I like the drop-loss adjustment.  Should save us from sharp bear traps haha.

I will be disabling the trade-amount safety. It seems some people having trouble with it and that was not the meaning of this. At the next release it will only turn red if the trade-amount is 0. And i am trying to get the all-in to work at near all-in values, instead of the 90% right now.

This is something new that i will introduce at the new version:


I guess (or hope at least) the window will speak will itself. It shows the ability to adjust the drop-loss dynamicly and is shows the ability to bypass the minimum riase and drop amount.

This will be the fist part of the advanced settings that i will be introducing. On the background i am working on 2 more advanced settings. For now, i hope everybody will like these changes that are coming.

I am still working on the new release because i still have trouble with Cryptsy. But as soon as this is solved and the all-in part is better to i will release a new version.

BTW: I have got the bitcoinchart API working, so loading historical data is coming too. But after the next release. Same applies to the CSV export function i promissed.

@juve4v:
Did the get the latest version based on the advice of CryptoMaster?
Update notification per mail are down, so you are right on this. But if you check here or on the website once in a while you can see if there are updates. I will try to restore the mailing system i used before.

@leonts87:
I am happy to help, especially if you explain whats is wrong.

@seanrarey:
You can bypass the installation procedure. Just copy the files from the folder located in the ZIP to any location you want and run the software. You can even recycle the setting XML this way.

Simply login into your account and click the Download link, you will download the newest version.

I bought this bot some time ago -wanted it specifically for Bitstamp- and payed 0.6 BTC for it, and when new version came out, I was always mailed by support the new one and the download link, till one month ago. For the actual version I didn't receive any mail and wrote to support 2x mails asking for new one  but no answer.
When I bought it I understood it will be future version support and download but it doesn't seem this way.

I wanna my money back!